Más vendido

ThinkRobotics

Módulo de relé WiFi ESP01S

SKU: ELC8023

₹ 334.99 ₹ 370.00

En stock | Listo para enviar

Módulo de relé WiFi ESP01S₹ 334.99
Ask AI about this product
Característica:
Este relé ESP-01/01S se basa en el módulo WIFI ESP-01/01S. Está diseñado para hogares inteligentes, internet y otros proyectos de bricolaje (DIY). Con este relé inteligente, es fácil crear su propio interruptor inteligente para controlar cualquier dispositivo desde su teléfono en cualquier lugar.

El módulo ESP no está incluido.
 
Parámetros:
  • Voltaje de funcionamiento: DC5V-9V
  • Corriente de funcionamiento: ≥250mA
  • Distancia de transmisión: distancia máxima de 400 m (entorno abierto)
  • Carga: 10A/250VAC 10A/30VDC, el relé funciona 100 000 veces
  • Tamaño del producto: 37 * 25 mm
 
Uso:
  • Descargue el firmware al ESP-01/01S a través de un adaptador USB-Serial. El enlace para descargar los archivos: https://github.com/IOT-MCU/ESP-01S-Relay-v4.0
  • Conecte el módulo ESP-01S al cabezal de 2*4 pines después de descargar el código al ESP-01/01S.
  • Conecte una alimentación de CC de 5V-9V a GND y VCC.
  • Instale ESP8266_Controller.apk en su teléfono Android.
  • Conecte la red del teléfono móvil al punto de acceso enviado por el ESP-01/01S: ESP8266_XXX, la contraseña es: 12345678
  • Configure la dirección IP, la IP predeterminada es: 192.168.1.1
  • Haga clic en GPIO 0 ON OFF para controlar.
Especificaciones

Recursos

Hoja de datos

Código de ejemplo

Tutorial
What is included with the package and what else do I need?
The ESP module is not included. You need an ESP 01 or ESP 01S module and you must flash the provided firmware using a USB serial adapter from the link https://github.com/IOT-MCU/ESP-01S-Relay-v4.0
What power supply does the device require?
The unit operates from DC 5V to 9V and needs at least 250 mA of current. Connect to the GND and VCC pins to power it.
What load can the relay switch and how many cycles is it rated for?
The relay supports 10 A at 250 VAC or 10 A at 30 V DC and is rated for up to 100000 switching cycles.
How do I set up and control the relay with my phone?
Install the ESP8266_Controller.apk on an Android phone, connect to the hotspot broadcast by the ESP device with SSID ESP8266_XXX and password 12345678, set the IP to 192.168.1.1, and use the GPIO 0 ON OFF controls.
What is the wireless range for remote control?
The maximum transmission distance is 400 meters in open environment.
Welcome to the discussion thread for Módulo de relé WiFi ESP01S
Feel free to ask questions, share tips or report issues.
Add Post

For more discussion Click Here

Complete el siguiente formulario y nuestro equipo se pondrá en contacto con usted para ofrecerle precios por volumen.

Descripción
Ask AI about this product
Característica:
Este relé ESP-01/01S se basa en el módulo WIFI ESP-01/01S. Está diseñado para hogares inteligentes, internet y otros proyectos de bricolaje (DIY). Con este relé inteligente, es fácil crear su propio interruptor inteligente para controlar cualquier dispositivo desde su teléfono en cualquier lugar.

El módulo ESP no está incluido.
 
Parámetros:
  • Voltaje de funcionamiento: DC5V-9V
  • Corriente de funcionamiento: ≥250mA
  • Distancia de transmisión: distancia máxima de 400 m (entorno abierto)
  • Carga: 10A/250VAC 10A/30VDC, el relé funciona 100 000 veces
  • Tamaño del producto: 37 * 25 mm
 
Uso:
  • Descargue el firmware al ESP-01/01S a través de un adaptador USB-Serial. El enlace para descargar los archivos: https://github.com/IOT-MCU/ESP-01S-Relay-v4.0
  • Conecte el módulo ESP-01S al cabezal de 2*4 pines después de descargar el código al ESP-01/01S.
  • Conecte una alimentación de CC de 5V-9V a GND y VCC.
  • Instale ESP8266_Controller.apk en su teléfono Android.
  • Conecte la red del teléfono móvil al punto de acceso enviado por el ESP-01/01S: ESP8266_XXX, la contraseña es: 12345678
  • Configure la dirección IP, la IP predeterminada es: 192.168.1.1
  • Haga clic en GPIO 0 ON OFF para controlar.
Especificaciones

Recursos

Hoja de datos

Código de ejemplo

Tutorial
Preguntas frecuentes
What is included with the package and what else do I need?
The ESP module is not included. You need an ESP 01 or ESP 01S module and you must flash the provided firmware using a USB serial adapter from the link https://github.com/IOT-MCU/ESP-01S-Relay-v4.0
What power supply does the device require?
The unit operates from DC 5V to 9V and needs at least 250 mA of current. Connect to the GND and VCC pins to power it.
What load can the relay switch and how many cycles is it rated for?
The relay supports 10 A at 250 VAC or 10 A at 30 V DC and is rated for up to 100000 switching cycles.
How do I set up and control the relay with my phone?
Install the ESP8266_Controller.apk on an Android phone, connect to the hotspot broadcast by the ESP device with SSID ESP8266_XXX and password 12345678, set the IP to 192.168.1.1, and use the GPIO 0 ON OFF controls.
What is the wireless range for remote control?
The maximum transmission distance is 400 meters in open environment.
Reviews
Forum
Welcome to the discussion thread for Módulo de relé WiFi ESP01S
Feel free to ask questions, share tips or report issues.
Add Post

For more discussion Click Here

Productos similares
Pedido al por mayor

Complete el siguiente formulario y nuestro equipo se pondrá en contacto con usted para ofrecerle precios por volumen.

¿Requisitos personalizados?

Reúnete con nuestro equipo

Widget de programación