Capacitor marking-code decoder

Choose the marking profile named in the component's datasheet, then enter the marking exactly as printed. A numeric code alone does not prove which convention a capacitor uses.

Keep uppercase suffix letters and the letter case of unit symbols. M and m mean different units.

Nominal capacitance

Enter a capacitor marking and choose its profile.

Decoded syntax does not confirm that this part or rating combination exists. This tool does not establish polarity or a safe discharge state.

Marking to value

Each marking part is shown with its role in the selected profile. The arrow leads to the nominal capacitance.

C_pF = AB × 10^D for digits ABD in the selected convention

Show the steps
Marking partRoleMeaning

Enable JavaScript to decode a marking. Formulas and examples remain available below.

Read supported capacitor digit codes, explicit capacitance units and selected manufacturer tolerance or voltage markings.

How to use

Choose the marking profile from the component's datasheet. Use Value with unit when the capacitance has an explicit unit.

Enter the marking exactly. Preserve uppercase suffix letters and the case of unit symbols.

Read the nominal capacitance and the selected interpretation. Check decoded tolerance or voltage against the same profile.

Open Show the steps to inspect the digits, multiplier, unit and supported suffix.

Copy result includes the profile and unknown fields. Reset clears the marking and restores the starting settings.

Science

In the supported pF digit convention, the first two digits form the significant value. The last digit sets its power-of-ten multiplier.

A code of 104 gives 10 × 10⁴ pF under that convention. That equals 100 nF or 0.1 µF.

A suffix has meaning only within a documented scheme. The same letter can describe different properties or values in different series.

This tool decodes J/K/M tolerance only in its Vishay K...G profile. It decodes voltage letters only in its AVX J-CAP profile.

Missing information remains unknown. An absent voltage field does not establish a safe working voltage.

Decoded capacitance is nominal. Actual capacitance can depend on the component specification and measurement conditions.

Confirm the full component identity and datasheet before choosing a replacement. This tool does not establish polarity or a safe discharge state.

Formulas

pF digit code: C_pF = AB × 10^D for digits ABD in the selected convention.

SI conversion: C_F = C_pF × 1e-12 = C_nF × 1e-9 = C_µF × 1e-6.

Encoded tolerance: C_min = C × (1 - t/100), C_max = C × (1 + t/100).

Voltage code: V = selected profile lookup(letter). This is a lookup, not a universal letter rule.

Examples

104, Three-digit pF code: 100 nF = 0.1 µF. 10 × 10⁴ pF under the selected convention.

472, Three-digit pF code: 4.7 nF. 47 × 10² pF.

0.1 µF, Value with unit: 100 nF. The explicit microfarad unit fixes the interpretation.

104K, Vishay K...G: 100 nF ±10%, 90 to 110 nF. K is tolerance in this named profile. Voltage remains unknown.

107V, KYOCERA AVX J-CAP: 100 µF, voltage code 35 V. This voltage meaning applies to the selected profile.

References

Vishay K...G Series, document 45250, revision 24-Apr-2025

KYOCERA AVX J-CAP Series, TDS-PTNO-0018, Rev 16

KYOCERA AVX TAP Series, TDS-PTNO-0026, Rev 2

BIPM SI prefixes