الأكثر مبيعاً

ThinkRobotics

وحدة شحن وتفريغ بطارية بجهد 5 فولت وتيار 2 أمبير مع منفذ USB من النوع C

SKU: ELC5060

₹ 119.99 ₹ 199.99

غير متوفر

📦 Min order 1

Enter your email or your WhatsApp number.

تحدث معنا عبر واتساب نحن نرد بسرعة! اتصل بنا
وحدة شحن وتفريغ بطارية بجهد 5 فولت وتيار 2 أمبير مع منفذ USB من النوع C₹ 119.99
Ask AI about this product

المواصفات:

  • نطاق جهد الإدخال: 5 ~ 5.5 فولت
  • جهد قطع الشحن: (4.2 فولت / 4.35 فولت) ± 0.5%
  • تيار الشحن: 2.4 أمبير ± 5%
  • جهد خرج التعزيز (Boost): 5 فولت ~ 5.15 فولت (تعويض فقدان الخط)
  • تموج جهد خرج التعزيز: 100 مللي فولت
  • تيار خرج التعزيز: 2 أمبير
  • كفاءة تحويل التعزيز: 92.5% (إدخال 3.6 فولت، خرج 5 فولت 2 أمبير)
  • التيار الساكن عند طرف البطارية: < 30 ميكرو أمبير

الوظيفة:

  • عندما يكون تيار الحمل أقل من 50 مللي أمبير بشكل مستمر، سيتم إيقاف تشغيل الخرج.
  • يدعم مفتاحاً خارجياً يتم توصيله بالنقطة K والقطب السالب للخرج. ضغطة قصيرة لتشغيل مؤشر الطاقة وتشغيل خرج 5 فولت. ضغطتان قصيرتان متتاليتان ستؤديان إلى إيقاف تشغيل مؤشر الطاقة وإيقاف خرج 5 فولت.
  • عندما ينخفض تيار الشحن إلى 100 مللي أمبير بعد الوصول إلى جهد الشحن العائم النهائي، سيتم إنهاء دورة الشحن تلقائياً.
  • عندما ينخفض جهد البطارية إلى أقل من 4.1 فولت، تبدأ دورة الشحن مرة أخرى.
  • عندما يكون جهد البطارية أقل من 2.8 فولت، سيتم شحن البطارية مسبقاً بتيار قدره 180 مللي أمبير.
  • يتم توفير موضع لحام قاعدة USB-A في الجزء الخلفي من المنتج، والذي يمكن تركيبه يدوياً.
  • يدعم التفريغ أثناء الشحن.
تتضمن العبوة:
  • 1x محول تعزيز (Boost Converter) بمنفذ Type-C USB بجهد 5 فولت وتيار 2 أمبير
What are the input and charging specifications for this module?
It accepts 5 to 5.5 V input, charging cut off at 4.2 V or 4.35 V with plus minus 0.5 percent, charging current up to 2.4 A plus minus 5 percent, and boost output of 5 to 5.15 V with 2 A max current.
Can the device discharge the battery while it is charging?
Yes, it supports discharging while charging.
How do I operate the external key to control power and display?
The external key is connected to the K point and output negative. A short press turns on the power display and 5 V output, and two consecutive short presses turn off the display and output.
What happens when the load current is very low?
If the load current is less than 50 mA continuously, the output will be turned off.
How does the charging cycle behave and what protections are included?
If the battery voltage drops below 4.1 V, charging starts again. If the voltage falls below 2.8 V the battery is pre charged at 180 mA. When charging current drops to 100 mA after reaching the final float voltage, the cycle terminates.
Welcome to the discussion thread for وحدة شحن وتفريغ بطارية بجهد 5 فولت وتيار 2 أمبير مع منفذ USB من النوع C
Feel free to ask questions, share tips or report issues.
Add Post

For more discussion Click Here

يرجى تعبئة النموذج أدناه وسيتواصل معك فريقنا لتزويدك بأسعار الجملة.

الوصف
Ask AI about this product

المواصفات:

  • نطاق جهد الإدخال: 5 ~ 5.5 فولت
  • جهد قطع الشحن: (4.2 فولت / 4.35 فولت) ± 0.5%
  • تيار الشحن: 2.4 أمبير ± 5%
  • جهد خرج التعزيز (Boost): 5 فولت ~ 5.15 فولت (تعويض فقدان الخط)
  • تموج جهد خرج التعزيز: 100 مللي فولت
  • تيار خرج التعزيز: 2 أمبير
  • كفاءة تحويل التعزيز: 92.5% (إدخال 3.6 فولت، خرج 5 فولت 2 أمبير)
  • التيار الساكن عند طرف البطارية: < 30 ميكرو أمبير

الوظيفة:

  • عندما يكون تيار الحمل أقل من 50 مللي أمبير بشكل مستمر، سيتم إيقاف تشغيل الخرج.
  • يدعم مفتاحاً خارجياً يتم توصيله بالنقطة K والقطب السالب للخرج. ضغطة قصيرة لتشغيل مؤشر الطاقة وتشغيل خرج 5 فولت. ضغطتان قصيرتان متتاليتان ستؤديان إلى إيقاف تشغيل مؤشر الطاقة وإيقاف خرج 5 فولت.
  • عندما ينخفض تيار الشحن إلى 100 مللي أمبير بعد الوصول إلى جهد الشحن العائم النهائي، سيتم إنهاء دورة الشحن تلقائياً.
  • عندما ينخفض جهد البطارية إلى أقل من 4.1 فولت، تبدأ دورة الشحن مرة أخرى.
  • عندما يكون جهد البطارية أقل من 2.8 فولت، سيتم شحن البطارية مسبقاً بتيار قدره 180 مللي أمبير.
  • يتم توفير موضع لحام قاعدة USB-A في الجزء الخلفي من المنتج، والذي يمكن تركيبه يدوياً.
  • يدعم التفريغ أثناء الشحن.
تتضمن العبوة:
  • 1x محول تعزيز (Boost Converter) بمنفذ Type-C USB بجهد 5 فولت وتيار 2 أمبير
الأسئلة الشائعة
What are the input and charging specifications for this module?
It accepts 5 to 5.5 V input, charging cut off at 4.2 V or 4.35 V with plus minus 0.5 percent, charging current up to 2.4 A plus minus 5 percent, and boost output of 5 to 5.15 V with 2 A max current.
Can the device discharge the battery while it is charging?
Yes, it supports discharging while charging.
How do I operate the external key to control power and display?
The external key is connected to the K point and output negative. A short press turns on the power display and 5 V output, and two consecutive short presses turn off the display and output.
What happens when the load current is very low?
If the load current is less than 50 mA continuously, the output will be turned off.
How does the charging cycle behave and what protections are included?
If the battery voltage drops below 4.1 V, charging starts again. If the voltage falls below 2.8 V the battery is pre charged at 180 mA. When charging current drops to 100 mA after reaching the final float voltage, the cycle terminates.
Reviews
Forum
Welcome to the discussion thread for وحدة شحن وتفريغ بطارية بجهد 5 فولت وتيار 2 أمبير مع منفذ USB من النوع C
Feel free to ask questions, share tips or report issues.
Add Post

For more discussion Click Here

منتجات مشابهة
طلب بالجملة

يرجى تعبئة النموذج أدناه وسيتواصل معك فريقنا لتزويدك بأسعار الجملة.

متطلبات مخصصة؟

قابل فريقنا

أداة جدولة المواعيد