الأكثر مبيعاً

Waveshare

شاشة Waveshare شفافة مقاس 1.51 بوصة بدقة 128×64، تدعم واجهات SPI أو I2C

SKU: WVSH0031

₹ 2,349.99 ₹ 2,499.99

متوفر خلال أسبوعين إلى 4 أسابيع

📦 Min order 1

Enter your email or your WhatsApp number.

تحدث معنا عبر واتساب نحن نرد بسرعة! اتصل بنا
شاشة Waveshare شفافة مقاس 1.51 بوصة بدقة 128×64، تدعم واجهات SPI أو I2C₹ 2,349.99
Ask AI about this product

شاشة OLED شفافة مقاس 1.51 بوصة، دقة 128×64، واجهات SPI/I2C، لون عرض أزرق فاتح

شريحة تعريف مستقلة مدمجة، تدعم واجهات SPI/I2C

تأتي مع أمثلة لـ Raspberry Pi، وArduino، وSTM32، إلخ.


 المميزات:

  • وحدة OLED شفافة، زاوية رؤية كاملة
  • تعتمد واجهة SPI رباعية الأسلاك وI2C، توافق أفضل، ومعدل بيانات سريع
  • تأتي مع موارد تطوير (أمثلة لـ Raspberry Pi/Arduino/STM32)

المواصفات:

  • جهد التشغيل: 3.3 فولت / 5 فولت
  • تباعد البكسلات: 0.274 × 0.274 مم
  • الواجهة: SPI رباعية الأسلاك / I2C
  • لوحة العرض: OLED
  • شريحة التعريف: شريحة تعريف مدمجة
  • الدقة: 128 × 64 بكسل
  • أبعاد الوحدة: 42.04 × 27.22 مم
  • حجم الشاشة: 35.05 × 15.32 مم
  • حجم البكسل: 0.254 × 0.254 مم
  • حجم لوحة التعريف: 41 × 22.5 مم


تبديل واجهة التحكم SPI وI2C

تدعم لوحات التحكم مثل Raspberry Pi/Arduino/STM32

  • VCC - مدخل طاقة 3.3 فولت / 5 فولت
  • GND - الأرضي
  • DIN - مدخل البيانات / طرف SPI MOSI
  • CLK - الساعة / طرف SPI SCK
  • CS - اختيار شريحة SPI، نشط عند المستوى المنخفض
  • DC - اختيار البيانات/الأوامر (مرتفع للبيانات، منخفض للأوامر)
  • RST - إعادة تعيين خارجية، نشطة عند المستوى المنخفض



الأبعاد الخارجية

ويكي (Wiki): www.waveshare.com/wiki/1.51inch_Transparent_OLED

What interfaces does this OLED module support and how do I choose between them?
It supports both 4 wire SPI and I2C interfaces and you can use the appropriate wiring and library examples for your board to select the interface.
What is the display size and resolution of the module?
The display is 1.51 inches diagonally with a 128 by 64 pixel resolution.
What voltage is required to power the module?
The module supports 3.3V or 5V supply and has a VCC input for either voltage.
Which development environments are supported and where can I find examples?
Development resources include examples for Raspberry Pi, Arduino and STM32 to help you get started.
Where can I find documentation and technical details for this product?
Documentation and setup guidance are available on the Waveshare wiki at www.waveshare.com/wiki/1.51inch_Transparent_OLED.
Add Post

For more discussion Click Here

يرجى تعبئة النموذج أدناه وسيتواصل معك فريقنا لتزويدك بأسعار الجملة.

الوصف
Ask AI about this product

شاشة OLED شفافة مقاس 1.51 بوصة، دقة 128×64، واجهات SPI/I2C، لون عرض أزرق فاتح

شريحة تعريف مستقلة مدمجة، تدعم واجهات SPI/I2C

تأتي مع أمثلة لـ Raspberry Pi، وArduino، وSTM32، إلخ.


 المميزات:

  • وحدة OLED شفافة، زاوية رؤية كاملة
  • تعتمد واجهة SPI رباعية الأسلاك وI2C، توافق أفضل، ومعدل بيانات سريع
  • تأتي مع موارد تطوير (أمثلة لـ Raspberry Pi/Arduino/STM32)

المواصفات:

  • جهد التشغيل: 3.3 فولت / 5 فولت
  • تباعد البكسلات: 0.274 × 0.274 مم
  • الواجهة: SPI رباعية الأسلاك / I2C
  • لوحة العرض: OLED
  • شريحة التعريف: شريحة تعريف مدمجة
  • الدقة: 128 × 64 بكسل
  • أبعاد الوحدة: 42.04 × 27.22 مم
  • حجم الشاشة: 35.05 × 15.32 مم
  • حجم البكسل: 0.254 × 0.254 مم
  • حجم لوحة التعريف: 41 × 22.5 مم


تبديل واجهة التحكم SPI وI2C

تدعم لوحات التحكم مثل Raspberry Pi/Arduino/STM32

  • VCC - مدخل طاقة 3.3 فولت / 5 فولت
  • GND - الأرضي
  • DIN - مدخل البيانات / طرف SPI MOSI
  • CLK - الساعة / طرف SPI SCK
  • CS - اختيار شريحة SPI، نشط عند المستوى المنخفض
  • DC - اختيار البيانات/الأوامر (مرتفع للبيانات، منخفض للأوامر)
  • RST - إعادة تعيين خارجية، نشطة عند المستوى المنخفض



الأبعاد الخارجية

ويكي (Wiki): www.waveshare.com/wiki/1.51inch_Transparent_OLED

الأسئلة الشائعة
What interfaces does this OLED module support and how do I choose between them?
It supports both 4 wire SPI and I2C interfaces and you can use the appropriate wiring and library examples for your board to select the interface.
What is the display size and resolution of the module?
The display is 1.51 inches diagonally with a 128 by 64 pixel resolution.
What voltage is required to power the module?
The module supports 3.3V or 5V supply and has a VCC input for either voltage.
Which development environments are supported and where can I find examples?
Development resources include examples for Raspberry Pi, Arduino and STM32 to help you get started.
Where can I find documentation and technical details for this product?
Documentation and setup guidance are available on the Waveshare wiki at www.waveshare.com/wiki/1.51inch_Transparent_OLED.
Reviews
Forum
Add Post

For more discussion Click Here

منتجات مشابهة
طلب بالجملة

يرجى تعبئة النموذج أدناه وسيتواصل معك فريقنا لتزويدك بأسعار الجملة.

متطلبات مخصصة؟

قابل فريقنا

أداة جدولة المواعيد