Más vendido

ThinkRobotics

Módulo de mini cargador solar de iones de litio CN3065 para 18650

SKU: ELC5025

₹ 199.99 ₹ 320.00

En stock | Listo para enviar

Módulo de mini cargador solar de iones de litio CN3065 para 18650₹ 199.99
Ask AI about this product
Este es un cargador solar Lipo súper mini basado en el CN3065, un chip de gestión de carga para una sola batería de litio.Este cargador solar le brinda la capacidad de obtener la mayor potencia posible de su panel solar u otro dispositivo fotovoltaico y cargar una batería LiPo recargable. La configuración también es sencilla: solo conecte su panel solar a un lado del cargador solar y su batería al otro, ¡y estará listo para comenzar a cargar!
 
La salida del cargador solar está diseñada para cargar una sola celda de polímero de iones de litio. La carga debe conectarse en paralelo con la batería. Por defecto, el cargador solar viene configurado con una corriente de carga máxima de 500 mA con una entrada máxima recomendada de 6V (mínimo 4.4V). Se recomienda no cargar las baterías a una corriente superior a su capacidad nominal.
 
Características:
  • Entrada del panel solar: 4.4-6V
  • Corriente de carga máxima: 500mA
  • Interfaz: conectores JST de 2 pines (o PH2.0)
  • Protección contra cortocircuitos
  • Corriente de carga continua de hasta 500mA
  • Indicación de estado de la batería ( Rojo: Cargando , Verde: Cargado )
  • Soporta carga USB (conector Micro-USB)
Especificaciones

Recursos

Hoja de datos

Tutorial
How does this charger work with a solar panel and a LiPo battery?
It charges a single Li-ion cell from a solar input of 4.4 to 6V with up to 500 mA. Connect the solar panel to the input side, the battery to the output side, and keep the load in parallel with the battery.
What input voltage and current does it support?
The solar input range is 4.4 to 6V and the maximum charge current is up to 500 mA. Use a 6V input if possible and avoid voltages outside the 4.4 to 6V range.
What battery types and capacity should I use with this?
This module is intended to charge a single polymer lithium ion cell. Do not charge beyond the battery capacity rating and connect the load in parallel with the battery.
Can I charge via USB and what connectors are used?
Yes, USB charging is supported via a Micro USB connector. The solar panel and battery connections use 2 pin JST or PH2.0 connectors.
How do I know when charging is in progress or finished?
The unit provides a battery status indicator where red means charging and green means charged.
Welcome to the discussion thread for Módulo de mini cargador solar de iones de litio CN3065 para 18650
Feel free to ask questions, share tips or report issues.
Add Post

For more discussion Click Here

Complete el siguiente formulario y nuestro equipo se pondrá en contacto con usted para ofrecerle precios por volumen.

Descripción
Ask AI about this product
Este es un cargador solar Lipo súper mini basado en el CN3065, un chip de gestión de carga para una sola batería de litio.Este cargador solar le brinda la capacidad de obtener la mayor potencia posible de su panel solar u otro dispositivo fotovoltaico y cargar una batería LiPo recargable. La configuración también es sencilla: solo conecte su panel solar a un lado del cargador solar y su batería al otro, ¡y estará listo para comenzar a cargar!
 
La salida del cargador solar está diseñada para cargar una sola celda de polímero de iones de litio. La carga debe conectarse en paralelo con la batería. Por defecto, el cargador solar viene configurado con una corriente de carga máxima de 500 mA con una entrada máxima recomendada de 6V (mínimo 4.4V). Se recomienda no cargar las baterías a una corriente superior a su capacidad nominal.
 
Características:
  • Entrada del panel solar: 4.4-6V
  • Corriente de carga máxima: 500mA
  • Interfaz: conectores JST de 2 pines (o PH2.0)
  • Protección contra cortocircuitos
  • Corriente de carga continua de hasta 500mA
  • Indicación de estado de la batería ( Rojo: Cargando , Verde: Cargado )
  • Soporta carga USB (conector Micro-USB)
Especificaciones

Recursos

Hoja de datos

Tutorial
Preguntas frecuentes
How does this charger work with a solar panel and a LiPo battery?
It charges a single Li-ion cell from a solar input of 4.4 to 6V with up to 500 mA. Connect the solar panel to the input side, the battery to the output side, and keep the load in parallel with the battery.
What input voltage and current does it support?
The solar input range is 4.4 to 6V and the maximum charge current is up to 500 mA. Use a 6V input if possible and avoid voltages outside the 4.4 to 6V range.
What battery types and capacity should I use with this?
This module is intended to charge a single polymer lithium ion cell. Do not charge beyond the battery capacity rating and connect the load in parallel with the battery.
Can I charge via USB and what connectors are used?
Yes, USB charging is supported via a Micro USB connector. The solar panel and battery connections use 2 pin JST or PH2.0 connectors.
How do I know when charging is in progress or finished?
The unit provides a battery status indicator where red means charging and green means charged.
Reviews
Forum
Welcome to the discussion thread for Módulo de mini cargador solar de iones de litio CN3065 para 18650
Feel free to ask questions, share tips or report issues.
Add Post

For more discussion Click Here

Productos similares
Pedido al por mayor

Complete el siguiente formulario y nuestro equipo se pondrá en contacto con usted para ofrecerle precios por volumen.

¿Requisitos personalizados?

Reúnete con nuestro equipo

Widget de programación