Low Stock! Buy Now!!!

ThinkRobotics

Módulo de pantalla OLED de 1.3" - 128X64

SKU: ELC2065-1

₹ 539.99 ₹ 599.99

En stock | Listo para enviar

Seleccionar variante

I2C Blue (4 Pin)
Style
Módulo de pantalla OLED de 1.3" - 128X64I2C Blue (4 Pin)₹ 539.99
Ask AI about this product
  • Resolución: 128 píxeles x 64 píxeles
  • Ángulo de visión súper amplio: más de 160°
  • Consumo de energía ultrabajo: 0.08W en pantalla normal (muy por debajo de las pantallas TFT)
  • Amplio rango de alimentación: DC 3V-5V (directamente compatible con sistemas de alimentación comunes de 3.3V y 5V sin cambios)
  • Grado industrial: Rango de temperatura de funcionamiento de -30 °C a 70 °C
  • Dimensiones: (largo) 35.4MM * (ancho) 33.5MM * (grosor) 4.3MM
  • Soporte para múltiples modos de funcionamiento: SPI de 3 cables, SPI de 4 cables, IIC
  • Con señal de selección de chip CS, puede lograr que varios dispositivos SPI o IIC funcionen en el mismo bus
  • Compatible con niveles de E/S de chips de control de 3.3V y 5V
  • Pantalla OLED, chip controlador interno: SH1106 (operación idéntica a SSD1306)

Distribución de pines:

  • OLED I2C de 1.3"
    • Pin 1 - GND 
    • Pin 2 - VCC
    • Pin 3 - SCL
    • Pin 4 - SDA
  • OLED SPI de 1.3"
    • Pin 1 - GND
    • Pin 2 - VCC
    • Pin 3 - CLK / SCL
    • Pin 4 - MOSI / SDA
    • Pin 5 - Reset (Señal de control de reinicio para el módulo de pantalla OLED)
    • Pin 6 - DC (Señal de control de selección de comando/datos del OLED)
    • Pin 7 - CS (Señal de control de selección de chip del OLED)

What interfaces does this display module support?
The module supports 3 wire SPI, 4 wire SPI, and I2C interfaces, and uses a CS signal to allow multiple devices on the same bus.
What voltages can power the display and how much current does it use?
It operates from DC 3V to 5V and is directly compatible with 3.3V and 5V power systems; normal display power consumption is about 0.08 W.
How do I wire the display in I2C and SPI modes?
In I2C mode the pins are Pin 1 GND, Pin 2 VCC, Pin 3 SCL, Pin 4 SDA. In SPI mode the pins are Pin 1 GND, Pin 2 VCC, Pin 3 CLK, Pin 4 MOSI, Pin 5 Reset, Pin 6 DC, Pin 7 CS.
What are the environmental and physical characteristics?
The module is industrial grade with an operating temperature range of -30 to 70 degrees Celsius, and its dimensions are 35.4 mm by 33.5 mm by 4.3 mm.
Is the SH1106 driver compatible with common controllers and what logic levels does it support?
The display uses an SH1106 internal drive chip, is compatible with SSD1306 style operation, and supports 3.3V and 5V logic level control chips.
Welcome to the discussion thread for Módulo de pantalla OLED de 1.3" - 128X64
Feel free to ask questions, share tips or report issues.
Add Post

For more discussion Click Here

Complete el siguiente formulario y nuestro equipo se pondrá en contacto con usted para ofrecerle precios por volumen.

Descripción
Ask AI about this product
  • Resolución: 128 píxeles x 64 píxeles
  • Ángulo de visión súper amplio: más de 160°
  • Consumo de energía ultrabajo: 0.08W en pantalla normal (muy por debajo de las pantallas TFT)
  • Amplio rango de alimentación: DC 3V-5V (directamente compatible con sistemas de alimentación comunes de 3.3V y 5V sin cambios)
  • Grado industrial: Rango de temperatura de funcionamiento de -30 °C a 70 °C
  • Dimensiones: (largo) 35.4MM * (ancho) 33.5MM * (grosor) 4.3MM
  • Soporte para múltiples modos de funcionamiento: SPI de 3 cables, SPI de 4 cables, IIC
  • Con señal de selección de chip CS, puede lograr que varios dispositivos SPI o IIC funcionen en el mismo bus
  • Compatible con niveles de E/S de chips de control de 3.3V y 5V
  • Pantalla OLED, chip controlador interno: SH1106 (operación idéntica a SSD1306)

Distribución de pines:

  • OLED I2C de 1.3"
    • Pin 1 - GND 
    • Pin 2 - VCC
    • Pin 3 - SCL
    • Pin 4 - SDA
  • OLED SPI de 1.3"
    • Pin 1 - GND
    • Pin 2 - VCC
    • Pin 3 - CLK / SCL
    • Pin 4 - MOSI / SDA
    • Pin 5 - Reset (Señal de control de reinicio para el módulo de pantalla OLED)
    • Pin 6 - DC (Señal de control de selección de comando/datos del OLED)
    • Pin 7 - CS (Señal de control de selección de chip del OLED)

Preguntas frecuentes
What interfaces does this display module support?
The module supports 3 wire SPI, 4 wire SPI, and I2C interfaces, and uses a CS signal to allow multiple devices on the same bus.
What voltages can power the display and how much current does it use?
It operates from DC 3V to 5V and is directly compatible with 3.3V and 5V power systems; normal display power consumption is about 0.08 W.
How do I wire the display in I2C and SPI modes?
In I2C mode the pins are Pin 1 GND, Pin 2 VCC, Pin 3 SCL, Pin 4 SDA. In SPI mode the pins are Pin 1 GND, Pin 2 VCC, Pin 3 CLK, Pin 4 MOSI, Pin 5 Reset, Pin 6 DC, Pin 7 CS.
What are the environmental and physical characteristics?
The module is industrial grade with an operating temperature range of -30 to 70 degrees Celsius, and its dimensions are 35.4 mm by 33.5 mm by 4.3 mm.
Is the SH1106 driver compatible with common controllers and what logic levels does it support?
The display uses an SH1106 internal drive chip, is compatible with SSD1306 style operation, and supports 3.3V and 5V logic level control chips.
Reviews
Forum
Welcome to the discussion thread for Módulo de pantalla OLED de 1.3" - 128X64
Feel free to ask questions, share tips or report issues.
Add Post

For more discussion Click Here

Productos similares
Pedido al por mayor

Complete el siguiente formulario y nuestro equipo se pondrá en contacto con usted para ofrecerle precios por volumen.

¿Requisitos personalizados?

Reúnete con nuestro equipo

Widget de programación