Electrical Energy Calculator
Calculate electricity use from power and duration, or constant DC voltage and current. Compare energy use over different operating times in watt-hours, kilowatt-hours and joules.
Open toolEnter one positive quantity. Wavelength depends on propagation speed; choose Light in vacuum or enter a custom phase speed.
Enable JavaScript to calculate. Guidance, formulas, examples and references remain available below.
Convert frequency, period, angular frequency and wavelength using light speed in vacuum or a phase speed you specify.
Choose the quantity you know, enter a positive value and select its unit. Choose the main result quantity and unit.
Select Light in vacuum for electromagnetic waves in vacuum. For another medium or wave, select Custom phase speed and enter the speed in metres or kilometres per second.
Read the main answer and the related frequency, period, angular-frequency and wavelength values. The selected speed is part of the result.
Switch the static wave between Time and Distance views. Change the visible span or choose Fit two cycles; these controls change the view only. Probe phase selects a position within one cycle without changing the conversion.
Copy result includes the speed assumption. Swap quantities reverses the source and main result while preserving the wave and speed. Reset clears the input and restores the configured starting units, speed setting and view.
Frequency describes cycles per second. Period is the duration of one cycle, so a higher frequency has a shorter period. One cycle spans 2π radians of phase; angular frequency is therefore 2π times frequency, with units of radians per second.
Wavelength is the distance over which a periodic wave repeats. During one period the phase travels one wavelength, so wavelength equals phase speed divided by frequency. A change of medium can change the speed and wavelength; frequency alone does not determine wavelength without a speed assumption.
Light travels in vacuum at exactly 299,792,458 metres per second. The custom-speed option uses your supplied phase speed without estimating material, temperature, dispersion or measurement uncertainty. Phase speed should not be mistaken for group or information speed.
The picture is a normalized sinusoidal illustration, not a measurement of amplitude or a prediction of the waveform's physical shape. The probe changes visual phase position only. It does not alter frequency, angular frequency or propagation speed.
Every input quantity and speed must be greater than zero. A zero-frequency DC signal has no finite oscillation period in this model. Exact constants do not remove input uncertainty or floating-point rounding. Calculations use binary64 arithmetic and an approximation to π; displayed values use at most 12 significant digits. In the formulas, f is frequency (Hz), T is period (s), ω is angular frequency (rad/s), λ is wavelength (m), v is phase speed (m/s), and π is the circle constant.
Frequency and period: f = 1/T
Angular frequency: ω = 2πf
Wavelength: λ = v/f = vT
Frequency from wavelength: f = v/λ
1 kHz; light in vacuum: T=1 ms, ω≈6283.18530718 rad/s, λ=299792.458 m. One thousand cycles fit in each second; the very large wavelength follows from the stated vacuum speed.
2.4 GHz; light in vacuum: T≈0.416666666667 ns, λ≈0.124913524167 m. This is a vacuum wavelength, not an antenna length or a cable propagation estimate.
20 ms; light in vacuum: f=50 Hz, ω≈314.159265359 rad/s. Period and angular frequency are distinct ways of describing the repetition.
1 kHz; custom speed 343 m/s: λ=0.343 m. The entered speed is an illustrative assumption, not an automatic sound-speed calculation.
500 nm; light in vacuum: f=599.584916 THz. Frequency is obtained from the chosen speed divided by wavelength.
0 Hz: no finite periodic-wave solution. Enter a positive frequency; the tool does not replace zero with a small number.
BIPM SI Brochure, ninth edition, version 4.01 (June 2026)
Available now
Calculate electricity use from power and duration, or constant DC voltage and current. Compare energy use over different operating times in watt-hours, kilowatt-hours and joules.
Open tool →Available now
Add up to 20 resistors in series using Ω, kΩ or MΩ for circuit analysis and electricity calculations, with a diagram and running total.
Open tool →Available now
Convert absolute temperatures between Celsius, Fahrenheit and kelvin.
Open tool →Given the fact that this was my first purchase and I made it thinking I was buying genuine Yihua products, this has been a setback. I received a lesser known OEM brand called MYTO and while both the products seem to be similar from appearance, my real contention is the quality and quantity of the brass wool. On top of that not informing the customer about the unavailability of the Yihua product and instead sending a product from a different brand is also antagonising. Henceforth, I might just have to think twice before ordering from ThinkRobotics.
TOF MINIF Range Sensor - UART TOF Time-of-Flight Laser Range Sensor
We are disappointed with our recent order experience. We clearly communicated our requirement for 433 MHz antennas on WhatsApp, but the issue remains unresolved. We have been following up for more than 10 days and are still waiting for a proper refund resolution.
As a regular B2B customer, we expected better support. This experience has affected our trust in ThinkRobotics, and we may have to consider other suppliers for future purchases. We request a fair and prompt refund.
Anodised Aluminium Cup Head Washers (Pack of 10)