Displays - 0.1” to 3.5”

37 products

40% Off

from ₹ 469.99

~~₹ 788.00~~

Features: 320 x 240 Resolution Compatible with Raspberry Pi 2 / 3 / 4 all variants RGB 65K true to life colours TFT Screen with integrated 4-wire Resistive Touch Panel Easy 4 pin interface...

41% Off

from ₹ 289.99

~~₹ 495.00~~

0.96 inch white OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128x64 . The package includes display board,...

46% Off Sold Out

3.5 inch TFT LCD Touch Screen Display For Raspberry Pi

₹ 1,084.99

~~₹ 1,999.00~~

3.5 inch TFT LCD Touch Screen Display for Raspberry Pi 4, 3, Pi2 , Model B/B+ This small 3.5-inch touch screen module is designed especially for Raspberry Pi, using the latest Linux Core system. Th...

30% Off

Waveshare 240×240 1.28inch Round LCD Display Module

₹ 1,049.99

~~₹ 1,499.99~~

1.28" ROUND LCD DISPLAY MODULE Embedded GC9A01 Driver, Using SPI Bus Comes with examples for Raspberry Pi, Arduino, STM32, etc. Features: 240×240 resolution, 65K RGB colors, clear and colorfu...

15% Off

1.69inch LCD Display Module - 240×280 IPS 262K Colors

₹ 849.99

~~₹ 999.99~~

1.69inch LCD Display Module Embedded ST7789V2 Driver Chip, Using SPI Interface Comes with examples for Raspberry Pi, Arduino, STM32, etc. Size 1.69" Resolution 240×280 Display Colo...

10% Off Sold Out

₹ 539.99

~~₹ 599.99~~

Resolution: 128 pixels X 64 pixels Super wide viewing angle: more than 160 ° Ultra-low power consumption: normal display 0.08W (far below the TFT display) Wide supply range: DC 3V-5V (without any...

Sold Out

₹ 1,699.99

Features: Diagonal Screen Size: 2.42" Resolution: 128 X 64 Driver IC: SSD1309 Screen output color may be white, yellow or blue. SPI interface definition: Pin 1 - GND (power ground) Pin 2 - VCC (p...

₹ 219.99

~~₹ 0.00~~

One problem with using a typical LCD display is that you give up a lot of GPIO pins to talk to the LCD. Four pins are used to send data, two pins are used for write and clock signals, and another p...

18% Off Sold Out

₹ 1,219.99

~~₹ 1,495.00~~

This is the 3.5 inch touch screen for Arduino UNO and MEGA. It use 8-bit parallel bus, faster than serial SPI refresh , support 16-bit RGB 65K color display, display rich colors , easy to expand th...

35% Off

₹ 649.99

~~₹ 999.00~~

This is the 2.4 inch touch screen for Arduino UNO and MEGA. It use 8-bit parallel bus, faster than serial SPI refresh , support 16-bit RGB 65K color display, display rich colors , easy to expand th...

23% Off Sold Out

₹ 1,999.99

~~₹ 2,599.99~~

3.5inch standard display, support HDMI input, refresh rate above 60 FPS Physical resolution 480x320, configurable software resolution up to 1920x1080 Can be used as a raspberry Pi display with t...

36% Off

Waveshare 1.51 inch Transparent OLED 128×64 Resolution SPI or I2C Interfaces

₹ 1,599.99

~~₹ 2,499.99~~

1.51inch Transparent OLED, 128×64 Resolution, SPI/I2C Interfaces, Light Blue Color Display Embedded Independent Driver Chip, Using SPI/I2C Interfaces Comes with examples for Raspberry Pi, Arduin...

30% Off

Waveshare 240x240 1.3inch IPS HD LCD Display Module

₹ 629.99

~~₹ 899.99~~

1.3inch LCD Display Module, IPS Screen, 240x240 HD Resolution, SPI Interface This is a general LCD display Module, IPS screen, 1.3inch diagonal, 240x240 HD resolution, with embedded controller...

17% Off

₹ 999.99

~~₹ 1,199.99~~

This is a dot matrix 128x64 COG graphic type OLED module. The size of the active area is 1.54” diagonal with module dimension 42.04 x 27.22 mm. This 1.54 inches OLED module has built-in IC SPD0301...

₹ 1,799.99

~~₹ 1,699.99~~

1.28inch Touch LCD Display Module Embedded GC9A01 Driver And CST816S Capacitive Touch Control Chip - Using SPI And I2C Communication Respectively Comes with examples for Raspberry Pi, Raspberry...

33% Off

from ₹ 465.99

~~₹ 700.00~~

Interface definition: 1. GND (Power ground) 2. VCC (Power +3.3) 3. SCL (SPI clock line) 4. SDA (SPI data line) 5. RES (LCD reset, LCD needs to be reset once after power-on) 6. DC (SPI data/comm...

₹ 999.99

1.47inch LCD Display Module, Rounded Corners, 172×320 Resolution, SPI Interface Embedded ST7789V3 Driver, Using SPI Bus Size 1.47" Resolution 172×320 Display Color 262K RGB Interfa...

21% Off

E-Ink e-Paper Display For Arduino/Raspberry Pi

₹ 1,729.00

~~₹ 2,199.99~~

The electronic ink screen uses the "microcapsule electrophoresis display" technology for image display. Its working principle is that the charged nanoparticles suspended in the liquid undergo the a...

1.28 inch Round LCD With RP2040 MCU Board

₹ 1,459.99

1.28inch Round LCD, Accelerometer And Gyroscope SensorBased on Raspberry Pi RP2040 RP2040-LCD-1.28 is a low-cost, high-performance MCU board designed by Waveshare. Tiny size with onboard 1...

33% Off

from ₹ 235.00

~~₹ 349.00~~

This is LCD2004 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16X02 or 20×04 Green or Blue Liquid Crystal Display into your project. The display offers clear ...

33% Off Sold Out

₹ 599.99

~~₹ 899.99~~

Pin: GND: power supply VCC: DC 3.3-5V SCL: SPI Clock Cable SDA:SPI Data Cable RES: Reset DC: SPI Choice/ Command Choice BLK:Backlight control, default floating, low level off Description: The TF...

46% Off

₹ 589.99

~~₹ 1,099.99~~

1.14inch LCD Display Module, IPS Screen, 65K RGB Colors, 240×135 Resolution, SPI Interface Embedded ST7789 Driver, Using SPI Bus Features: 240×135 resolution, 65K RGB colors, clear and col...

27% Off

Makerbase MKS TFT32 3.2inch Controller Display

₹ 3,999.99

~~₹ 5,499.99~~

MKS TFT32 is an independent color touch product developed for maker base , which is suitable for open source 3D printers. It can be used in a series of motherboards such as MKS Base, MKS Gen...

38% Off Sold Out

₹ 1,249.99

~~₹ 1,999.99~~

Designed for small machines, 3D Printers and CNCs, it solves the problem of ordinary 12864 size installation on small machines! User-friendly design! The SD card slot is placed on the fron...

Displays - 0.1” to 3.5”

Shopping Cart

Let customers speak for us