To avoid all the loose wiring disasters in your project, use these terminal blocks whenever making PCB-to-Wire connections. These blocks are big enough for a range of wire gauges, easy to adjust wi...
In the world of electronics projects, we need headers, headers and more headers.
Each pack contains ten 40-pin break-away male headers, 0.1" (2.54mm) pitch. Breakaway headers are like the cello-ta...
USB Type C connectors are expected to be widely used as a next-generation interface. They support a variety of protocols such as USB2.0/3.0/3.1 and meet Superspeed communication 10Gb/s, 5A and 20V ...
These switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard as well. The pins are normally open (disconnected) and when t...
Third generation Power MOSFETs from Vishay provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness.
The TO-220AB packag...
These are our favorite trim pots, perfect for breadboarding and prototyping. They have a long grippy adjustment knob and with 0.1" spacing, they plug into breadboards or perfboards with ease.
This ...
Great item for small electronics projects and CCTV applications.
Connector Size - 5.5mm x 2.1mm - External Diameter x Internal Diameter.
Female Socket DC Adapter, solder termination with solder ...
Piezo buzzers are used for making beeps, tones and alerts. This one is petite but loud! Drive it with 3-5V peak-to-peak square wave. To use, connect one pin to ground (either one) and the other pin...
Open Top jumper socket or shunt - Black housin
High Force, Single Operation.
Alternative programming method to DIP switches
Current Rating: 1A
Operating Temperature: -40℃ to 85℃
Specifications
SK13D07 - VG3 High Performance PCB mount mini slide switches for DIY projects
Product Features:
Material: Iron and Nylon
Voltage: DC 50V
Current: 0.3A
Slider Size: 3mm
Great for electronic DIY
Con...
An electromechanical relay is basically designed using few mechanical parts like Electromagnet, a movable armature, contacts, yoke, and a spring/frame/stand, these parts. All these are arranged log...
USB type A solder type connectors have been manufactured with high quality materials to ensure that these products will provide optimized performance. The solder type feature of the connectors con...
The cadmium sulfide (CdS) or light dependent resistor (LDR) whose resistance is inversly dependent on the amount of light falling on it, is known by many names including the photo resistor, phot...
With over 200pcs components including basic transistors, IC components, precision potentiometer, lots of LEDs, resistors and other generic components.
Specifications:
Color: Multicolor
Material: ...
TSOP 1738 sensor is a miniaturized receiver for IR (infrared) remote control systems. TSOP IR sensor consists of a PIN diode and a preamplifier on the lead frame. The epoxy package contains an IR ...
Details:
Temperature range: -40 ~ 70 ° C
Rated load: 0.3A 60 V AC / 1.5A 25 V AC
Contact resistance: <= 0.02 Ω
Holding voltage: AC250V (50Hz) / min
Operating force: 100-350g
Insulation resistan...
L293D is a dual H-bridge motor driver integrated circuit (IC). Motor drivers act as current amplifiers since they take a low-current control signal and provide a higher-current signal. This higher ...
This gray scale sensor is able to measure the intensity of light from black to white. A gray scale is also known as black-and-white, are composed exclusively of shades of gray, varying from blac...
Specification •
Connectors Size: DC 5.5 x 2.5 x 9.5 mm female
2x solder connection
Operating voltage: 16 V DC
Current: max. 3 A
Plastic shell: PBT
Pin: copper nickel plated
Thread type: M8*P0.75
...
