Collection:
SEEED Studios | Official Page
25 products
Official products of SEEED Studios. Brought to you by ThinkRobotics.
36% Off
reComputer J202 - carrier Board for Jetson Nano and Xavier NX with 4 USB 3.1, M.2 Key
No reviews
Regular price
from ₹ 12,899.99
Sale price
from ₹ 12,899.99
Regular price
₹ 19,999.99
Unit price
/per
The reComputer J202 carrier board has nearly the same design and function as NVIDIA® Jetson Xavier NX™ carrier board, perfectly works with Jetson Nano/Xavier NX module, and consists of USB 3.2 gen...
33% Off
J101 Jetson Nano Carrier Board
The J101 carrier board is a cost-effective and interface-rich NVIDIA Jetson Nano compatible carrier board. It included HDMI2.0, 2x USB 2.0, 1x USB 3.0, micro SD card slot, 2 xCSI, M.2 key E WIFI / ...
20% Off
Sold Out
reSpeaker 2-Mics Pi HAT for Raspberry Pi
reSpeaker 2-Mics Pi HAT for Raspberry Pi
WM8960 Audio Codec, 2 Analog Microphones, 3 APA102 RGB LEDs, 3.5mm Audio Jack, User Button, attached with NLU software algorithms, VAD,DOA, KWS
The reSpeake...
36% Off
Mini PC with Raspberry Pi Compute Module 4 4GB RAM 32GB eMMC Dual Gigabit Ethernet
The Mini Router is equipped with dual Gigabit Ethernet ports and dual USB 3.0 ports, making it suitable for soft router applications, while keeping the hardware to a minimum. We have pre-installed ...
4% Off
reComputer J2012 / J2021 - Edge AI Device with Jetson Xavier NX module, Aluminium case, pre-installed JetPack System
1 review
Regular price
from ₹ 66,999.99
Sale price
from ₹ 66,999.99
Regular price
₹ 69,999.00
Unit price
/per
5.0 / 5.0
(1) 1 Translation missing: en.genaral.accessibility.total_reviews
reComputer series for Jetson are compact edge computers built with NVIDIA advanced AI embedded systems: J10 (Nano 4GB) and J20 (Jetson Xavier NX 8GB and Jetson Xavier 16GB).
With rich extension m...
18% Off
Sold Out
CANBed - Arduino Compatible CAN-BUS Development Kit
CANBed - Arduino CAN-BUS Development Kit embeds an ATmega32U4 chip, which means you don’t need to add other jump wires to another Arduino Board, it is an Arduino board itself plus MCP2515 CAN Bus c...
45% Off
Sold Out
CAN-BUS Shield V2 - high-performance MCP2515 controller & MCP2551 transceiver
CAN-BUS Shield V2 adopts MCP2515 and MCP2551 for controller and transceiver, it is compatible with Arduino which means it can switch an Arduino board like Arduino Uno to start your CAN-BUS project....
12% Off
ThinkRobotics Edge AI Device with NVIDIA Jetson Orin™ NX 8GB module
No reviews
Regular price
₹ 78,999.99
Sale price
₹ 78,999.99
Regular price
₹ 89,999.99
Unit price
/per
reComputer J4011 built with Jetson Orin NX 8GB is a powerful and compact intelligent edge box to bring up to 70TOPS modern AI performance to the edge, which offers more than 3.5X the performance...
35% Off
Wio Terminal: ATSAMD51 Core with Realtek RTL8720DN BLE 5.0 & Wi-Fi 2.4G/5G Dev Board
Wio Terminal is an ATSAMD51-based microcontroller with both Bluetooth and Wi-Fi Wireless connectivitypowered by Realtek RTL8720DN, compatible with Arduino and MicroPython. Currently, wireless conne...
17% Off
ThinkRobotics Edge AI Device with NVIDIA Jetson Orin™ Nano (J3010/J3011) - Made in India
No reviews
Regular price
from ₹ 49,999.99
Sale price
from ₹ 49,999.99
Regular price
₹ 59,999.99
Unit price
/per
ThinkRobotics Edge AI Device with NVIDIA Jetson Orin™ Nano (J3010 - 4GB /J3011 - 8GB)
This Edge AI deployment kit with Jetson Orin Nano is a powerful and compact intelligent edge box to brin...
22% Off
reComputer J401 Carrier Board for Jetson Orin NX and Nano
No reviews
Regular price
₹ 17,199.99
Sale price
₹ 17,199.99
Regular price
₹ 21,999.99
Unit price
/per
The J401 carrier board is a powerful extension board that supports NVIDIA Jetson Orin NX/Nano modules. It features 1xGbE port, 1x CAN for data transfer, M.2 Key M for SSD, M.2 Key E for WiFi/B...
17% Off
reTerminal CM4104032 - AI, IoT, IIoT Human Machine Interface
No reviews
Regular price
₹ 28,999.99
Sale price
₹ 28,999.99
Regular price
₹ 34,999.99
Unit price
/per
The reTerminal is a Human-Machine Interface facility, designed in modularization, offered multiple interfaces and components. It is your hand-size, powerful, Raspberry Pi-based all-in-one bo...
14% Off
reTerminal DM - 10.1'' Integrated Device Master
No reviews
Regular price
₹ 48,999.99
Sale price
₹ 48,999.99
Regular price
₹ 56,999.99
Unit price
/per
reTerminal DM - 10.1'' Integrated Device Master
Industrial HMI/PLC/Panel PC/Gateway in One, Raspberry Pi CM4 Core, NodeRed Integrated
A 10.1" open-source industrial HMI - an Integrated Device Mas...
10% Off
ThinkRobotics Edge AI Device with NVIDIA Jetson Orin™ NX 16GB module (J4012)
No reviews
Regular price
₹ 98,999.99
Sale price
₹ 98,999.99
Regular price
₹ 109,999.99
Unit price
/per
ThinkRobotics Edge AI Device with NVIDIA Jetson Orin™ NX 16GB module (J4012)
ThinkRobotics Edge AI Device is built with Jetson Orin NX 16GB - a powerful and compact intelligent edge box to bring...
17% Off
4WD Driver Platform V1.0
The 4WD Driver Platform V1.0 is a multi-purpose, all-in-one development platform based on Intel Edison. It is specially designed for robotics applications. Fully compatible with Arduino open...
46% Off
Sold Out
Wio-E5 mini (STM32WLE5JC) Dev Board
LoRa-E5 mini (STM32WLE5JC) Dev Board, LoRaWAN protocol and worldwide frequency supported
LoRa-E5 mini is a compacted-sized dev board suitable for the rapid testing and building of small-size LoRa d...
39% Off
Sold Out
Wio-E5 Dev Kit, for Long Range Application
LoRa-E5 Development Kit
based on LoRa-E5 STM32WLE5JC, LoRaWAN protocol and worldwide frequency supported
Wio-E5 Development Kit consists of a Wio-E5 Dev Board, an antenna (EU868/US915), a USB type ...
27% Off
Sold Out
Wio Terminal LoRaWAN Field Tester Kit
No reviews
Regular price
₹ 10,999.99
Sale price
₹ 10,999.99
Regular price
₹ 14,999.99
Unit price
/per
Wio Terminal LoRaWAN Field Tester Kit:
Plug and Play LongFi Network Monitor for Helium Network
Features
On-Size Verification: Monitor the LongFi network performance from the field to verify the ...
14% Off
SenseCAP K1100 - The Sensor Prototype Kit with LoRa® and AI
No reviews
Regular price
₹ 13,699.99
Sale price
₹ 13,699.99
Regular price
₹ 15,999.99
Unit price
/per
SenseCAP K1100 - The Sensor Prototype Kit with LoRa® and AI
In the digital age where IoT and big data are becoming more prevalent, massive data collection through sensors is required to facilitate ...
28% Off
Sold Out
re_computer case: Most Compatible Enclosure for popular SBCs including ODYSSEY - X86J4105, Raspberry Pi, BeagleBone and Jetson Nano/Xavier NX
The re_computer case is specially designed for the re_computer system, compatible with all popular SBCs, with a removable acrylic cover on the top, and with a stackable structure to extend endless...
11% Off
Sold Out
Quantum Tiny Linux Development Kit – With SoM and Expansion Board
Quantum Tiny Linux Development Kit – With SoM and Expansion Board
Quantum Tiny Linux Development Kit consists of a core board which is the SoM (System on Module) and an expansion board as the ca...
20% Off
EdgeBox RPi 200 - Industrial Edge Controller with WiFi
No reviews
Regular price
from ₹ 31,999.99
Sale price
from ₹ 31,999.99
Regular price
₹ 39,999.99
Unit price
/per
EdgeBox-RPi-200 series are all-in-one Raspberry Pi-based industrial edge computing controllers, combining multiple industrial purposes. Designed as high-scalability and rugged industrial hardware,...
27% Off
Sold Out
EdgeBox-ESP-100-Industrial Edge Controller
No reviews
Regular price
₹ 22,599.99
Sale price
₹ 22,599.99
Regular price
₹ 30,999.99
Unit price
/per
EdgeBox-ESP-100-Industrial Edge Controller, WiFi, BLE, 4G LTE, DIO, AIO, Ethernet, CAN, RS485
EdgeBox-ESP-100 represents the lightweight, multi-functional controller. It carries various wireless ca...
4% Off
A203 V2 Compact Carrier Board for Jetson Nano/Xavier NX/TX2 NX
No reviews
Regular price
from ₹ 19,299.99
Sale price
from ₹ 19,299.99
Regular price
₹ 19,999.99
Unit price
/per
A203 V2 Carrier Board for Jetson Nano/Xavier NX/TX2 NX with compact size and rich ports (Wifi, Bluetooth, SSD supported etc.)
Jetson A203 V2 is an upgraded version of Jetson-A203, which is still an...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device