Seeed Studio XIAO ESP32C3 adopts new RISC-V architecture, supporting bothĀ Wi-Fi and BLE wireless connectivities. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.
Seeed Studio XIAO Series are diminutive development boards, sharing a similar hardware structure, where the size is literally thumb-sized. The code name "XIAO" here represents its half feature "Tiny", and the other half will be "Puissant".
Seeed Studio XIAO ESP32C3 adopts new RISC-V architecture, supporting bothĀ Wi-Fi and BLE wireless connectivities. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.
Seeed Studio XIAO ESP32C3Ā has equipped a highly-integratedĀ ESP32-C3 chip, built around a 32-bit RISC-V chip processor with a four-stage pipeline that operates at up to 160 MHz.
The board equips highly-integrated ESP32-C3 SoC. The chip has been installed with aĀ complete 2.4GHz Wi-Fi subsystemĀ which means it supports Station mode, SoftAP mode, SoftAP & Station mode, and promiscuous mode for multiple Wi-Fi applications. It works under anĀ ultra-low power state, also supporting features ofĀ Bluetooth 5Ā andĀ Bluetooth mesh. There are 400 KB SRAM & 4 MB Flash on the chip, allowing for more programming space, and bringing more possibilities to the IoT control scenarios.
Being a number to the Seeed Studio XIAO family, the board deservedly maintains the classicĀ thumb-sized form-factor designĀ and elegantĀ productization of single-sided components mounting. Meanwhile, it has equipped with aĀ battery charge chipĀ and integrated circuit for enhancing its ability to carry. This board comes included with an external antenna to increase the signal strength for wireless applications. There are 11 digital I/O that can be used as PWM pins and 4 analog i/o that can be used as ADC pins. It supports UART, IIC, and SPI serial communication ports. Utilizing its small and exquisite hardware design and the powerful onboard chip, programming by Arduino, it will offer more ability to wearable and portable devices or other applications.
| Parameter | Description |
| Processor | ESP32-C3 SoC |
| RISC-V single-core 32-bit chip processor with a four-stage pipeline that operates at up to 160 MHz | |
| Wireless | Complete 2.4GHz Wi-Fi subsystem |
| Bluetooth 5.0/ Bluetooth mesh | |
| On-chip Memory | 400KB SRAM & 4MB Flash |
| Interface | 1x UART, 1x IIC, 1x SPI,11x GPIO(PWM), 4x ADC |
| 1x Reset button, 1x Boot button | |
| Dimensions | 21 x 17.5mm |
| Power | Circuit operating voltage: 3.3V@200mA |
| Charging current: 50mA/100mA | |
| Input voltage (VIN): 5V | |
| Deep Sleep Power Consumption | Deep Sleep Model: >44 Ī¼A |
| Wi-Fi Enabled Power Consumption | Active Model: <75 mA |
| Modem-sleep Model: <25 mA | |
| Light-sleep Model: <4 mA | |
| BLE Enabled Power Consumption | Modem-sleep Model: <27 mA |
| Light-sleep Model: <10 mA | |
| Working Temperature | -40Ā°C ~ 85Ā°C |
Ā
| Seeed Studio XIAO ESP32C3 | x1 |
|---|---|
| Antenna | x1 |
No reviews yet. Be the first to share your experience!
Fill out the form below and our team will get back to you with bulk pricing.
Seeed Studio XIAO ESP32C3 adopts new RISC-V architecture, supporting bothĀ Wi-Fi and BLE wireless connectivities. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.
Seeed Studio XIAO Series are diminutive development boards, sharing a similar hardware structure, where the size is literally thumb-sized. The code name "XIAO" here represents its half feature "Tiny", and the other half will be "Puissant".
Seeed Studio XIAO ESP32C3 adopts new RISC-V architecture, supporting bothĀ Wi-Fi and BLE wireless connectivities. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.
Seeed Studio XIAO ESP32C3Ā has equipped a highly-integratedĀ ESP32-C3 chip, built around a 32-bit RISC-V chip processor with a four-stage pipeline that operates at up to 160 MHz.
The board equips highly-integrated ESP32-C3 SoC. The chip has been installed with aĀ complete 2.4GHz Wi-Fi subsystemĀ which means it supports Station mode, SoftAP mode, SoftAP & Station mode, and promiscuous mode for multiple Wi-Fi applications. It works under anĀ ultra-low power state, also supporting features ofĀ Bluetooth 5Ā andĀ Bluetooth mesh. There are 400 KB SRAM & 4 MB Flash on the chip, allowing for more programming space, and bringing more possibilities to the IoT control scenarios.
Being a number to the Seeed Studio XIAO family, the board deservedly maintains the classicĀ thumb-sized form-factor designĀ and elegantĀ productization of single-sided components mounting. Meanwhile, it has equipped with aĀ battery charge chipĀ and integrated circuit for enhancing its ability to carry. This board comes included with an external antenna to increase the signal strength for wireless applications. There are 11 digital I/O that can be used as PWM pins and 4 analog i/o that can be used as ADC pins. It supports UART, IIC, and SPI serial communication ports. Utilizing its small and exquisite hardware design and the powerful onboard chip, programming by Arduino, it will offer more ability to wearable and portable devices or other applications.
| Parameter | Description |
| Processor | ESP32-C3 SoC |
| RISC-V single-core 32-bit chip processor with a four-stage pipeline that operates at up to 160 MHz | |
| Wireless | Complete 2.4GHz Wi-Fi subsystem |
| Bluetooth 5.0/ Bluetooth mesh | |
| On-chip Memory | 400KB SRAM & 4MB Flash |
| Interface | 1x UART, 1x IIC, 1x SPI,11x GPIO(PWM), 4x ADC |
| 1x Reset button, 1x Boot button | |
| Dimensions | 21 x 17.5mm |
| Power | Circuit operating voltage: 3.3V@200mA |
| Charging current: 50mA/100mA | |
| Input voltage (VIN): 5V | |
| Deep Sleep Power Consumption | Deep Sleep Model: >44 Ī¼A |
| Wi-Fi Enabled Power Consumption | Active Model: <75 mA |
| Modem-sleep Model: <25 mA | |
| Light-sleep Model: <4 mA | |
| BLE Enabled Power Consumption | Modem-sleep Model: <27 mA |
| Light-sleep Model: <10 mA | |
| Working Temperature | -40Ā°C ~ 85Ā°C |
Ā
| Seeed Studio XIAO ESP32C3 | x1 |
|---|---|
| Antenna | x1 |
No reviews yet. Be the first to share your experience!
Fill out the form below and our team will get back to you with bulk pricing.
Custom Requirements?
Related products
