Inductors in series/parallel calculator

Enter a decimal or scientific notation, such as 10 or 2.2e3. Changing a row unit reinterprets its number.

Equivalent inductance

Complete every inductance value to see the equivalent.

Schematic, not to scale. Ideal uncoupled inductors.

Scroll vertically to inspect the complete circuit.

Show the steps

Scroll horizontally to see all table columns.

ComponentValue (H)Formula termTerm share (%)

Interactive calculation is unavailable until JavaScript loads. The formulas, worked examples and references below remain available.

Combine up to 20 ideal uncoupled inductors in series or parallel and inspect equivalent inductance.

How to use

Choose Series or Parallel.

Enter each inductance and select its unit.

Use Add inductor or Remove to match the number of components.

Read the equivalent inductance. Change Result unit to see the same answer in another unit.

Use Highlight inductor, Circuit view or Show the steps to inspect the relationship.

Use Copy result for a labeled result. Reset clears the entries and restores the block defaults.

Science

An ideal inductor relates voltage to the rate of change of current.

Uncoupled inductors in series carry the same changing current, so their voltage contributions add.

Parallel inductors share voltage, giving the reciprocal rule for equivalent inductance. For two or more positive values, the parallel equivalent is smaller than the smallest component.

This calculator assumes no mutual magnetic coupling. Nearby coils or windings on a shared core can violate that assumption.

The model does not estimate saturation, winding resistance, current capacity or behavior near self-resonance. Check component data and layout before using a nominal combination.

Term shares describe the selected formula sum. A reciprocal term share is not a share of equivalent inductance.

Formulas

Series equivalent: L_eq = L1 + L2 + ... + Ln

Parallel equivalent: 1/L_eq = 1/L1 + 1/L2 + ... + 1/Ln

Variables: L_i is one inductance in H. L_eq is the equivalent inductance in H.

Examples

Series: 10 mH and 20 mH: 30 mH. Add the two uncoupled inductances.

Parallel: 10 mH and 20 mH: 6.666666667 mH. Invert 1/10 + 1/20 in reciprocal millihenries.

Parallel: 10 mH and 10 mH: 5 mH. Two equal uncoupled inductors in parallel halve the inductance.

Series: 100 µH and 0.22 mH: 0.32 mH. 100 µH equals 0.1 mH before addition.

One 470 µH inductor, either mode: 470 µH. A one-item network retains its inductance.

References

James M. Fiore, Laboratory Manual: DC Electrical Circuit Analysis, section 15.1

BIPM, SI prefixes

Coilcraft, Using Standard Transformers in Multiple Applications