Learn
-
PIR Person Detector
The right potentiometer controls sensitivity and the left potentiometer controls the timeout.
Here, we set both the sensitivity and timeout at their lowest (anti-clockwise). It is advised to keep the timeout as low as possible and just change the sensitivity depending on the range required.
-
LED Blink with Raspberry Pi
Components Required: Raspberry Pi 3 B+ SD Card Micro USB Cable with Adapter Monitor with HDMI cable Mouse and Keyboard Breadboard 2 Jumpers 330ohm resistor LED Software Required: Raspbian Operating... -
DIY with Raspberry Pi Camera Kit
Components Required: Raspberry Pi 3 B+ SD Card Micro USB Cable with Adapter Monitor with HDMI cable Mouse and Keyboard Raspberry Pi Camera Step 1: Connect Camera to Raspberry PI... -
Water Level Reading - project with Arduino UNO and Water Level Indicator
Wastage of water is a major problem in all major cities of the world. Does technology have a solution? Yes! Indeed a simple one. Learn how to automate the task of reading water level using a water level indicator and an Arduino UNO. -
Next Alexa could be made in your classroom
There is almost unanimous acknowledgement that modern education needs to focus more at creating more creators than followers, more innovators than mere users of technology. A child initiated into number of opportunities at school level is more likely to choose a field based on interest and abilities than any other factor. A university ready and eventually industry-ready pioneer can prove to be more beneficial to society. -
Automation- an industry imperative
The main stakeholders in value chain of robotics technology market are robot designers and suppliers of standard hardware components, suppliers of special engineered components, software providers, system integrators, and end users. Each of these players shares a specific value at their point of operation, which in turn contributes to the competitive value of the product. -
Detecting Obstacles and Warning - Arduino and Ultrasonic
This is a tutorial to help you understand ultrasonic and buzzer and go deeper into learning Arduino. -
Temperature Monitoring With DHT22 & Arduino
Simple Temperature Monitoring with DHT22 & Arduino. -
Health Kit: Humidity and Temperature Control
An Android app-controlled, Arduino-based kit that receives and analyzes humidity and temperature data. -
How to use the right motor for your DIY Project?
Try this! Take a length of ordinary wire, make it into a big loop, and lay it between the poles of a powerful, permanent horseshoe magnet. Now if you connect the two ends of the wire to a battery, the wire will jump up briefly.