This lithium ion battery with capacities of 500mAh and 700mAh. It is slim and easy to fit into many project cases. The batteries are unprotected and best work with out 16340 Battery Shield and 16340 Arduino Shield.
Like most lithium-ion packs, the batteries we sell do not have thermistors built in. This is why we suggest charging at 1/2C or even less - 0.5A max in this case. Of course, you can charge at a lower rate - it'll just take a little longer to fill up.
Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these batteries, do not short, bend, crush or puncture. Never charge or use unattended. Always inspect batteries and surrounding circuitry constantly for any damage, loose wiring, or possibility of short circuits. Polarity matches all Adafruit LiPoly/LiIon chargers and boards, other brands may have reverse polarity and can destroy your battery. As with all Lithium ion polymer batteries and with any power source - they should be used by experts who are comfortable working with power supplies.
NOTE: Batteries once sold are non-returnable and non-exchangeable.
Specifications
Storage Voltage: 3.85V - 3.95V
Nominal Capacity: 900 mAh @ 0.2C discharge; 720 mAh @ 0.5C discharge
Nominal Voltage: 3.7V
Discharge Cut-Off Voltage: 2.75V
Charge Voltage Limit: 4.2 ± 0.03V (0℃ - 45℃)
Standard Discharge Current: 375mA (0.5C @ 0℃ - 45 ℃)
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
Team is suppotive and solves all the queries .
The product is good and will surely help me in my project...looking forward for more trades with think robotics.
{"id":1419004837960,"title":"16340 Li-Ion Battery CR123A (1 piece) - BIS Certified","handle":"16340-battery-3-7v-1300mah","description":"\u003cp\u003eThis lithium ion battery with capacities of 500mAh and 700mAh. It is slim and easy to fit into many project cases. The batteries are unprotected and best work with out \u003ca title=\"16340 Battery Shield\" href=\"https:\/\/thinkrobotics.in\/products\/16340-single-battery-shield?_pos=1\u0026amp;_sid=56befef69\u0026amp;_ss=r\"\u003e16340 Battery Shield\u003c\/a\u003e and \u003ca title=\"Arduino Power Shield\" href=\"https:\/\/thinkrobotics.in\/products\/dual-16340-rechargeable-lithium-battery-charger-arduino-shield?_pos=3\u0026amp;_sid=6c21746e4\u0026amp;_ss=r\"\u003e16340 Arduino Shield\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLike most lithium-ion packs, the batteries we sell do not have thermistors built in. This is why we suggest charging at 1\/2C or even less - 0.5A max in this case. Of course, you can charge at a lower rate - it'll just take a little longer to fill up.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAdditional safety notes:\u003c\/strong\u003e\u003cspan\u003e Do not use a NiMH\/NiCad\/lead-acid charger! Also, do not abuse these batteries, do not short, bend, crush or puncture. \u003c\/span\u003e\u003cstrong\u003eNever charge or use unattended. Always inspect batteries and surrounding circuitry constantly for any damage, loose wiring, or possibility of short circuits.\u003c\/strong\u003e\u003cspan\u003e Polarity matches all Adafruit LiPoly\/LiIon chargers and boards, other brands may have reverse polarity and can destroy your battery. As with all Lithium ion polymer batteries and with any power source - they should be used by experts who are comfortable working with power supplies.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNOTE: Batteries once sold are non-returnable and non-exchangeable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eStorage Voltage: 3.85V - 3.95V\u003c\/li\u003e\n\u003cli\u003eNominal Capacity: 900 mAh @ 0.2C discharge; 720 mAh @ 0.5C discharge\u003c\/li\u003e\n\u003cli\u003eNominal Voltage: 3.7V\u003c\/li\u003e\n\u003cli\u003eDischarge Cut-Off Voltage: 2.75V\u003c\/li\u003e\n\u003cli\u003eCharge Voltage Limit: 4.2 ± 0.03V (0℃ - 45\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e℃)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStandard Discharge Current: 375mA (0.5C @ 0℃ - 45 ℃)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaximum Charge Current: 750mA (1.0C)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaximum Discharge Current: 1.6A (2.0C)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInternal Impedance ≤20mΩ at AC 1kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight ~22.0g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eTutorial\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/23B09OXYOcs\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","published_at":"2022-12-06T11:26:59+05:30","created_at":"2018-09-04T15:38:01+05:30","vendor":"ThinkRobotics","type":"Battery","tags":["16340","16340 Battery","3.7v","900 mAh","900mAh","Battery","CR123A","ELC-BATT","ELC5","LI-BATT","Li-Ion","Lithium Battery","RCR123A","ZOHO UPDATED"],"price":22999,"price_min":22999,"price_max":22999,"available":true,"price_varies":false,"compare_at_price":59900,"compare_at_price_min":59900,"compare_at_price_max":59900,"compare_at_price_varies":false,"variants":[{"id":39334535266390,"title":"3.7V 700mAh","option1":"3.7V 700mAh","option2":null,"option3":null,"sku":"ELC5013","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"16340 Li-Ion Battery CR123A (1 piece) - BIS Certified - 3.7V 700mAh","public_title":"3.7V 700mAh","options":["3.7V 700mAh"],"price":22999,"weight":51,"compare_at_price":59900,"inventory_management":"shopify","barcode":"ELC5013","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/16340-05-500x500.jpg?v=1624720365"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/16340-05-500x500.jpg?v=1624720365","options":["Capacity"],"media":[{"alt":"16340 Li-Ion Battery - BIS Certified","id":20938173546582,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/16340-05-500x500.jpg?v=1624720365"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/16340-05-500x500.jpg?v=1624720365","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis lithium ion battery with capacities of 500mAh and 700mAh. It is slim and easy to fit into many project cases. The batteries are unprotected and best work with out \u003ca title=\"16340 Battery Shield\" href=\"https:\/\/thinkrobotics.in\/products\/16340-single-battery-shield?_pos=1\u0026amp;_sid=56befef69\u0026amp;_ss=r\"\u003e16340 Battery Shield\u003c\/a\u003e and \u003ca title=\"Arduino Power Shield\" href=\"https:\/\/thinkrobotics.in\/products\/dual-16340-rechargeable-lithium-battery-charger-arduino-shield?_pos=3\u0026amp;_sid=6c21746e4\u0026amp;_ss=r\"\u003e16340 Arduino Shield\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLike most lithium-ion packs, the batteries we sell do not have thermistors built in. This is why we suggest charging at 1\/2C or even less - 0.5A max in this case. Of course, you can charge at a lower rate - it'll just take a little longer to fill up.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAdditional safety notes:\u003c\/strong\u003e\u003cspan\u003e Do not use a NiMH\/NiCad\/lead-acid charger! Also, do not abuse these batteries, do not short, bend, crush or puncture. \u003c\/span\u003e\u003cstrong\u003eNever charge or use unattended. Always inspect batteries and surrounding circuitry constantly for any damage, loose wiring, or possibility of short circuits.\u003c\/strong\u003e\u003cspan\u003e Polarity matches all Adafruit LiPoly\/LiIon chargers and boards, other brands may have reverse polarity and can destroy your battery. As with all Lithium ion polymer batteries and with any power source - they should be used by experts who are comfortable working with power supplies.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNOTE: Batteries once sold are non-returnable and non-exchangeable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eStorage Voltage: 3.85V - 3.95V\u003c\/li\u003e\n\u003cli\u003eNominal Capacity: 900 mAh @ 0.2C discharge; 720 mAh @ 0.5C discharge\u003c\/li\u003e\n\u003cli\u003eNominal Voltage: 3.7V\u003c\/li\u003e\n\u003cli\u003eDischarge Cut-Off Voltage: 2.75V\u003c\/li\u003e\n\u003cli\u003eCharge Voltage Limit: 4.2 ± 0.03V (0℃ - 45\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e℃)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStandard Discharge Current: 375mA (0.5C @ 0℃ - 45 ℃)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaximum Charge Current: 750mA (1.0C)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaximum Discharge Current: 1.6A (2.0C)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInternal Impedance ≤20mΩ at AC 1kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight ~22.0g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eTutorial\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/23B09OXYOcs\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e"}
