TP4056 Lithium Battery Charger Module
TP4056 Lithium Battery Charger Module
TP4056 Lithium Battery Charger Module
Need Support? Click Here
Free Delivery Above ā‚¹999

Best seller

ThinkRobotics

TP4056 Lithium Battery Charger Module

SKU: ELC5006

ā‚¹ 28.99 ā‚¹ 102.00

Out of stock

Select variant

Without Soldered Pin
šŸ“¦ Min order 1
Chat with us on WhatsApp We reply quickly! Contact Us
TP4056 Lithium Battery Charger ModuleWithout Soldered Pinā‚¹ 28.99
Ask AI about this product
Open in ChatGPT Open in Claude Open in Gemini
  • 100% brand new and high quality
  • Charge module: Linear charging
  • Current: 1A adjustable
  • Charge precision: 1.5%.
  • Input voltage: 4.5V-5.5V
  • Full charge voltage: 4.2V
  • LED indicator: Red is charging. Green is full charged.
  • Input interface: Micro USB
  • Working temperature: -10Ā° to +85Ā°
  • Inversed polarity: NO
  • Ampere meter can only be connected to 5v input end of the module.
  • It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
  • The connection wire should not be too thick.
  • Make sure the connect point is good.
  • If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage to chip.
  • NO Reveral polarity.
Specifications

Resources

Datasheet

Tutorial
What input power and interface does this module require
The module accepts 4.5 to 5.5 volt input via a Micro USB interface and the charging current is adjustable up to 1 A.
How should I set the charging current for my battery and what is the recommended value
The module supports an adjustable charging current up to 1 A. It is recommended that the charging current be about 37 percent of the battery capacity; for a 1000 mAh battery this means about 400 mA.
What do the LED indicators mean
Red means charging and Green means the battery is fully charged.
Are there any protection or polarity issues to know about
The module includes a protection function that auto subtracts the charging current to avoid burn damage to the chip. There is no reversed polarity protection, so connect with correct polarity, and the ampere meter can only be connected to the 5V input end.
What are some setup tips and key specifications to know
Full charge voltage is 4.2V and the module operates from minus 10 to 85 degrees Celsius. Use appropriate connection wires and ensure a solid connection; if the input voltage is high such as 5.2 V the current may be less than 1 A, which is normal.
A
Admin
Welcome to the discussion thread for TP4056 Lithium Battery Charger Module
Feel free to ask questions, share tips or report issues.

Discover More In:

Batteries & Chargers ā†’ Battery Chargers ā†’ Power ā†’

Category: View all Breakout Boards

Fill out the form below and our team will get back to you with bulk pricing.

Description
Ask AI about this product
Open in ChatGPT Open in Claude Open in Gemini
  • 100% brand new and high quality
  • Charge module: Linear charging
  • Current: 1A adjustable
  • Charge precision: 1.5%.
  • Input voltage: 4.5V-5.5V
  • Full charge voltage: 4.2V
  • LED indicator: Red is charging. Green is full charged.
  • Input interface: Micro USB
  • Working temperature: -10Ā° to +85Ā°
  • Inversed polarity: NO
  • Ampere meter can only be connected to 5v input end of the module.
  • It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
  • The connection wire should not be too thick.
  • Make sure the connect point is good.
  • If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage to chip.
  • NO Reveral polarity.
Specifications

Resources

Datasheet

Tutorial
FAQ
What input power and interface does this module require
The module accepts 4.5 to 5.5 volt input via a Micro USB interface and the charging current is adjustable up to 1 A.
How should I set the charging current for my battery and what is the recommended value
The module supports an adjustable charging current up to 1 A. It is recommended that the charging current be about 37 percent of the battery capacity; for a 1000 mAh battery this means about 400 mA.
What do the LED indicators mean
Red means charging and Green means the battery is fully charged.
Are there any protection or polarity issues to know about
The module includes a protection function that auto subtracts the charging current to avoid burn damage to the chip. There is no reversed polarity protection, so connect with correct polarity, and the ampere meter can only be connected to the 5V input end.
What are some setup tips and key specifications to know
Full charge voltage is 4.2V and the module operates from minus 10 to 85 degrees Celsius. Use appropriate connection wires and ensure a solid connection; if the input voltage is high such as 5.2 V the current may be less than 1 A, which is normal.
Reviews
Forum
A
Admin
Welcome to the discussion thread for TP4056 Lithium Battery Charger Module
Feel free to ask questions, share tips or report issues.
Similar Products

Discover More In:

Batteries & Chargers ā†’ Battery Chargers ā†’ Power ā†’

Category: View all Breakout Boards

Bulk Order

Fill out the form below and our team will get back to you with bulk pricing.

Custom Requirements?

Meet with our team

Related products

Related products

0106-14

Waldom Electonics

0106-14

ā‚¹ 2,623.53