SenseCAP LoRaWAN S2120 Weather Station collects and uploads air temperature, humidity, wind speed/direction, Rainfall Intensity, light intensity, UV index, and barometric pressure data supporte...
Laser Sensor
Principle: The emitting part of the laser sensor is a 180KHz oscillator emitted by an oscillator tube, amplified by a triode, the laser tube emits light, and the receiving part rece...
Features:
Noncontact detection,moving object detecting
Transmitting frequency:24GHZ,can be widely applied in business,industries,word controlling etc
Provide various frequency range standa...
This gray scale sensor is able to measure the intensity of light from black to white. A gray scale is also known as black-and-white, are composed exclusively of shades of gray, varying from blac...
Model number
LJ30A3-10-Z/EX (NO - Normally Open)
External dimensions
M30x75
Installation type
Shielded
Detection distance
10mm
Setting distance
0-8 mm
Supply voltage
6-36Vdc; 90-2...
Module via a serial communication interface, directly with 3.3V or 5V power microcontroller communication: Module data transmission feet (2 Foot TD) connected to the data bit machine receiving end...
Max.sensitivity: 570nm
Semi sensitivity angle: +/-60degree
Light sensors have all sorts of practical uses in the modern era, most notably in devices with auto-brightness for their screens a...
This pressure sensor from Freescale is a great low-cost sensing solution for precision measurement of barometric pressure and altitude. The MPL3115A2 has a typical 1.5 Pascal resolution, which can ...
The GP2Y0A21 Sharp distance sensor is a great way to add obstacle avoidance or motion sensing to your robot or any other project. With a detection range of 4″ to 32″ (10 cm to 80 cm) and an analog ...
DESCRIPTION
The MAX6675 Thermocouple Temperature Module is a K-Type thermocouple with digital converter that has a range of 0°C up to 80°C with the supplied thermocouple and up to 1024°C with a su...
Heating voltage: 5+-0.2V (AC - DC)
Working current: 5-10mA
The detection concentration range: PH0-14
The detection range of temperature: 0-80 centigrade
The response time: ≤ 5S
Stability tim...
HB Series of microwave motion sensor module are X-Band Mono-static DRO Doppler transceiver front-end module. These modules are designed for movement detection, like intruder alarms, occupancy modul...
An electronic brick is an electronic module which can be assembled like Lego bricks simply by plugging in and pulling out. Compared to traditional universal boards and circuit modules assembled wit...
Rain sensors are used in the detection of water beyond what a humidity sensor can detect.
It can be used as a switch when raindrop falls on the rain board and also for measuring rainfall intensity...
UART Fingerprint Sensor (D)
Capacitive 360° Verification
Nail Plate-Sized, UART Commands Operation
Features
Based on a high performance Cortex processor, combined with high-security commerc...
A simple but very useful module which uses a potential divider to reduce any input voltage by a factor of 5. This allows you to use the analogue input of a microcontroller to monitor voltages much ...
This is a great new thermocouple amplifier/converter that can handle just about any type of thermocouple, and even has the ability to give you notification when the temperature goes out of range, o...
Water Sensor water level sensor is an easy-to-use, cost-effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water v...
Electronics Fun Kit with 830 Breadboard & Components
The Arduino DIY Starter Kit is a comprehensive electronics development kit designed for beginners, students, and professionals working on em...
This optical dust sensor can measure the air quality by measuring on air particles/dust. The Air Quality Index (IAQ) is fairly easy to determine using an Arduino (or ESP32, ESP8266) and a DSM501 se...
The LX1972 is a low cost silicon light sensor with spectral response that closely emulates the human eye. The patented circuit produces a maximum spectral response of 5% nm, less than IR with a res...
3D printed parts are of low finish. Lot.of sharp edges on parts. Also the fitment of the parts are not happening because of excess material. Most often the parts have to be filed or reworked. Screws are given in exact number as needed. If one screw is missed, then the assembly is impossible
The consignment was not dispatched as per committed date and had to pursue for dispatch information. The courier didn,t deliver us despit lying in Jaipur and we had to personally collect it from Courier Hub adding to inconvenience. The logistics need to be improved. Just a feedback.
