The LX1972 is a low cost silicon light sensor with spectral response that closely emulates the human eye. Patented circuitry produces peak spectral response at 520nm, with IR response less than ±5%, of the peak response, above 900nm.
The photo sensor is a PIN diode array with a linear, accurate, and very repeatable current transfer function.
High gain current mirrors on the chip multiply the PIN diode photo-current to a sensitivity level that can be voltage scaled with a standard value external resistor. Output current from this simple to use two-pin device can be used directly or converted to a voltage by placing it in series with a single resistor at either of its two pins.
Dynamic range is determined by the resistors (typically in the range of 10K to 100K) and power supply values. Typically the LX1972 needs only 1.8V of headroom to operate at 1000 Lux illumination.
Internal temperature compensation allows dark current to be kept below 200nA over the full specification.
Temperature range (-40 to +85°C), providing high accuracy at low light levels. Usable ambient light conditions range is from 1 to more than 5000 Lux.
The LX1972 is optimized for controlling back lighting systems in low cost consumer products such as LCD TV, portable computers, and digital cameras.
Specifications
Near Human Eye Spectral Response.
Very Low IR Sensitivity.
Highly Accurate & Repeatable Output Current vs. Light.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Shopping Cart
{"id":1644732973128,"title":"LX1972 Analog Light Sensor","handle":"lx1972-analog-light-sensor","description":"\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"2114.10010108.1000023.i0.2efe26b3IFzIHY\"\u003eThe LX1972 is a low cost silicon light sensor with spectral response that closely emulates the human eye. Patented circuitry produces peak spectral response at 520nm, with IR response less than ±5%, of the peak response, above 900nm.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThe photo sensor is a PIN diode array with a linear, accurate, and very repeatable current transfer function.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eHigh gain current mirrors on the chip multiply the PIN diode photo-current to a sensitivity level that can be voltage scaled with a standard value external resistor. Output current from this simple to use two-pin device can be used directly or converted to a voltage by placing it in series with a single resistor at either of its two pins.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eDynamic range is determined by the resistors (typically in the range of 10K to 100K) and power supply values. Typically the LX1972 needs only 1.8V of headroom to operate at 1000 Lux illumination.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eInternal temperature compensation allows dark current to be kept below 200nA over the full specification.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eTemperature range (-40 to +85°C), providing high accuracy at low light levels. Usable ambient light conditions range is from 1 to more than 5000 Lux.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThe LX1972 is optimized for controlling back lighting systems in low cost consumer products such as LCD TV, portable computers, and digital cameras.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003ch5\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eNear Human Eye Spectral Response.\u003c\/li\u003e\n\u003cli\u003eVery Low IR Sensitivity.\u003c\/li\u003e\n\u003cli\u003eHighly Accurate \u0026amp; Repeatable Output Current vs. Light.\u003c\/li\u003e\n\u003cli\u003eScalable Output Voltage.\u003c\/li\u003e\n\u003cli\u003eTemperature Stable.\u003c\/li\u003e\n\u003cli\u003eIntegrated High Gain Photo Current Amplifiers.\u003c\/li\u003e\n\u003cli\u003eNo Optical Filters Needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eResources\u003c\/h5\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1034\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDatasheet\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/SAMPLE_CODE\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1034\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSample Code\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch5\u003eTutorials\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/pxR6e-3XkIk\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cdiv\u003e\u003c\/div\u003e","published_at":"2023-03-26T12:51:05+05:30","created_at":"2019-02-27T06:53:19+05:30","vendor":"ThinkRobotics","type":"Sensor","tags":["analog","ELC1","LGT-SNR","Light","Lux","Sensor","ZOHO UPDATED"],"price":38499,"price_min":38499,"price_max":38499,"available":false,"price_varies":false,"compare_at_price":41000,"compare_at_price_min":41000,"compare_at_price_max":52000,"compare_at_price_varies":true,"variants":[{"id":27847006814280,"title":"Without Soldered Pin","option1":"Without Soldered Pin","option2":null,"option3":null,"sku":"ELC1034","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"LX1972 Analog Light Sensor - Without Soldered Pin","public_title":"Without Soldered Pin","options":["Without Soldered Pin"],"price":38499,"weight":10,"compare_at_price":41000,"inventory_management":"shopify","barcode":"ELC1034","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":16176034480200,"title":"With Soldered Pin","option1":"With Soldered Pin","option2":null,"option3":null,"sku":"ELC1034S","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"LX1972 Analog Light Sensor - With Soldered Pin","public_title":"With Soldered Pin","options":["With Soldered Pin"],"price":38499,"weight":10,"compare_at_price":52000,"inventory_management":"shopify","barcode":"ELC1034S","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/lx1972-analog-light-sensor-microsemi-silicon-light-sensor-emulates-human-eye.jpg?v=1577794121","\/\/thinkrobotics.com\/cdn\/shop\/products\/BE-02-0940-800x800.JPG?v=1577794121"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/lx1972-analog-light-sensor-microsemi-silicon-light-sensor-emulates-human-eye.jpg?v=1577794121","options":["Soldered"],"media":[{"alt":"LX1972 Analog Light Sensor - ThinkRobotics.in","id":854959390792,"position":1,"preview_image":{"aspect_ratio":1.0,"height":458,"width":458,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/lx1972-analog-light-sensor-microsemi-silicon-light-sensor-emulates-human-eye.jpg?v=1577794121"},"aspect_ratio":1.0,"height":458,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/lx1972-analog-light-sensor-microsemi-silicon-light-sensor-emulates-human-eye.jpg?v=1577794121","width":458},{"alt":"LX1972 Analog Light Sensor - ThinkRobotics.in","id":854959456328,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/BE-02-0940-800x800.JPG?v=1577794121"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/BE-02-0940-800x800.JPG?v=1577794121","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"2114.10010108.1000023.i0.2efe26b3IFzIHY\"\u003eThe LX1972 is a low cost silicon light sensor with spectral response that closely emulates the human eye. Patented circuitry produces peak spectral response at 520nm, with IR response less than ±5%, of the peak response, above 900nm.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThe photo sensor is a PIN diode array with a linear, accurate, and very repeatable current transfer function.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eHigh gain current mirrors on the chip multiply the PIN diode photo-current to a sensitivity level that can be voltage scaled with a standard value external resistor. Output current from this simple to use two-pin device can be used directly or converted to a voltage by placing it in series with a single resistor at either of its two pins.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eDynamic range is determined by the resistors (typically in the range of 10K to 100K) and power supply values. Typically the LX1972 needs only 1.8V of headroom to operate at 1000 Lux illumination.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eInternal temperature compensation allows dark current to be kept below 200nA over the full specification.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eTemperature range (-40 to +85°C), providing high accuracy at low light levels. Usable ambient light conditions range is from 1 to more than 5000 Lux.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThe LX1972 is optimized for controlling back lighting systems in low cost consumer products such as LCD TV, portable computers, and digital cameras.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003ch5\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eNear Human Eye Spectral Response.\u003c\/li\u003e\n\u003cli\u003eVery Low IR Sensitivity.\u003c\/li\u003e\n\u003cli\u003eHighly Accurate \u0026amp; Repeatable Output Current vs. Light.\u003c\/li\u003e\n\u003cli\u003eScalable Output Voltage.\u003c\/li\u003e\n\u003cli\u003eTemperature Stable.\u003c\/li\u003e\n\u003cli\u003eIntegrated High Gain Photo Current Amplifiers.\u003c\/li\u003e\n\u003cli\u003eNo Optical Filters Needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eResources\u003c\/h5\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1034\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDatasheet\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/SAMPLE_CODE\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1034\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSample Code\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch5\u003eTutorials\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/pxR6e-3XkIk\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cdiv\u003e\u003c\/div\u003e"}
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
Team is suppotive and solves all the queries .
The product is good and will surely help me in my project...looking forward for more trades with think robotics.
