Based on the modification of ABS material, it has higher mechanical properties, lower odor and lower shrinkage rate than conventional ABS materials. With high toughness and high impact resistance, ABS+ can be used to print sturdy and durable parts; low VOC volatile content, low odor during printing, comfortable printing without pressure; low shrinkage, not easy to warp and crack during printing.
Features
- Heat resistance
- Sturdy and durable
- High toughness
- Low odor
- Low shrinkage
- High impact resistance
- Excellent printability
Technical Datasheet can be found here!
Notes:
- The shrinkage rate of ABS+ material is large, so you should pay attention to heat preservation when printing and print in a printer with a closed chamber.
- The cooling of ABS+ is slightly worse. You can turn on a fan to improve the printing effect or reduce the drape angle structure in the model; or try to reduce the speed to print.
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | ABS+ |
| Density(g/cm3) | 1.06 |
| Heat Distortion Temp(℃,0.45MPa) | 73 |
| Melt Flow Index(g/10min) | 15(220℃/10kg） |
| Tensile Strength(MPa) | 40 |
| Elongation at Break(%) | 30 |
| Flexural Strength(MPa) | 68 |
| Flexural Modulus(MPa) | 1203 |
| IZOD Impact Strength(kJ/㎡) | 42 |
| Durability | 8/10 |
| Printability | 8/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 230 – 270℃ Recommended temperature：240℃ |
| Bed temperature(℃) | 95 – 110°C |
| Fan Speed | 0% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Required |
| Recommended Build Surfaces | High temperature tape, PVP solid glue |
| Feature | |
| Flexible | —— |
| Elastic | —— |
| Impact Resistant | √ |
| Soft | —— |
| Composite | —— |
| UV Resistant | —— |
| Water Resistant | —— |
| Dissolvable | —— |
| Heat Resistant | √ |
| Chemically Resistant | —— |
| Fatigue Resistant | —— |
| Need drying | —— |
| Heated Bed Required | √ |
| Print recommend | Print in an enclosed space |
Want to buy in bulk?
Custom Requirements?
Discussion Forum
Welcome to the discussion thread for eSun ABS Filament (1kg)
Feel free to ask questions, share tips or report issues.
Feel free to ask questions, share tips or report issues.