BME280 sensor, an environmental sensor with temperature, barometric pressure and humidity! This sensor is great for all sorts of weather/environmental sensing and can even be used in I2C.
This precision sensor from Bosch is the best low-cost sensing solution for measuring humidity with ±3% accuracy, barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with ±1 meter or better accuracy!
The BME280 is the next-generation of sensors from Bosch and is the upgrade to the BMP085/BMP180/BMP183 - with a low altitude noise of 0.25m and the same fast conversion time. For simple easy wiring, go with I2C.
So far, all the products that we have purchased from Think Robotics have been accurate. Only in the last order, we faced a small issue where the product accuracy was slightly lower, but this was resolved with the help of Think Robotics staff. Overall, everything is satisfactory, and we would recommend everyone to prefer Think Robotics products.
{"id":1622240460872,"title":"BME280 I2C Temperature Humidity Pressure Sensor Breakout (5V)","handle":"bme280-digital-sensor","description":"\u003cp\u003e\u003cspan\u003eBME280 sensor, an environmental sensor with temperature, barometric pressure and humidity! This sensor is great for all sorts of weather\/environmental sensing and can even be used in I2C.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis precision sensor from Bosch is the best low-cost sensing solution for measuring humidity with ±3% accuracy, barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with ±1 meter or better accuracy!\u003c\/p\u003e\n\u003cp\u003eThe BME280 is the next-generation of sensors from Bosch and is the upgrade to the BMP085\/BMP180\/BMP183 - with a low altitude noise of 0.25m and the same fast conversion time. For simple easy wiring, go with I2C.\u003c\/p\u003e\n\u003cp\u003eSupply Voltage: 1.8 - 5V DC\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInterface: I2C (up to 3.4MHz)\u003c\/li\u003e\n\u003cli\u003eOperational Range:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature: -40 to +85°C\u003c\/li\u003e\n\u003cli\u003eHumidity: 0-100%\u003c\/li\u003e\n\u003cli\u003ePressure: 300-1100 hPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eResolution:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature: 0.01°C\u003c\/li\u003e\n\u003cli\u003eHumidity: 0.008%\u003c\/li\u003e\n\u003cli\u003ePressure: 0.18Pa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eAccuracy:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature: +-1°C\u003c\/li\u003e\n\u003cli\u003eHumidity: +-3%\u003c\/li\u003e\n\u003cli\u003ePressure: +-1Pa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eI2C address\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSDO LOW : 0x76\u003c\/li\u003e\n\u003cli\u003eSDO HIGH: 0x77\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Annotation_2020-04-10_165222_480x480.jpg?v=1586517774\"\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eResources\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"%20https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1026\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/LIBRARIES\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1026\" target=\"_blank\"\u003eLibraries \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/SAMPLE_CODE\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1026\" target=\"_blank\"\u003eSample Code\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTutorials\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/7dwWYn9_OhA\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/vna84mFl4Uc\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","published_at":"2022-12-06T11:26:14+05:30","created_at":"2019-02-06T15:28:45+05:30","vendor":"ThinkRobotics","type":"Sensor","tags":["Arduino sensor","bme","BME280","BME680","BMP280","bosch","bosch sensor","ELC1","ENVR-SNR","Humidity Sensor","I2C sensor","Pressure Sensor","Sensor","Temperature Sensor","ZOHO UPDATED"],"price":49999,"price_min":49999,"price_max":49999,"available":true,"price_varies":false,"compare_at_price":159599,"compare_at_price_min":159599,"compare_at_price_max":159599,"compare_at_price_varies":false,"variants":[{"id":32204569346134,"title":"Without Soldered Pins","option1":"Without Soldered Pins","option2":null,"option3":null,"sku":"ELC1026","requires_shipping":true,"taxable":true,"featured_image":{"id":4673533476936,"product_id":1622240460872,"position":1,"created_at":"2019-02-06T15:40:38+05:30","updated_at":"2020-03-19T03:52:13+05:30","alt":"BME280 I2C Temperature Humidity Pressure Sensor Breakout","width":764,"height":764,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3In1-BME280-GY-BME280-Digital-Sensor-SPI-I2C-Humidity-Temperature-and-Barometric-Pressure-Sensor-Module-1.jpg?v=1584570133","variant_ids":[32204569346134]},"available":true,"name":"BME280 I2C Temperature Humidity Pressure Sensor Breakout (5V) - Without Soldered Pins","public_title":"Without Soldered Pins","options":["Without Soldered Pins"],"price":49999,"weight":10,"compare_at_price":159599,"inventory_management":"shopify","barcode":"ELC1026","featured_media":{"alt":"BME280 I2C Temperature Humidity Pressure Sensor Breakout","id":822516908104,"position":1,"preview_image":{"aspect_ratio":1.0,"height":764,"width":764,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3In1-BME280-GY-BME280-Digital-Sensor-SPI-I2C-Humidity-Temperature-and-Barometric-Pressure-Sensor-Module-1.jpg?v=1584570133"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":15994914308168,"title":"With Soldered Pin","option1":"With Soldered Pin","option2":null,"option3":null,"sku":"ELC1026S","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"BME280 I2C Temperature Humidity Pressure Sensor Breakout (5V) - With Soldered Pin","public_title":"With Soldered Pin","options":["With Soldered Pin"],"price":49999,"weight":10,"compare_at_price":159599,"inventory_management":"shopify","barcode":"ELC1026S","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/3In1-BME280-GY-BME280-Digital-Sensor-SPI-I2C-Humidity-Temperature-and-Barometric-Pressure-Sensor-Module-1.jpg?v=1584570133","\/\/thinkrobotics.com\/cdn\/shop\/products\/3In1-BME280-GY-BME280-Digital-Sensor-SPI-I2C-Humidity-Temperature-and-Barometric-Pressure-Sensor-Module-1.jpg-2.jpg?v=1584570133"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3In1-BME280-GY-BME280-Digital-Sensor-SPI-I2C-Humidity-Temperature-and-Barometric-Pressure-Sensor-Module-1.jpg?v=1584570133","options":["Soldered"],"media":[{"alt":"BME280 I2C Temperature Humidity Pressure Sensor Breakout","id":822516908104,"position":1,"preview_image":{"aspect_ratio":1.0,"height":764,"width":764,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3In1-BME280-GY-BME280-Digital-Sensor-SPI-I2C-Humidity-Temperature-and-Barometric-Pressure-Sensor-Module-1.jpg?v=1584570133"},"aspect_ratio":1.0,"height":764,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3In1-BME280-GY-BME280-Digital-Sensor-SPI-I2C-Humidity-Temperature-and-Barometric-Pressure-Sensor-Module-1.jpg?v=1584570133","width":764},{"alt":"BME280 I2C Temperature Humidity Pressure Sensor Breakout","id":822516940872,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1004,"width":1004,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3In1-BME280-GY-BME280-Digital-Sensor-SPI-I2C-Humidity-Temperature-and-Barometric-Pressure-Sensor-Module-1.jpg-2.jpg?v=1584570133"},"aspect_ratio":1.0,"height":1004,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3In1-BME280-GY-BME280-Digital-Sensor-SPI-I2C-Humidity-Temperature-and-Barometric-Pressure-Sensor-Module-1.jpg-2.jpg?v=1584570133","width":1004}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eBME280 sensor, an environmental sensor with temperature, barometric pressure and humidity! This sensor is great for all sorts of weather\/environmental sensing and can even be used in I2C.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis precision sensor from Bosch is the best low-cost sensing solution for measuring humidity with ±3% accuracy, barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with ±1 meter or better accuracy!\u003c\/p\u003e\n\u003cp\u003eThe BME280 is the next-generation of sensors from Bosch and is the upgrade to the BMP085\/BMP180\/BMP183 - with a low altitude noise of 0.25m and the same fast conversion time. For simple easy wiring, go with I2C.\u003c\/p\u003e\n\u003cp\u003eSupply Voltage: 1.8 - 5V DC\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInterface: I2C (up to 3.4MHz)\u003c\/li\u003e\n\u003cli\u003eOperational Range:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature: -40 to +85°C\u003c\/li\u003e\n\u003cli\u003eHumidity: 0-100%\u003c\/li\u003e\n\u003cli\u003ePressure: 300-1100 hPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eResolution:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature: 0.01°C\u003c\/li\u003e\n\u003cli\u003eHumidity: 0.008%\u003c\/li\u003e\n\u003cli\u003ePressure: 0.18Pa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eAccuracy:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature: +-1°C\u003c\/li\u003e\n\u003cli\u003eHumidity: +-3%\u003c\/li\u003e\n\u003cli\u003ePressure: +-1Pa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eI2C address\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSDO LOW : 0x76\u003c\/li\u003e\n\u003cli\u003eSDO HIGH: 0x77\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Annotation_2020-04-10_165222_480x480.jpg?v=1586517774\"\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eResources\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"%20https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1026\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/LIBRARIES\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1026\" target=\"_blank\"\u003eLibraries \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/SAMPLE_CODE\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1026\" target=\"_blank\"\u003eSample Code\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTutorials\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/7dwWYn9_OhA\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/vna84mFl4Uc\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e"}
