The Arduino Pro Mini is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not have connectors populated, so you can solder in any connector or wire with any orientation you need. We recommend first-time Arduino users start with the Uno R3. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off-board.
We wanted to minimize the cost of an Arduino. To accomplish this, we used all SMD components, made it two layers, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable, but the FTDI cable does not bring out the DTR pin, so the auto-reset feature will not work. There is a voltage regulator on board to accept voltage up to 12VDC. If you’re supplying unregulated power to the board, connect to the “RAW” pin, not VCC.
Compatible with the Arduinoline of products. Trademark registrations throughout the world for ARDUINO or Arduino® are owned by: Arduino AG and Arduino SA.
Features:
ATmega328 running at 8MHz with external resonator (0.5% tolerance)
Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
Team is suppotive and solves all the queries .
The product is good and will surely help me in my project...looking forward for more trades with think robotics.
{"id":1623558946888,"title":"Pro Mini 328 - 3.3V\/8MHz","handle":"arduino-pro-mini-328-online","description":"\u003cp\u003eThe Arduino Pro Mini is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not have connectors populated, so you can solder in any connector or wire with any orientation you need. We recommend first-time Arduino users start with the Uno R3. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off-board.\u003c\/p\u003e\n\u003cp\u003eWe wanted to minimize the cost of an Arduino. To accomplish this, we used all SMD components, made it two layers, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable, but the FTDI cable does not bring out the DTR pin, so the auto-reset feature will not work. There is a voltage regulator on board to accept voltage up to 12VDC. If you’re supplying unregulated power to the board, connect to the “RAW” pin, not VCC.\u003cbr\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eCompatible with the Arduino\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003el\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eine of products. Trademark registrations throughout the world for ARDUINO or Arduino® are owned by: Arduino AG and Arduino SA. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eATmega328 running at 8MHz with external resonator (0.5% tolerance)\u003c\/li\u003e\n\u003cli\u003eLow-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)\u003c\/li\u003e\n\u003cli\u003e0.8mm Thin PCB\u003c\/li\u003e\n\u003cli\u003eUSB connection off board\u003c\/li\u003e\n\u003cli\u003eWeighs less than 2 grams!\u003c\/li\u003e\n\u003cli\u003eSupports auto-reset\u003c\/li\u003e\n\u003cli\u003e3.3V regulator\u003c\/li\u003e\n\u003cli\u003eMax 150mA output\u003c\/li\u003e\n\u003cli\u003eOver current protected\u003c\/li\u003e\n\u003cli\u003eDC input 3.3V up to 12V\u003c\/li\u003e\n\u003cli\u003eOn board Power and Status LEDs\u003c\/li\u003e\n\u003cli\u003eAnalog Pins: 8\u003c\/li\u003e\n\u003cli\u003eDigital I\/Os: 14\u003c\/li\u003e\n\u003cli\u003e0.7x1.3\" (18x33mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/components101.com\/sites\/default\/files\/component_pin\/Arduino-Pro-Mini-Pin-Diagram.png\" width=\"399\" height=\"270\"\u003e\u003c\/p\u003e\n\u003ch5\u003eResources\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ARDUINO\/ARD1001\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/SAMPLE_CODE\/tree\/master\/ARDUINO\/ARD1001\"\u003eSample Code\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTutorials\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5kweb83jPAM\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e","published_at":"2022-12-06T11:26:10+05:30","created_at":"2019-02-08T13:18:46+05:30","vendor":"Arduino","type":"Arduino","tags":["3.3V","8MHz","ARD-BRD","ARD1","Arduino","Arduino Pro Mini","Atmega328","microcontroller","Pro Mini","ZOHO UPDATED"],"price":47999,"price_min":47999,"price_max":51999,"available":true,"price_varies":true,"compare_at_price":49900,"compare_at_price_min":49900,"compare_at_price_max":49900,"compare_at_price_varies":false,"variants":[{"id":27846917783624,"title":"Without Soldered Pin","option1":"Without Soldered Pin","option2":null,"option3":null,"sku":"ARD1001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Pro Mini 328 - 3.3V\/8MHz - Without Soldered Pin","public_title":"Without Soldered Pin","options":["Without Soldered Pin"],"price":47999,"weight":40,"compare_at_price":49900,"inventory_management":"shopify","barcode":"ARD1001","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":16001095106632,"title":"With Soldered Pin","option1":"With Soldered Pin","option2":null,"option3":null,"sku":"ARD1001S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Pro Mini 328 - 3.3V\/8MHz - With Soldered Pin","public_title":"With Soldered Pin","options":["With Soldered Pin"],"price":51999,"weight":40,"compare_at_price":49900,"inventory_management":"shopify","barcode":"ARD1001S","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/ProMini_3.3V_-3.jpg?v=1577794039","\/\/thinkrobotics.com\/cdn\/shop\/products\/ProMini_3.3V_-2.jpg?v=1577794039","\/\/thinkrobotics.com\/cdn\/shop\/products\/ProMini_3.3V_-1.jpg?v=1577794039"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/ProMini_3.3V_-3.jpg?v=1577794039","options":["Soldered"],"media":[{"alt":"Arduino Pro Mini 328 Online","id":824316624968,"position":1,"preview_image":{"aspect_ratio":1.288,"height":594,"width":765,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/ProMini_3.3V_-3.jpg?v=1577794039"},"aspect_ratio":1.288,"height":594,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/ProMini_3.3V_-3.jpg?v=1577794039","width":765},{"alt":"Arduino Pro Mini 328 Online","id":824316657736,"position":2,"preview_image":{"aspect_ratio":1.108,"height":701,"width":777,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/ProMini_3.3V_-2.jpg?v=1577794039"},"aspect_ratio":1.108,"height":701,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/ProMini_3.3V_-2.jpg?v=1577794039","width":777},{"alt":"Arduino Pro Mini 328 Online","id":824316690504,"position":3,"preview_image":{"aspect_ratio":1.104,"height":670,"width":740,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/ProMini_3.3V_-1.jpg?v=1577794039"},"aspect_ratio":1.104,"height":670,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/ProMini_3.3V_-1.jpg?v=1577794039","width":740}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Arduino Pro Mini is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not have connectors populated, so you can solder in any connector or wire with any orientation you need. We recommend first-time Arduino users start with the Uno R3. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off-board.\u003c\/p\u003e\n\u003cp\u003eWe wanted to minimize the cost of an Arduino. To accomplish this, we used all SMD components, made it two layers, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable, but the FTDI cable does not bring out the DTR pin, so the auto-reset feature will not work. There is a voltage regulator on board to accept voltage up to 12VDC. If you’re supplying unregulated power to the board, connect to the “RAW” pin, not VCC.\u003cbr\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eCompatible with the Arduino\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003el\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eine of products. Trademark registrations throughout the world for ARDUINO or Arduino® are owned by: Arduino AG and Arduino SA. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eATmega328 running at 8MHz with external resonator (0.5% tolerance)\u003c\/li\u003e\n\u003cli\u003eLow-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)\u003c\/li\u003e\n\u003cli\u003e0.8mm Thin PCB\u003c\/li\u003e\n\u003cli\u003eUSB connection off board\u003c\/li\u003e\n\u003cli\u003eWeighs less than 2 grams!\u003c\/li\u003e\n\u003cli\u003eSupports auto-reset\u003c\/li\u003e\n\u003cli\u003e3.3V regulator\u003c\/li\u003e\n\u003cli\u003eMax 150mA output\u003c\/li\u003e\n\u003cli\u003eOver current protected\u003c\/li\u003e\n\u003cli\u003eDC input 3.3V up to 12V\u003c\/li\u003e\n\u003cli\u003eOn board Power and Status LEDs\u003c\/li\u003e\n\u003cli\u003eAnalog Pins: 8\u003c\/li\u003e\n\u003cli\u003eDigital I\/Os: 14\u003c\/li\u003e\n\u003cli\u003e0.7x1.3\" (18x33mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/components101.com\/sites\/default\/files\/component_pin\/Arduino-Pro-Mini-Pin-Diagram.png\" width=\"399\" height=\"270\"\u003e\u003c\/p\u003e\n\u003ch5\u003eResources\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ARDUINO\/ARD1001\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/SAMPLE_CODE\/tree\/master\/ARDUINO\/ARD1001\"\u003eSample Code\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTutorials\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5kweb83jPAM\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e"}
