Build Plate Adhesive for Ultrafuse 316L Metal Filament
MAGIGOO Metal is designed as a professional first layer adhesive with BASF Ultrafuse® 316L. Magigoo Metal is non-hazardous, non-flammable and also approved for use in post processing stages of BASF Ultrafuse® 316L. Magigoo Metal also enables easy part removal of the green parts from the build-plate.
BASF Ultrafuse 316L enables the production of solid 316L-grade stainless steel parts through the use of desktop FDM 3D printers and a sintering process. Ultrafuse® 316L filament consists of highly-refined metal particles embedded in thermoplastic binders. Thus as a filament, the metal-polymer composite comes with none of the occupational and safety hazards associated with the handling of fine metallic powders. This enables affordable, straightforward, and safe3D printing of stainless-steel parts.
Due to the thermoplastic nature of the filament binding materials and the differential thermal cooling during FDM printing, parts printed BASF Ultrafuse® 316L are susceptible to warp. Furthermore due to the delicate nature of the green part, care must be taken when removing parts printed in BASF Ultrafuse® 316L to avoid part deformation. Magigoo Metal provides sure and reliable adhesion during printing and enable the easy removal of the printed part through submersion in water, thus avoid potential damage to the green part.
For use of Magigoo Metal with BASF Ultrafuse® 316L a build-plate temperature of 95-105 °C is recommended, nonetheless, the printing conditions might vary between one printer and another.
| Step 1 | Shake the Bottle | Shake the bottle thoroughly before each use to ensure the adhesive is properly mixed. |
| Step 2 | Apply the Adhesive | Press the applicator nib against the build plate to activate the inner valve, then spread a thin, even layer of adhesive over the desired print area. |
| Step 3 | Start Printing | Begin printing according to the filament and 3D printer manufacturer's recommended settings. |
| Step 4 | Remove the Print | After printing, submerge the entire build plate in water or soak the area around the printed part. After approximately 30 minutes to 2 hours, depending on the size of the print, the part should release on its own or can be removed with a gentle twist. |
| Step 5 | Clean the Build Plate | Wipe away any remaining adhesive residue with a clean, damp cloth before the next application. |
Using this product with other than BASF Ultrafuse 316L filaments might cause over adhesion and damage your build surface. Follow the instructions found in the technical data sheet for best results
Magigoo Pro Metal is a professional-grade first-layer adhesive specifically engineered for BASF Ultrafuse® 316L metal filament. It solves the most common challenge in metal FDM printing: ensuring a solid bond while protecting delicate "green parts" during removal.
| Precision Engineered | Optimized for metal-filled polymer composites and high build plate temperatures (95°C–105°C), ensuring reliable first-layer adhesion. |
| Safe Removal | The water-soluble formula allows printed parts to release easily after a short soak, helping prevent damage or deformation of delicate prints. |
| Workflow Approved | Non-hazardous, non-flammable, and safe to use throughout post-processing and sintering workflows. |
| Easy Application | Features a convenient pen-style applicator that provides clean, controlled, and even adhesive coverage with every application. |
No reviews yet. Be the first to share your experience!
For more discussion Click Here
Discover More In:
Category: View all 3D Printer Accessories
Fill out the form below and our team will get back to you with bulk pricing.
Build Plate Adhesive for Ultrafuse 316L Metal Filament
MAGIGOO Metal is designed as a professional first layer adhesive with BASF Ultrafuse® 316L. Magigoo Metal is non-hazardous, non-flammable and also approved for use in post processing stages of BASF Ultrafuse® 316L. Magigoo Metal also enables easy part removal of the green parts from the build-plate.
BASF Ultrafuse 316L enables the production of solid 316L-grade stainless steel parts through the use of desktop FDM 3D printers and a sintering process. Ultrafuse® 316L filament consists of highly-refined metal particles embedded in thermoplastic binders. Thus as a filament, the metal-polymer composite comes with none of the occupational and safety hazards associated with the handling of fine metallic powders. This enables affordable, straightforward, and safe3D printing of stainless-steel parts.
Due to the thermoplastic nature of the filament binding materials and the differential thermal cooling during FDM printing, parts printed BASF Ultrafuse® 316L are susceptible to warp. Furthermore due to the delicate nature of the green part, care must be taken when removing parts printed in BASF Ultrafuse® 316L to avoid part deformation. Magigoo Metal provides sure and reliable adhesion during printing and enable the easy removal of the printed part through submersion in water, thus avoid potential damage to the green part.
For use of Magigoo Metal with BASF Ultrafuse® 316L a build-plate temperature of 95-105 °C is recommended, nonetheless, the printing conditions might vary between one printer and another.
| Step 1 | Shake the Bottle | Shake the bottle thoroughly before each use to ensure the adhesive is properly mixed. |
| Step 2 | Apply the Adhesive | Press the applicator nib against the build plate to activate the inner valve, then spread a thin, even layer of adhesive over the desired print area. |
| Step 3 | Start Printing | Begin printing according to the filament and 3D printer manufacturer's recommended settings. |
| Step 4 | Remove the Print | After printing, submerge the entire build plate in water or soak the area around the printed part. After approximately 30 minutes to 2 hours, depending on the size of the print, the part should release on its own or can be removed with a gentle twist. |
| Step 5 | Clean the Build Plate | Wipe away any remaining adhesive residue with a clean, damp cloth before the next application. |
Using this product with other than BASF Ultrafuse 316L filaments might cause over adhesion and damage your build surface. Follow the instructions found in the technical data sheet for best results
Magigoo Pro Metal is a professional-grade first-layer adhesive specifically engineered for BASF Ultrafuse® 316L metal filament. It solves the most common challenge in metal FDM printing: ensuring a solid bond while protecting delicate "green parts" during removal.
| Precision Engineered | Optimized for metal-filled polymer composites and high build plate temperatures (95°C–105°C), ensuring reliable first-layer adhesion. |
| Safe Removal | The water-soluble formula allows printed parts to release easily after a short soak, helping prevent damage or deformation of delicate prints. |
| Workflow Approved | Non-hazardous, non-flammable, and safe to use throughout post-processing and sintering workflows. |
| Easy Application | Features a convenient pen-style applicator that provides clean, controlled, and even adhesive coverage with every application. |
No reviews yet. Be the first to share your experience!
For more discussion Click Here
Discover More In:
Category: View all 3D Printer Accessories
Fill out the form below and our team will get back to you with bulk pricing.
Custom Requirements?
Related products
