This module features the MPU-9250, which is a multi-chip module (MCM) consisting of two dies integrated into a single QFN package. One die houses the 3-Axis gyroscope and the 3-Axis accelerometer. The other die houses the AK8963 3-Axis magnetometer.
Hence, the MPU-9250 is a 9-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer, and a Digital Motion Processor (DMP). The MPU-9250 also features an embedded temperature sensor. This module includes pull-up resistors on the SDA, SCL, and nCS lines, pull-down resistors on the FSYNC and AD0 lines, and an on-board 3.3V voltage regulator allowing you to power the module from 5V sources such as an Arduino. If you desire to power the module from 3.3V you can bridge the solder jumper next to the voltage regulator to bypass the regulator.
Specifications: * On-board pull-up resistors on SDA, SCL, and nCS * On-board pull-down resistors on FSYNC and AD0 * 3-Axis Accelerometer * Range: up to ± 16 g * Sensitivity: up to 16,384 LSB/g * 3-Axis Gyroscope * Range: up to ± 2000 deg/sec * Sensitivity: up to 131 LSB/deg/sec * 3-Axis Magnetometer * Range: ± 4800 μT * Sensitivity: 0.6 μT/LSB * Supply Voltage: 4.4 to 6.5 V or 3.3V if you solder the solder jumper near the on-board voltage regulator * Interface: I2C * 2C Address: 0x68 by default, 0x69 if AD0 is pulled high * Board Dimensions: 25.5mm (1.004") long x 15.4mm (0.606") wide, 3mm (0.118") inside diameter of mounting holes * Weight: 2.72g (0.096oz)
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Shopping Cart
{"id":6633041526870,"title":"MPU9250 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module","handle":"mpu9250","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThis module features the MPU-9250, which is a multi-chip module (MCM) consisting of two dies integrated into a single QFN package. One die houses the 3-Axis gyroscope and the 3-Axis accelerometer. The other die houses the AK8963 3-Axis magnetometer. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHence, the MPU-9250 is a 9-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer, and a Digital Motion Processor (DMP). The MPU-9250 also features an embedded temperature sensor. This module includes pull-up resistors on the SDA, SCL, and nCS lines, pull-down resistors on the FSYNC and AD0 lines, and an on-board 3.3V voltage regulator allowing you to power the module from 5V sources such as an Arduino. If you desire to power the module from 3.3V you can bridge the solder jumper next to the voltage regulator to bypass the regulator.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e* On-board pull-up resistors on SDA, SCL, and nCS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* On-board pull-down resistors on FSYNC and AD0\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* 3-Axis Accelerometer\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Range: up to ± 16 g\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Sensitivity: up to 16,384 LSB\/g\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* 3-Axis Gyroscope\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Range: up to ± 2000 deg\/sec\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Sensitivity: up to 131 LSB\/deg\/sec\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* 3-Axis Magnetometer\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Range: ± 4800 μT\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Sensitivity: 0.6 μT\/LSB\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Supply Voltage: 4.4 to 6.5 V or 3.3V if you solder the solder jumper near the on-board voltage regulator\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Interface: I2C\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* 2C Address: 0x68 by default, 0x69 if AD0 is pulled high\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Board Dimensions: 25.5mm (1.004\") long x 15.4mm (0.606\") wide, 3mm (0.118\") inside diameter of mounting holes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Weight: 2.72g (0.096oz)\u003c\/span\u003e\u003c\/p\u003e\n\u003col data-mce-fragment=\"1\"\u003e\u003c\/ol\u003e","published_at":"2022-12-06T11:08:34+05:30","created_at":"2021-09-20T20:07:03+05:30","vendor":"ThinkRobotics","type":"Sensor","tags":["3 axis","Acceleration","Accelerometer","Accelerometer module","arduino sensor","ELC1","Gyro","Gyroscope","Gyroscope Balance","gyroscope sensor","High precision IMU","I2C","IIC","IMU","IMU-BRD","Inertial","magnetic","magnetic sensor","Magnetometer","sensor","three axis","triple-axis accelerometer","ZOHO UPDATED"],"price":41999,"price_min":41999,"price_max":41999,"available":false,"price_varies":false,"compare_at_price":59999,"compare_at_price_min":59999,"compare_at_price_max":59999,"compare_at_price_varies":false,"variants":[{"id":39546580336726,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ELC1109","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"MPU9250 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module","public_title":null,"options":["Default Title"],"price":41999,"weight":20,"compare_at_price":59999,"inventory_management":"shopify","barcode":"ELC1109","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/H5a57344fe95e4ddf924e0c93c9c8e1d1j.jpg?v=1632149395","\/\/thinkrobotics.com\/cdn\/shop\/products\/Hb1b826ca959c4685a259fc0226bf01b9u.jpg?v=1632149395","\/\/thinkrobotics.com\/cdn\/shop\/products\/Hcfc9d03fa9c646adb01177cf44f1d84by.jpg?v=1632149395"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/H5a57344fe95e4ddf924e0c93c9c8e1d1j.jpg?v=1632149395","options":["Title"],"media":[{"alt":null,"id":21313192198230,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/H5a57344fe95e4ddf924e0c93c9c8e1d1j.jpg?v=1632149395"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/H5a57344fe95e4ddf924e0c93c9c8e1d1j.jpg?v=1632149395","width":1000},{"alt":null,"id":21313192099926,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/Hb1b826ca959c4685a259fc0226bf01b9u.jpg?v=1632149395"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/Hb1b826ca959c4685a259fc0226bf01b9u.jpg?v=1632149395","width":1000},{"alt":null,"id":21313192165462,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/Hcfc9d03fa9c646adb01177cf44f1d84by.jpg?v=1632149395"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/Hcfc9d03fa9c646adb01177cf44f1d84by.jpg?v=1632149395","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThis module features the MPU-9250, which is a multi-chip module (MCM) consisting of two dies integrated into a single QFN package. One die houses the 3-Axis gyroscope and the 3-Axis accelerometer. The other die houses the AK8963 3-Axis magnetometer. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHence, the MPU-9250 is a 9-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer, and a Digital Motion Processor (DMP). The MPU-9250 also features an embedded temperature sensor. This module includes pull-up resistors on the SDA, SCL, and nCS lines, pull-down resistors on the FSYNC and AD0 lines, and an on-board 3.3V voltage regulator allowing you to power the module from 5V sources such as an Arduino. If you desire to power the module from 3.3V you can bridge the solder jumper next to the voltage regulator to bypass the regulator.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e* On-board pull-up resistors on SDA, SCL, and nCS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* On-board pull-down resistors on FSYNC and AD0\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* 3-Axis Accelerometer\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Range: up to ± 16 g\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Sensitivity: up to 16,384 LSB\/g\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* 3-Axis Gyroscope\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Range: up to ± 2000 deg\/sec\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Sensitivity: up to 131 LSB\/deg\/sec\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* 3-Axis Magnetometer\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Range: ± 4800 μT\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Sensitivity: 0.6 μT\/LSB\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Supply Voltage: 4.4 to 6.5 V or 3.3V if you solder the solder jumper near the on-board voltage regulator\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Interface: I2C\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* 2C Address: 0x68 by default, 0x69 if AD0 is pulled high\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Board Dimensions: 25.5mm (1.004\") long x 15.4mm (0.606\") wide, 3mm (0.118\") inside diameter of mounting holes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Weight: 2.72g (0.096oz)\u003c\/span\u003e\u003c\/p\u003e\n\u003col data-mce-fragment=\"1\"\u003e\u003c\/ol\u003e"}
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
Team is suppotive and solves all the queries .
The product is good and will surely help me in my project...looking forward for more trades with think robotics.
