Magigoo Pro adhesives are designed for professional use to work exclusively with engineering filaments. These adhesives for professional use make sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools and the glue residue should also be easily cleaned off.
CONTENT:
Magigoo Pro PA is designedfor professional use, to work exclusively with Polyamide filaments. Designed and tested to work with different PA (nylon) and fiber-reinforced filament brands.
Magigoo Pro PC is designed to work exclusively with polycarbonate type filaments and fiber-reinforced variations.
Magigoo Pro-PP is designed to work exclusively with polypropylene filaments
Magigoo Original is designed to work with a variety of filaments including most PLA, ABS, HIPS, PETG, TPU types of filaments.
HOW:
Shakethe bottle.
Applyto the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.
Printaccording to the filament/printer manufacturers’ recommendations
Allow to cool and Remove. The print should pop right off
Cleanusing a damp cloth (with water) to wipe off.
Safety & Tips
SAFETY:
These products are for professional use. Please read the instructions carefully before use.
Using this product with other than designated type filaments might cause over adhesion and damage your build surface.
Some products may have corrosive and eye irritation substances. Wash your hands after use. Ideally use rubber gloves. Read Safety Data Sheets or consult with the manufacturer if necessary.
The bottle applicator has a spring valve inside. In order to activate it, press the nib against the build plate firmly. When pressing bottle sides, make sure the applicator is not going to pop out.
TIPS:
For larger prints, a 20 mm brim is recommended
In cases of excess adhesion, it is recommended to wet the print bed with a small amount of water slowly working it below the part, this should make part removal easier.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Shopping Cart
Logging you in
{"id":6613856845910,"title":"Magigoo Pro Kit","handle":"magigoo-pro-kit-3d-printing","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eMagigoo Pro adhesives are designed for professional use to work exclusively with engineering filaments. These adhesives \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003efor professional use \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003emake sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools and the glue residue should also be easily cleaned off.\u003c\/span\u003e\u003c\/p\u003e\n\u003cstrong\u003eCONTENT:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eMagigoo Pro PA is designed\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003efor professional use, \u003c\/span\u003eto work exclusively with Polyamide filaments. Designed and tested to work with different PA (nylon) and fiber-reinforced filament brands.\u003c\/li\u003e\n\u003cli\u003eMagigoo Pro PC is designed to work exclusively with polycarbonate type filaments and fiber-reinforced variations.\u003c\/li\u003e\n\u003cli\u003eMagigoo Pro-PP is designed to work exclusively with polypropylene filaments\u003c\/li\u003e\n\u003cli\u003eMagigoo Original is designed to work with a variety of filaments including most PLA, ABS, HIPS, PETG, TPU types of filaments. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHOW:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe bottle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eaccording to the filament\/printer manufacturers’ recommendations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow to cool and Remove\u003c\/strong\u003e. The print should pop right off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eusing a damp cloth (with water) to wipe off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003e Safety \u0026amp; Tips\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSAFETY:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese products are for professional use. Please read the instructions carefully before use.\u003c\/p\u003e\n\u003cp\u003eUsing this product with other than designated type filaments might cause over adhesion and damage your build surface.\u003c\/p\u003e\n\u003cp\u003e Some products may have corrosive and eye irritation substances. Wash your hands after use. Ideally use rubber gloves. Read Safety Data Sheets or consult with the manufacturer if necessary.\u003c\/p\u003e\n\u003cp\u003eThe bottle applicator has a spring valve inside. In order to activate it, press the nib against the build plate firmly. When pressing bottle sides, make sure the applicator is not going to pop out. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTIPS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor larger prints, a 20 mm brim is recommended\u003c\/p\u003e\n\u003cp\u003eIn cases of excess adhesion, it is recommended to wet the print bed with a small amount of water slowly working it below the part, this should make part removal easier.\u003c\/p\u003e","published_at":"2022-12-06T11:12:38+05:30","created_at":"2021-08-07T13:15:55+05:30","vendor":"ThinkRobotics","type":"3D Printer Products","tags":["3D Printed","3D Printed Product","3D Printed Products","3D Printer","3d printer filament","3d printer glue","3D printing","3d printing adhesive","3d printing glue","3D-GLUE","3D9","Adhesive","ASA","ASA Glue","glassfiber nylon","goo","HIPS","HIPS glue","magic","magic goo","Magigoo","MAGOO","nylon","nylon filament","nylon glue","PC","PETG","PETG filament","PETG glue","Polycarbonate","polycarbonate glue","Polypropylene","PP","printer glue","pro"],"price":629999,"price_min":629999,"price_max":629999,"available":true,"price_varies":false,"compare_at_price":799999,"compare_at_price_min":799999,"compare_at_price_max":799999,"compare_at_price_varies":false,"variants":[{"id":39497522839638,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3D9001-PR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Magigoo Pro Kit","public_title":null,"options":["Default Title"],"price":629999,"weight":350,"compare_at_price":799999,"inventory_management":"shopify","barcode":"39497522839638","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PROKit-1.jpg?v=1633279144","\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PROKit-2.jpg?v=1633279144","\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PROKit-3.jpg?v=1633279144","\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PROKit-4.jpg?v=1633279144"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PROKit-1.jpg?v=1633279144","options":["Title"],"media":[{"alt":"Magigoo Pro Kit ","id":21368416370774,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PROKit-1.jpg?v=1633279144"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PROKit-1.jpg?v=1633279144","width":1000},{"alt":"Magigoo Pro Kit ","id":21368416403542,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PROKit-2.jpg?v=1633279144"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PROKit-2.jpg?v=1633279144","width":1000},{"alt":"Magigoo Pro Kit ","id":21368416436310,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PROKit-3.jpg?v=1633279144"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PROKit-3.jpg?v=1633279144","width":1000},{"alt":"Magigoo Pro Kit ","id":21368416469078,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PROKit-4.jpg?v=1633279144"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PROKit-4.jpg?v=1633279144","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eMagigoo Pro adhesives are designed for professional use to work exclusively with engineering filaments. These adhesives \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003efor professional use \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003emake sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools and the glue residue should also be easily cleaned off.\u003c\/span\u003e\u003c\/p\u003e\n\u003cstrong\u003eCONTENT:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eMagigoo Pro PA is designed\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003efor professional use, \u003c\/span\u003eto work exclusively with Polyamide filaments. Designed and tested to work with different PA (nylon) and fiber-reinforced filament brands.\u003c\/li\u003e\n\u003cli\u003eMagigoo Pro PC is designed to work exclusively with polycarbonate type filaments and fiber-reinforced variations.\u003c\/li\u003e\n\u003cli\u003eMagigoo Pro-PP is designed to work exclusively with polypropylene filaments\u003c\/li\u003e\n\u003cli\u003eMagigoo Original is designed to work with a variety of filaments including most PLA, ABS, HIPS, PETG, TPU types of filaments. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHOW:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe bottle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eaccording to the filament\/printer manufacturers’ recommendations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow to cool and Remove\u003c\/strong\u003e. The print should pop right off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eusing a damp cloth (with water) to wipe off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003e Safety \u0026amp; Tips\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSAFETY:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese products are for professional use. Please read the instructions carefully before use.\u003c\/p\u003e\n\u003cp\u003eUsing this product with other than designated type filaments might cause over adhesion and damage your build surface.\u003c\/p\u003e\n\u003cp\u003e Some products may have corrosive and eye irritation substances. Wash your hands after use. Ideally use rubber gloves. Read Safety Data Sheets or consult with the manufacturer if necessary.\u003c\/p\u003e\n\u003cp\u003eThe bottle applicator has a spring valve inside. In order to activate it, press the nib against the build plate firmly. When pressing bottle sides, make sure the applicator is not going to pop out. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTIPS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor larger prints, a 20 mm brim is recommended\u003c\/p\u003e\n\u003cp\u003eIn cases of excess adhesion, it is recommended to wet the print bed with a small amount of water slowly working it below the part, this should make part removal easier.\u003c\/p\u003e"}
