Bondtech high-resolution extruder upgrade for the Prusa Mini enabled with Dual Drive Technology.
Upgrade Your Prusa Mini or Mini+
Upgrade your Prusa Mini with a Bondtech Dual Drive extruder designed to seamlessly fit the original setup.
Hardened Drive Gears
Allows to use abrasive materials that would wear out the gears of your original feeder otherwise.
Print Faster Or With Higher Quality
This bowden extruder will allow your 3D printer to print faster or to achieve even better surface quality.
Adjustable tension
The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament. This gives you the power to adjust according to your preferences and to optimize for the type of material you are using.
Quick-Release
To be able to do material changes in a snap, simply activate the Quick-Release lever to release the tension and pull the material to be changed out of the extruder, keep it activated and insert the new material.
More choice of materials
The hardened steel Dual Drive gears allow you to work with common and abrasive materials.
Included in this Kit
1x Bondtech extruder for Prusa Mini
3x Black nylon zip-ties
4x M3x35 black oxide steel screws
1x M3x12 black oxide steel screw
1x Brass motor gear
1x Thumb Screw assembly
Community Sourced Design
This extruder design was proposed to us by Olof Ogland. It’s based on the thoroughly tested BMG (Bondtech Mini Geared) and adjusted to the Prusa Mini original design.
Product Info
EAN Code: 7350011411054 Net weight : 102.3g Gearing ratio : 3:1 E-steps value : 415 Extruder Housing: SLS Printed parts in PA12; Hinge: injection molded.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Shopping Cart
Logging you in
{"id":6642158141526,"title":"Bondtech Upgrade Kit for Prusa Mini or Mini+","handle":"bondtech-upgrade-kit-for-prusa-mini-or-mini","description":"\u003cp data-mce-fragment=\"1\"\u003eBondtech high-resolution extruder upgrade for the Prusa Mini enabled with Dual Drive Technology.\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eUpgrade Your Prusa Mini or Mini+\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUpgrade your Prusa Mini with a Bondtech Dual Drive extruder designed to seamlessly fit the original setup.\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eHardened Drive Gears\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAllows to use abrasive materials that would wear out the gears of your original feeder otherwise.\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003ePrint Faster Or With Higher Quality\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis bowden extruder will allow your 3D printer to print faster or to achieve even better surface quality.\u003c\/p\u003e\n\u003ch4\u003eAdjustable tension\u003c\/h4\u003e\n\u003cp\u003eThe thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament. This gives you the power to adjust according to your preferences and to optimize for the type of material you are using.\u003c\/p\u003e\n\u003ch4\u003eQuick-Release\u003c\/h4\u003e\n\u003cp\u003eTo be able to do material changes in a snap, simply activate the Quick-Release lever to release the tension and pull the material to be changed out of the extruder, keep it activated and insert the new material.\u003c\/p\u003e\n\u003ch4\u003eMore choice of materials\u003c\/h4\u003e\n\u003cp\u003eThe hardened steel Dual Drive gears allow you to work with common and abrasive materials.\u003c\/p\u003e\n\u003ch4\u003eIncluded in this Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x Bondtech extruder for Prusa Mini\u003c\/li\u003e\n\u003cli\u003e3x Black nylon zip-ties\u003c\/li\u003e\n\u003cli\u003e4x M3x35 black oxide steel screws\u003c\/li\u003e\n\u003cli\u003e1x M3x12 black oxide steel screw\u003c\/li\u003e\n\u003cli\u003e1x Brass motor gear\u003c\/li\u003e\n\u003cli\u003e1x Thumb Screw assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCommunity Sourced Design\u003c\/h4\u003e\n\u003cp\u003eThis extruder design was proposed to us by \u003ca href=\"https:\/\/www.olofogland.se\/\" title=\"Olof Ogland's webpage\" target=\"_new\"\u003e\u003cb\u003e\u003cu\u003eOlof Ogland\u003c\/u\u003e\u003c\/b\u003e\u003c\/a\u003e. It’s based on the thoroughly tested BMG (Bondtech Mini Geared) and adjusted to the Prusa Mini original design.\u003c\/p\u003e\n\u003ch4\u003eProduct Info\u003c\/h4\u003e\n\u003cp\u003eEAN Code: 7350011411054\u003cbr\u003eNet weight : 102.3g\u003cbr\u003eGearing ratio : 3:1\u003cbr\u003eE-steps value : 415\u003cbr\u003eExtruder Housing: SLS Printed parts in PA12;\u003cbr\u003eHinge: injection molded.\u003c\/p\u003e\n\u003cp\u003eInstallations instructions can be found \u003ca href=\"https:\/\/support.bondtech.se\/Guide\/01.+Feeder+Upgrade+Kit\/59\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","published_at":"2022-12-06T11:08:08+05:30","created_at":"2021-10-10T21:55:04+05:30","vendor":"ThinkRobotics.in","type":"3D Printer Products","tags":["3D-UPGRD","3D6","BMG Based","BNTC","bondtech","bondtech extruder upgrade","Bondtech mini geared","Mini","Prusa","Prusa Mini","Upgrade Kit"],"price":689999,"price_min":689999,"price_max":689999,"available":true,"price_varies":false,"compare_at_price":999999,"compare_at_price_min":999999,"compare_at_price_max":999999,"compare_at_price_varies":false,"variants":[{"id":39571182125142,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3D6003","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bondtech Upgrade Kit for Prusa Mini or Mini+","public_title":null,"options":["Default Title"],"price":689999,"weight":400,"compare_at_price":999999,"inventory_management":"shopify","barcode":"39571182125142","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/PrusaMini-0887-1200x1200.jpg?v=1633883360","\/\/thinkrobotics.com\/cdn\/shop\/products\/PrusaMini-0888-1200x800.jpg?v=1633883359","\/\/thinkrobotics.com\/cdn\/shop\/products\/PrusaMini-0893.jpg?v=1633883360","\/\/thinkrobotics.com\/cdn\/shop\/products\/PrusaMini-0886-1200x1200.jpg?v=1633883360","\/\/thinkrobotics.com\/cdn\/shop\/products\/UpgradeKitForPrusa-0924-1200x800.jpg?v=1633883409"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/PrusaMini-0887-1200x1200.jpg?v=1633883360","options":["Title"],"media":[{"alt":"Bondtech Upgrade Kit For Prusa Mini Or Mini+","id":21402915045462,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/PrusaMini-0887-1200x1200.jpg?v=1633883360"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/PrusaMini-0887-1200x1200.jpg?v=1633883360","width":1200},{"alt":"Bondtech Upgrade Kit For Prusa Mini Or Mini+","id":21402914947158,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/PrusaMini-0888-1200x800.jpg?v=1633883359"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/PrusaMini-0888-1200x800.jpg?v=1633883359","width":800},{"alt":"Bondtech Upgrade Kit For Prusa Mini Or Mini+","id":21402914979926,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/PrusaMini-0893.jpg?v=1633883360"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/PrusaMini-0893.jpg?v=1633883360","width":1000},{"alt":"Bondtech Upgrade Kit For Prusa Mini Or Mini+","id":21402915012694,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/PrusaMini-0886-1200x1200.jpg?v=1633883360"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/PrusaMini-0886-1200x1200.jpg?v=1633883360","width":1200},{"alt":"Bondtech Upgrade Kit For Prusa Mini Or Mini+","id":21402918158422,"position":5,"preview_image":{"aspect_ratio":1.0,"height":787,"width":787,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/UpgradeKitForPrusa-0924-1200x800.jpg?v=1633883409"},"aspect_ratio":1.0,"height":787,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/UpgradeKitForPrusa-0924-1200x800.jpg?v=1633883409","width":787}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003eBondtech high-resolution extruder upgrade for the Prusa Mini enabled with Dual Drive Technology.\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eUpgrade Your Prusa Mini or Mini+\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUpgrade your Prusa Mini with a Bondtech Dual Drive extruder designed to seamlessly fit the original setup.\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eHardened Drive Gears\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAllows to use abrasive materials that would wear out the gears of your original feeder otherwise.\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003ePrint Faster Or With Higher Quality\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis bowden extruder will allow your 3D printer to print faster or to achieve even better surface quality.\u003c\/p\u003e\n\u003ch4\u003eAdjustable tension\u003c\/h4\u003e\n\u003cp\u003eThe thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament. This gives you the power to adjust according to your preferences and to optimize for the type of material you are using.\u003c\/p\u003e\n\u003ch4\u003eQuick-Release\u003c\/h4\u003e\n\u003cp\u003eTo be able to do material changes in a snap, simply activate the Quick-Release lever to release the tension and pull the material to be changed out of the extruder, keep it activated and insert the new material.\u003c\/p\u003e\n\u003ch4\u003eMore choice of materials\u003c\/h4\u003e\n\u003cp\u003eThe hardened steel Dual Drive gears allow you to work with common and abrasive materials.\u003c\/p\u003e\n\u003ch4\u003eIncluded in this Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x Bondtech extruder for Prusa Mini\u003c\/li\u003e\n\u003cli\u003e3x Black nylon zip-ties\u003c\/li\u003e\n\u003cli\u003e4x M3x35 black oxide steel screws\u003c\/li\u003e\n\u003cli\u003e1x M3x12 black oxide steel screw\u003c\/li\u003e\n\u003cli\u003e1x Brass motor gear\u003c\/li\u003e\n\u003cli\u003e1x Thumb Screw assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCommunity Sourced Design\u003c\/h4\u003e\n\u003cp\u003eThis extruder design was proposed to us by \u003ca href=\"https:\/\/www.olofogland.se\/\" title=\"Olof Ogland's webpage\" target=\"_new\"\u003e\u003cb\u003e\u003cu\u003eOlof Ogland\u003c\/u\u003e\u003c\/b\u003e\u003c\/a\u003e. It’s based on the thoroughly tested BMG (Bondtech Mini Geared) and adjusted to the Prusa Mini original design.\u003c\/p\u003e\n\u003ch4\u003eProduct Info\u003c\/h4\u003e\n\u003cp\u003eEAN Code: 7350011411054\u003cbr\u003eNet weight : 102.3g\u003cbr\u003eGearing ratio : 3:1\u003cbr\u003eE-steps value : 415\u003cbr\u003eExtruder Housing: SLS Printed parts in PA12;\u003cbr\u003eHinge: injection molded.\u003c\/p\u003e\n\u003cp\u003eInstallations instructions can be found \u003ca href=\"https:\/\/support.bondtech.se\/Guide\/01.+Feeder+Upgrade+Kit\/59\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e"}
