This is a dual Gigabit ethernet 5G/4G base board from Waveshare, designed for the Raspberry Pi Compute Module 4 (not included).
This base board's main features are the dual-Gigabit Ethernet ports, allowing you to evaluate the CM4 as a controller for a custom router project. You'll need to compile your own software for this with very limited information from the manufacturer, so this is not intended for novice users!
There's also a slot for an SIM7000G-H M.2 B-Key 4G/5G module (not included) allowing the addition of LTE functionality for your project. Alongside this is a nano sim card slot option 5G/4G/3G/2G connectivity as well.
The board also features 2x USB 3.2 ports, an RTC and backup battery holder, fan header, 2x CSI and 1x DSI ports, 2 full-size HDMI ports and a Micro-SD card slot!
Base board only. Does not include the CM4, power supply or M.2 B-Key module. This allows you to choose your wireless and power options separately.
What's On-Board?
1) CM4 socket - suitable for all variants of Compute Module 4 2) 40-Pin GPIO header - For connecting sorts of HATs 3) Dual RJ45 Gigabit Ethernet - 10/100/1000M compatible - ETHERNET 0: CM4 original ETH - ETHERNET 1: USB extended ETH 4) HDMI connectors - 2x HDMI, supports 4K 30fps output 5) USB 3.2 ports - 2x USB 3.2 Gen1, for connecting sorts of USB devices 6) PWR & USB - DC power supply or USB programming port 7) Fan header - For connecting cooling fan, allows speed adjustment and measurement 8) Camera Port - 2x MIPI CSI camera ports 9) 4G/5G module status indicator - STA red: module enable indicator - NET green: module operating status indicator 10) CM4 status indicator - PWR red: Raspberry Pi power indicator - ACT green: Raspberry Pi operating status indicator 11) BOOT selection - ON: CM4 will be booted from USB-C interface - OFF: CM4 will be booted from eMMC or Micro SD card 12) Display Port - MIPI DSI display port 13) M.2 B KEY - Supports 4G/5G modules, or other communication modules using USB channel 14) Nano-SIM card slot - Supports standard Nano-SIM card for 5G/4G/3G/2G communication 15) Micro SD card slot - For connecting a Micro SD card with pre-burnt image (Lite variant ONLY) 16) RTC battery holder - Supports CR2032 button cell 17) RTC interruption configuration - PI-RUN: CM4 will reboot on RTC interruption - GL-EN: CM4 powerdown on RTC interruption - D4: D4 pin is triggered on RTC interruption (default) 18) IO-VREF selection - Set the CM4 IO logic level as 3.3V (default) or 1.8V 19) Fan power supply selection - Select 12V (default) or 5V power to drive the fan 20) RTC/FAN I2C bus selection - SDA0/SCL0: I2C-10 is shared with CSI/DSI (default) - GPIO3/2: I2C-1 is shared with 40-pin header 21) System function configuration - BT_DIS: Bluetooth disabled, for CM4 with antenna variant ONLY - WiFi_DIS: WiFi disabled, for CM4 with antenna variant ONLY - WP_DIS: boot mode switch, ONLY be used when NOT booted from eMMC or SD card 22) RTL8153 - USB Gigabit Ethernet chip
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Shopping Cart
Logging you in
{"id":6733673431126,"title":"Dual Gigabit Ethernet 5G\/4G Base Board","handle":"dual-gigabit-ethernet-5g-4g-base-board-online","description":"\u003cp\u003eThis is a dual Gigabit ethernet 5G\/4G base board from Waveshare, designed for the Raspberry Pi Compute Module 4 (not included).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis base board's main features are the dual-Gigabit Ethernet ports, allowing you to evaluate the CM4 as a controller for a custom router project. You'll need to compile your own software for this with very limited information from the manufacturer, so this is not intended for novice users!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThere's also a slot for an \u003ca href=\"https:\/\/thinkrobotics.in\/products\/sim7600g-h-m-2-simcom-original-4g-lte-cat-4-module\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSIM7000G-H\u003c\/a\u003e M.2 B-Key 4G\/5G module (not included) allowing the addition of LTE functionality for your project. Alongside this is a nano sim card slot option 5G\/4G\/3G\/2G connectivity as well.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe board also features 2x USB 3.2 ports, an RTC and backup battery holder, fan header, 2x CSI and 1x DSI ports, 2 full-size HDMI ports and a Micro-SD card slot!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eBase board only. Does not include the CM4, power supply or M.2 B-Key module. This allows you to choose your wireless and power options separately.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-5.jpg?v=1648907246\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-7.jpg?v=1648907272\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-3.jpg?v=1648907386\"\u003e\u003c\/div\u003e\n\u003ch2 style=\"text-align: center;\"\u003eWhat's On-Board?\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-intro.jpg?v=1648907445\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cstrong\u003e1) CM4 socket\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - suitable for all variants of Compute Module 4\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e2) 40-Pin GPIO header\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - For connecting sorts of HATs\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e3) Dual RJ45 Gigabit Ethernet\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - 10\/100\/1000M compatible\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - ETHERNET 0: CM4 original ETH\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - ETHERNET 1: USB extended ETH\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e4) HDMI connectors\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - 2x HDMI, supports 4K 30fps output\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e5) USB 3.2 ports\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - 2x USB 3.2 Gen1, for connecting sorts of USB devices\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e6) PWR \u0026amp; USB\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - DC power supply or USB programming port\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e7) Fan header\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - For connecting cooling fan, allows speed adjustment and measurement\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e8) Camera Port\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - 2x MIPI CSI camera ports\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e9) 4G\/5G module status indicator\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - STA red: module enable indicator\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - NET green: module operating status indicator\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e10) CM4 status indicator\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - PWR red: Raspberry Pi power indicator\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - ACT green: Raspberry Pi operating status indicator\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e11) BOOT selection\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - ON: CM4 will be booted from USB-C interface\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - OFF: CM4 will be booted from eMMC or Micro SD card\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e12) Display Port\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - MIPI DSI display port\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e13) M.2 B KEY\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Supports 4G\/5G modules, or other communication modules using USB channel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e14) Nano-SIM card slot\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Supports standard Nano-SIM card for 5G\/4G\/3G\/2G communication\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e15) Micro SD card slot\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - For connecting a Micro SD card with pre-burnt image (Lite variant ONLY)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e16) RTC battery holder\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Supports CR2032 button cell\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e17) RTC interruption configuration\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - PI-RUN: CM4 will reboot on RTC interruption\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - GL-EN: CM4 powerdown on RTC interruption\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - D4: D4 pin is triggered on RTC interruption (default)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e18) IO-VREF selection\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Set the CM4 IO logic level as 3.3V (default) or 1.8V\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e19) Fan power supply selection\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Select 12V (default) or 5V power to drive the fan\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e20) RTC\/FAN I2C bus selection\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - SDA0\/SCL0: I2C-10 is shared with CSI\/DSI (default)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - GPIO3\/2: I2C-1 is shared with 40-pin header\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e21) System function configuration\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - BT_DIS: Bluetooth disabled, for CM4 with antenna variant ONLY\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - WiFi_DIS: WiFi disabled, for CM4 with antenna variant ONLY\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - WP_DIS: boot mode switch, ONLY be used when NOT booted from eMMC or SD card\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e22) RTL8153\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - USB Gigabit Ethernet chip\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-size.jpg?v=1648907767\"\u003e\u003c\/div\u003e","published_at":"2022-12-06T11:04:03+05:30","created_at":"2022-04-02T19:04:54+05:30","vendor":"Waveshare","type":"Single Board Computers","tags":["20885","B-Key","CM4","compute","compute module storage","dual","ethernet","Gigabit","M.2","raspberry","Raspberry Pi","raspberry pi 4","Raspberry pi 4 1GB","Raspberry pi 4 2GB","Raspberry pi 4 8GB","raspberry pi kit","RPI-BRDS","RPIACC","SBC2","WaveSH","WAVESHARE","WVSH"],"price":499999,"price_min":499999,"price_max":499999,"available":true,"price_varies":false,"compare_at_price":899999,"compare_at_price_min":899999,"compare_at_price_max":899999,"compare_at_price_varies":false,"variants":[{"id":39783133413462,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SBC2056","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dual Gigabit Ethernet 5G\/4G Base Board","public_title":null,"options":["Default Title"],"price":499999,"weight":70,"compare_at_price":899999,"inventory_management":"shopify","barcode":"39783133413462","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113546064067_1200x_jpg.webp?v=1648907198","\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113552650435_800x_jpg.webp?v=1648907198","\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113549078723_1200x_jpg.webp?v=1648907198","\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113547112643_1200x_jpg.webp?v=1648907198"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113546064067_1200x_jpg.webp?v=1648907198","options":["Title"],"media":[{"alt":"Dual Gigabit Ethernet 5G\/4G Base Board Online","id":22237101785174,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113546064067_1200x_jpg.webp?v=1648907198"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113546064067_1200x_jpg.webp?v=1648907198","width":1200},{"alt":"Dual Gigabit Ethernet 5G\/4G Base Board Online","id":22237101686870,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113552650435_800x_jpg.webp?v=1648907198"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113552650435_800x_jpg.webp?v=1648907198","width":800},{"alt":"Dual Gigabit Ethernet 5G\/4G Base Board Online","id":22237101719638,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113549078723_1200x_jpg.webp?v=1648907198"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113549078723_1200x_jpg.webp?v=1648907198","width":1200},{"alt":"Dual Gigabit Ethernet 5G\/4G Base Board Online","id":22237101752406,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113547112643_1200x_jpg.webp?v=1648907198"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113547112643_1200x_jpg.webp?v=1648907198","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis is a dual Gigabit ethernet 5G\/4G base board from Waveshare, designed for the Raspberry Pi Compute Module 4 (not included).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis base board's main features are the dual-Gigabit Ethernet ports, allowing you to evaluate the CM4 as a controller for a custom router project. You'll need to compile your own software for this with very limited information from the manufacturer, so this is not intended for novice users!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThere's also a slot for an \u003ca href=\"https:\/\/thinkrobotics.in\/products\/sim7600g-h-m-2-simcom-original-4g-lte-cat-4-module\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSIM7000G-H\u003c\/a\u003e M.2 B-Key 4G\/5G module (not included) allowing the addition of LTE functionality for your project. Alongside this is a nano sim card slot option 5G\/4G\/3G\/2G connectivity as well.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe board also features 2x USB 3.2 ports, an RTC and backup battery holder, fan header, 2x CSI and 1x DSI ports, 2 full-size HDMI ports and a Micro-SD card slot!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eBase board only. Does not include the CM4, power supply or M.2 B-Key module. This allows you to choose your wireless and power options separately.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-5.jpg?v=1648907246\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-7.jpg?v=1648907272\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-3.jpg?v=1648907386\"\u003e\u003c\/div\u003e\n\u003ch2 style=\"text-align: center;\"\u003eWhat's On-Board?\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-intro.jpg?v=1648907445\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cstrong\u003e1) CM4 socket\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - suitable for all variants of Compute Module 4\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e2) 40-Pin GPIO header\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - For connecting sorts of HATs\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e3) Dual RJ45 Gigabit Ethernet\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - 10\/100\/1000M compatible\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - ETHERNET 0: CM4 original ETH\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - ETHERNET 1: USB extended ETH\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e4) HDMI connectors\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - 2x HDMI, supports 4K 30fps output\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e5) USB 3.2 ports\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - 2x USB 3.2 Gen1, for connecting sorts of USB devices\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e6) PWR \u0026amp; USB\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - DC power supply or USB programming port\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e7) Fan header\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - For connecting cooling fan, allows speed adjustment and measurement\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e8) Camera Port\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - 2x MIPI CSI camera ports\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e9) 4G\/5G module status indicator\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - STA red: module enable indicator\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - NET green: module operating status indicator\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e10) CM4 status indicator\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - PWR red: Raspberry Pi power indicator\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - ACT green: Raspberry Pi operating status indicator\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e11) BOOT selection\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - ON: CM4 will be booted from USB-C interface\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - OFF: CM4 will be booted from eMMC or Micro SD card\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e12) Display Port\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - MIPI DSI display port\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e13) M.2 B KEY\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Supports 4G\/5G modules, or other communication modules using USB channel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e14) Nano-SIM card slot\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Supports standard Nano-SIM card for 5G\/4G\/3G\/2G communication\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e15) Micro SD card slot\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - For connecting a Micro SD card with pre-burnt image (Lite variant ONLY)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e16) RTC battery holder\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Supports CR2032 button cell\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e17) RTC interruption configuration\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - PI-RUN: CM4 will reboot on RTC interruption\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - GL-EN: CM4 powerdown on RTC interruption\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - D4: D4 pin is triggered on RTC interruption (default)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e18) IO-VREF selection\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Set the CM4 IO logic level as 3.3V (default) or 1.8V\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e19) Fan power supply selection\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Select 12V (default) or 5V power to drive the fan\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e20) RTC\/FAN I2C bus selection\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - SDA0\/SCL0: I2C-10 is shared with CSI\/DSI (default)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - GPIO3\/2: I2C-1 is shared with 40-pin header\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e21) System function configuration\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - BT_DIS: Bluetooth disabled, for CM4 with antenna variant ONLY\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - WiFi_DIS: WiFi disabled, for CM4 with antenna variant ONLY\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - WP_DIS: boot mode switch, ONLY be used when NOT booted from eMMC or SD card\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e22) RTL8153\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - USB Gigabit Ethernet chip\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-size.jpg?v=1648907767\"\u003e\u003c\/div\u003e"}
