This is the 130-size DC motor used in the larger plastic gearmotors. It has a recommended operating voltage of 3 – 12 V; at 6 V, the no-load speed is about 11,500 RPM, the no-load current is approximately 70 mA, and the stall current is around 800 mA. For an estimate of the torque, note that the 228:1 plastic gearmotor produces roughly 100 oz-in of torque at 6 V using this motor, and the 120:1 plastic gearmotors produce roughly 75 oz-in of torque at 6 V. The output shaft has a diameter of 2 mm.
3D printed parts are of low finish. Lot.of sharp edges on parts. Also the fitment of the parts are not happening because of excess material. Most often the parts have to be filed or reworked. Screws are given in exact number as needed. If one screw is missed, then the assembly is impossible
The consignment was not dispatched as per committed date and had to pursue for dispatch information. The courier didn,t deliver us despit lying in Jaipur and we had to personally collect it from Courier Hub adding to inconvenience. The logistics need to be improved. Just a feedback.
{"id":1415834697800,"title":"130 Pony Micro DC Motor","handle":"130-pony-micro-dc-motor-3v-6v","description":"\u003cp\u003e\u003cspan\u003eThis is the 130-size DC motor used in the larger plastic gearmotors. It has a recommended operating voltage of 3 – 12 V; at 6 V, the no-load speed is about 11,500 RPM, the no-load current is approximately 70 mA, and the stall current is around 800 mA. For an estimate of the torque, note that the 228:1 plastic gearmotor produces roughly 100 oz-in of torque at 6 V using this motor, and the 120:1 plastic gearmotors produce roughly 75 oz-in of torque at 6 V. The output shaft has a diameter of 2 mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature: -10°C ~ +60°C\u003c\/li\u003e\n\u003cli\u003eRated Voltage: 6.0VDC\u003c\/li\u003e\n\u003cli\u003eRated Load: 10 g*cm\u003c\/li\u003e\n\u003cli\u003eNo-load Current: 70 mA max\u003c\/li\u003e\n\u003cli\u003eNo-load Speed: 9100 ±1800 rpm\u003c\/li\u003e\n\u003cli\u003eLoaded Current: 250 mA max\u003c\/li\u003e\n\u003cli\u003eLoaded Speed: 4500 ±1500 rpm\u003c\/li\u003e\n\u003cli\u003eStarting Torque: 20 g*cm\u003c\/li\u003e\n\u003cli\u003eStarting Voltage: 2.0\u003c\/li\u003e\n\u003cli\u003eStall Current: 500mA max\u003c\/li\u003e\n\u003cli\u003eBody Size: 27.5mm x 20mm x 15mm\u003c\/li\u003e\n\u003cli\u003eShaft Size: 8mm x 2mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: 17.5 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eTutorials\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/_L1XE6mWqqI\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e","published_at":"2022-12-06T11:28:25+05:30","created_at":"2018-08-31T15:15:33+05:30","vendor":"ThinkRobotics","type":"DC Motor","tags":["130 motor","130 pony motor","3V","6V","Brushed DC Motor","DC Motor","DC-MOT","DIY Toy","DIY Toy motor","F130-13180-38","micro motor","Micro Motors","MOT2","Pony motor","Small Motor","ZOHO UPDATED"],"price":4750,"price_min":4750,"price_max":4750,"available":false,"price_varies":false,"compare_at_price":14000,"compare_at_price_min":14000,"compare_at_price_max":14000,"compare_at_price_varies":false,"variants":[{"id":12739692757064,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MOT2001","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"130 Pony Micro DC Motor","public_title":null,"options":["Default Title"],"price":4750,"weight":20,"compare_at_price":14000,"inventory_management":"shopify","barcode":"MOT2001","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/20190626_111741.jpg?v=1592443443","\/\/thinkrobotics.com\/cdn\/shop\/products\/20190626_111750.jpg?v=1592443443","\/\/thinkrobotics.com\/cdn\/shop\/products\/20190626_111857.jpg?v=1592443444","\/\/thinkrobotics.com\/cdn\/shop\/products\/20190626_111956.jpg?v=1592443444"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190626_111741.jpg?v=1592443443","options":["Title"],"media":[{"alt":"130 Pony Micro DC Motor","id":7426047049814,"position":1,"preview_image":{"aspect_ratio":1.001,"height":1204,"width":1205,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190626_111741.jpg?v=1592443443"},"aspect_ratio":1.001,"height":1204,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190626_111741.jpg?v=1592443443","width":1205},{"alt":"130 Pony Micro DC Motor","id":7426047082582,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1296,"width":1296,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190626_111750.jpg?v=1592443443"},"aspect_ratio":1.0,"height":1296,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190626_111750.jpg?v=1592443443","width":1296},{"alt":"130 Pony Micro DC Motor","id":7426047115350,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190626_111857.jpg?v=1592443444"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190626_111857.jpg?v=1592443444","width":3024},{"alt":"130 Pony Micro DC Motor","id":7426047148118,"position":4,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190626_111956.jpg?v=1592443444"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190626_111956.jpg?v=1592443444","width":3024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThis is the 130-size DC motor used in the larger plastic gearmotors. It has a recommended operating voltage of 3 – 12 V; at 6 V, the no-load speed is about 11,500 RPM, the no-load current is approximately 70 mA, and the stall current is around 800 mA. For an estimate of the torque, note that the 228:1 plastic gearmotor produces roughly 100 oz-in of torque at 6 V using this motor, and the 120:1 plastic gearmotors produce roughly 75 oz-in of torque at 6 V. The output shaft has a diameter of 2 mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature: -10°C ~ +60°C\u003c\/li\u003e\n\u003cli\u003eRated Voltage: 6.0VDC\u003c\/li\u003e\n\u003cli\u003eRated Load: 10 g*cm\u003c\/li\u003e\n\u003cli\u003eNo-load Current: 70 mA max\u003c\/li\u003e\n\u003cli\u003eNo-load Speed: 9100 ±1800 rpm\u003c\/li\u003e\n\u003cli\u003eLoaded Current: 250 mA max\u003c\/li\u003e\n\u003cli\u003eLoaded Speed: 4500 ±1500 rpm\u003c\/li\u003e\n\u003cli\u003eStarting Torque: 20 g*cm\u003c\/li\u003e\n\u003cli\u003eStarting Voltage: 2.0\u003c\/li\u003e\n\u003cli\u003eStall Current: 500mA max\u003c\/li\u003e\n\u003cli\u003eBody Size: 27.5mm x 20mm x 15mm\u003c\/li\u003e\n\u003cli\u003eShaft Size: 8mm x 2mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: 17.5 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eTutorials\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/_L1XE6mWqqI\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e"}
