Discharge voltage: 1.00 V-15.00 V 0.01 V resolution
Termination voltage range: 0.5-11.0 V
Supported by current: 3.000A 0.001A resolution
Maximum voltage measurement error: 1% + 0.02 V
Maximum current measurement error: 1.5% + -0.008A
Maximum battery capacity range: 9999Ah (1Ah = 1000 mAh) greater value by moving the decimal point to pass, when the display is less than 10Ah X. XXX, as shown above to get 10Ah XX. XX, and so on.
The dimensions of the card: 50mm * 37mm
Final dimensions: 50 mm * 37 mm * 17 mm (length * width * height in maximum position, contains height of the copper foot)
Instruction:
The first test must be fully charged.
Connect the battery to be tested positive for positive input, a negative input for the negative, can not be reversed (with reversal load can damage the circuit)! Load connected to the output of the positive and negative output, to work with the micro USB power tester (not available desktop or laptop powered USB), then the battery voltage.
Direct boot test need only one press of the "OK" button, the tester can develop a proper battery charging voltage complete charging voltage, and starts flashing after the test three times. They need to develop artificial display status of the termination voltage only when the battery voltage by pressing the "+" or "" - "button to change the termination voltage display start with P, behind the representative voltage resolution of 0.1V , set up after pressing the "OK" start test button.
After the start of the test the tester will check the load of the electronic switch is turned on, the test data shows that the process will release capacity (Ah), current discharge current (A) and the battery voltage (V) between the wheel was. When the battery voltage reaches the cut-off voltage set, load control turns off the display data tester remains in capacity (Ah) and above and the corresponding indicator flashes quickly together, now displays the battery capacity is capacity discharge, about the press the "OK" button to finish flashing allows stable data display, Press the "OK" button again to return to the power state can simply replace the battery test the next section.
Error codes:
Err1: battery voltage is above 15 V
Err2: battery voltage is lower than the termination voltage
Err3: Battery cannot afford load or discharge line current too much resistance
{"id":4379312914518,"title":"ZB2L3 18650 Battery Capacity Tester 1.2V 12V - External Load Discharge","handle":"18650-li-ion-lithium-battery-capacity-tester-1-2v-12v","description":"\u003cdiv data-spm-anchor-id=\"a2g0o.detail.1000023.i1.67ed2662oF86Vg\"\u003eDetails:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eSupply voltage: DC4.5-6V (micro USB connector)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eOperating current: less than 70mA\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eDischarge voltage: 1.00 V-15.00 V 0.01 V resolution\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eTermination voltage range: 0.5-11.0 V\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eSupported by current: 3.000A 0.001A resolution\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eMaximum voltage measurement error: 1% + 0.02 V\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eMaximum current measurement error: 1.5% + -0.008A\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eMaximum battery capacity range: 9999Ah (1Ah = 1000 mAh) greater value by moving the decimal point to pass, when the display is less than 10Ah X. XXX, as shown above to get 10Ah XX. XX, and so on.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eThe dimensions of the card: 50mm * 37mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eFinal dimensions: 50 mm * 37 mm * 17 mm (length * width * height in maximum position, contains height of the copper foot)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003eInstruction:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eThe first test must be fully charged.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eConnect the battery to be tested positive for positive input, a negative input for the negative, can not be reversed (with reversal load can damage the circuit)! Load connected to the output of the positive and negative output, to work with the micro USB power tester (not available desktop or laptop powered USB), then the battery voltage.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eDirect boot test need only one press of the \"OK\" button, the tester can develop a proper battery charging voltage complete charging voltage, and starts flashing after the test three times. They need to develop artificial display status of the termination voltage only when the battery voltage by pressing the \"+\" or \"\" - \"button to change the termination voltage display start with P, behind the representative voltage resolution of 0.1V , set up after pressing the \"OK\" start test button.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eAfter the start of the test the tester will check the load of the electronic switch is turned on, the test data shows that the process will release capacity (Ah), current discharge current (A) and the battery voltage (V) between the wheel was. When the battery voltage reaches the cut-off voltage set, load control turns off the display data tester remains in capacity (Ah) and above and the corresponding indicator flashes quickly together, now displays the battery capacity is capacity discharge, about the press the \"OK\" button to finish flashing allows stable data display, Press the \"OK\" button again to return to the power state can simply replace the battery test the next section.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cspan\u003eError codes:\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cspan\u003eErr1: battery voltage is above 15 V\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cspan\u003eErr2: battery voltage is lower than the termination voltage\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cspan\u003eErr3: Battery cannot afford load or discharge line current too much resistance\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cspan\u003eErr4: overcurrent (current exceeds 3.1A)\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003ctable class=\"shop_attributes woocommerce-group-attributes-layout-2\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\"\u003ePower supply voltage (VDC)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003e4.5 ~ 6\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\"\u003eDischarge voltage\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003e1 ~ 15 VDC 0.01V resolution\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\"\u003eWorking current (mA)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003eless than 70\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\"\u003eMaximum voltage measurement error\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003e1% + 0.02V\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\"\u003eMaximum current measurement error\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003e1.5% ± 0.008A\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\"\u003eLength (mm)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003e50\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\"\u003eWidth (mm)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003e37\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\"\u003eHeight (mm)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003e16.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\"\u003eWeight (gm)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003e20\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\"\u003eShipment Weight\u003c\/td\u003e\n\u003ctd class=\"product_weight attribute_value\"\u003e\n\u003cp\u003e0.030 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"\"\u003e\n\u003ctd class=\"attribute_name\"\u003eShipment Dimensions\u003c\/td\u003e\n\u003ctd class=\"product_dimensions attribute_value\"\u003e\n\u003cp\u003e12 × 8 × 2 cm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/d70613e4-d150-4020-b53e-f1b6e43f1ae3_1.e9ce700c54a8c0f39c46259cfa496005_480x480.jpg?v=1593463207\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cspan\u003eTutorial\u003c\/span\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/v_RtSspY1Js\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/7SWExcGAnOQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e","published_at":"2022-12-06T11:18:30+05:30","created_at":"2019-11-16T13:18:05+05:30","vendor":"ThinkRobotics.in","type":"Miscellaneous Electronics","tags":["18650","18650 Battery","18650 Battery Capacity Tester","BATT-ACC","Battery Capacity Testor","Battery tester","ELC7","POWER-MOD"],"price":34999,"price_min":34999,"price_max":34999,"available":true,"price_varies":false,"compare_at_price":59599,"compare_at_price_min":59599,"compare_at_price_max":59599,"compare_at_price_varies":false,"variants":[{"id":31299309011030,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ELC7013","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ZB2L3 18650 Battery Capacity Tester 1.2V 12V - External Load Discharge","public_title":null,"options":["Default Title"],"price":34999,"weight":51,"compare_at_price":59599,"inventory_management":"shopify","barcode":"31299309011030","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/InkedHTB1fV8taULrK1Rjy0Fjq6zYXFXaI_LI.jpg?v=1577793962","\/\/thinkrobotics.com\/cdn\/shop\/products\/Inkedezgif.com-webp-to-jpg_LI.jpg?v=1577793962","\/\/thinkrobotics.com\/cdn\/shop\/products\/Inkedezgif.com-webp-to-jpg_1__LI.jpg?v=1577793962"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/InkedHTB1fV8taULrK1Rjy0Fjq6zYXFXaI_LI.jpg?v=1577793962","options":["Title"],"media":[{"alt":"ZB2L3 18650 Battery Capacity Tester","id":5704793587798,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/InkedHTB1fV8taULrK1Rjy0Fjq6zYXFXaI_LI.jpg?v=1577793962"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/InkedHTB1fV8taULrK1Rjy0Fjq6zYXFXaI_LI.jpg?v=1577793962","width":1000},{"alt":"ZB2L3 18650 Battery Capacity Tester","id":5704793620566,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/Inkedezgif.com-webp-to-jpg_LI.jpg?v=1577793962"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/Inkedezgif.com-webp-to-jpg_LI.jpg?v=1577793962","width":1000},{"alt":"ZB2L3 18650 Battery Capacity Tester","id":5704793653334,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/Inkedezgif.com-webp-to-jpg_1__LI.jpg?v=1577793962"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/Inkedezgif.com-webp-to-jpg_1__LI.jpg?v=1577793962","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv data-spm-anchor-id=\"a2g0o.detail.1000023.i1.67ed2662oF86Vg\"\u003eDetails:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eSupply voltage: DC4.5-6V (micro USB connector)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eOperating current: less than 70mA\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eDischarge voltage: 1.00 V-15.00 V 0.01 V resolution\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eTermination voltage range: 0.5-11.0 V\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eSupported by current: 3.000A 0.001A resolution\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eMaximum voltage measurement error: 1% + 0.02 V\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eMaximum current measurement error: 1.5% + -0.008A\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eMaximum battery capacity range: 9999Ah (1Ah = 1000 mAh) greater value by moving the decimal point to pass, when the display is less than 10Ah X. XXX, as shown above to get 10Ah XX. XX, and so on.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eThe dimensions of the card: 50mm * 37mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eFinal dimensions: 50 mm * 37 mm * 17 mm (length * width * height in maximum position, contains height of the copper foot)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003eInstruction:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eThe first test must be fully charged.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eConnect the battery to be tested positive for positive input, a negative input for the negative, can not be reversed (with reversal load can damage the circuit)! Load connected to the output of the positive and negative output, to work with the micro USB power tester (not available desktop or laptop powered USB), then the battery voltage.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eDirect boot test need only one press of the \"OK\" button, the tester can develop a proper battery charging voltage complete charging voltage, and starts flashing after the test three times. They need to develop artificial display status of the termination voltage only when the battery voltage by pressing the \"+\" or \"\" - \"button to change the termination voltage display start with P, behind the representative voltage resolution of 0.1V , set up after pressing the \"OK\" start test button.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eAfter the start of the test the tester will check the load of the electronic switch is turned on, the test data shows that the process will release capacity (Ah), current discharge current (A) and the battery voltage (V) between the wheel was. When the battery voltage reaches the cut-off voltage set, load control turns off the display data tester remains in capacity (Ah) and above and the corresponding indicator flashes quickly together, now displays the battery capacity is capacity discharge, about the press the \"OK\" button to finish flashing allows stable data display, Press the \"OK\" button again to return to the power state can simply replace the battery test the next section.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cspan\u003eError codes:\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cspan\u003eErr1: battery voltage is above 15 V\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cspan\u003eErr2: battery voltage is lower than the termination voltage\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cspan\u003eErr3: Battery cannot afford load or discharge line current too much resistance\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cspan\u003eErr4: overcurrent (current exceeds 3.1A)\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003ctable class=\"shop_attributes woocommerce-group-attributes-layout-2\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\"\u003ePower supply voltage (VDC)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003e4.5 ~ 6\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\"\u003eDischarge voltage\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003e1 ~ 15 VDC 0.01V resolution\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\"\u003eWorking current (mA)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003eless than 70\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\"\u003eMaximum voltage measurement error\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003e1% + 0.02V\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\"\u003eMaximum current measurement error\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003e1.5% ± 0.008A\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\"\u003eLength (mm)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003e50\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\"\u003eWidth (mm)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003e37\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\"\u003eHeight (mm)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003e16.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\"\u003eWeight (gm)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\"\u003e\n\u003cp\u003e20\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\"\u003eShipment Weight\u003c\/td\u003e\n\u003ctd class=\"product_weight attribute_value\"\u003e\n\u003cp\u003e0.030 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"\"\u003e\n\u003ctd class=\"attribute_name\"\u003eShipment Dimensions\u003c\/td\u003e\n\u003ctd class=\"product_dimensions attribute_value\"\u003e\n\u003cp\u003e12 × 8 × 2 cm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/d70613e4-d150-4020-b53e-f1b6e43f1ae3_1.e9ce700c54a8c0f39c46259cfa496005_480x480.jpg?v=1593463207\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cspan\u003eTutorial\u003c\/span\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/v_RtSspY1Js\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/7SWExcGAnOQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e"}
