The LGX Shortcut Copperhead Printhead is a special unit that includes the LGX Large Gears eXtruder and the LGX Shortcut short filament path hotend based on Copperhead, that will master all materials and excel with the soft and flexible.
Its main feature is a 27mm shorter filament path than the standard screw mount Copperhead hotend.
This LGX Print Head only supports 1.75 mm size filament.
The LGX Shortcut Copperhead Hotend includes a reversible heat sink that can be installed on the left or right hand side of the cold block. The heat sink also includes the hole pattern for attaching 40×40 fans.
Cooling down the heat break
Our tests suggest a 4010 fan is enough to cool down the cold block and the cold zone of the heat break, even with such small contact surface to the heat sink.
In case you have an application where additional cooling is required, try using a 4020 fan or 2 LGX heat sinks, one on each side.
Main Advantages
Gives access to all available materials.
Enables to print flexible and soft materials faster.
It is small and light.
Allows mounting in many different ways.
Compatible nozzles
The hot block included in this product is compatible with the RepRap standard of nozzles.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Shopping Cart
Logging you in
{"id":6709158772822,"title":"LGX® Shortcut Copperhead Printhead","handle":"lgx®-shortcut-copperhead-printhead","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eMaster All Materials * Excel With Flexibles\u003c\/h3\u003e\n\u003cblockquote data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003csmall data-mce-fragment=\"1\"\u003eThe \u003cb data-mce-fragment=\"1\"\u003eLGX\u003c\/b\u003e Shortcut Copperhead Printhead is a special unit that includes the \u003cb data-mce-fragment=\"1\"\u003eLGX\u003c\/b\u003e Large Gears eXtruder and the \u003cb data-mce-fragment=\"1\"\u003eLGX\u003c\/b\u003e Shortcut short filament path hotend based on Copperhead, that will master all materials and excel with the soft and flexible.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIts main feature is a \u003cb data-mce-fragment=\"1\"\u003e27mm shorter filament path\u003c\/b\u003e than the standard screw mount Copperhead hotend.\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"gap-element clearfix\" id=\"gap-1166005872\"\u003e\u003cem\u003eThis LGX Print Head only supports 1.75 mm size filament.\u003c\/em\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"gap-element clearfix\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cp\u003eThe \u003cb\u003eLGX\u003c\/b\u003e Shortcut Copperhead Hotend includes a reversible heat sink that can be installed on the left or right hand side of the cold block. The heat sink also includes the hole pattern for attaching 40×40 fans.\u003c\/p\u003e\n\u003ch3\u003eCooling down the heat break\u003c\/h3\u003e\n\u003cp\u003eOur tests suggest a 4010 fan is enough to cool down the cold block and the cold zone of the heat break, even with such small contact surface to the heat sink.\u003c\/p\u003e\n\u003cblockquote\u003e\n\u003cp\u003eIn case you have an application where additional cooling is required, try using a 4020 fan or 2 LGX heat sinks, one on each side.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003ch3\u003eMain Advantages\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGives access to all available materials.\u003c\/li\u003e\n\u003cli\u003eEnables to print flexible and soft materials faster.\u003c\/li\u003e\n\u003cli\u003eIt is small and light.\u003c\/li\u003e\n\u003cli\u003eAllows mounting in many different ways.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"row row-collapse\" id=\"row-463063354\"\u003e\n\u003cdiv id=\"col-1141522283\" class=\"col small-12 large-12\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003ch3\u003eCompatible nozzles\u003c\/h3\u003e\n\u003cblockquote\u003e\n\u003cp\u003eThe hot block included in this product is compatible with the RepRap standard of nozzles.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cp\u003eMore information can be found \u003ca href=\"https:\/\/www.bondtech.se\/product\/bondtech-lgx-shortcut-copperhead-printhead\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2022-12-06T11:04:25+05:30","created_at":"2022-02-06T17:24:50+05:30","vendor":"ThinkRobotics.in","type":"3D Printer Accessories","tags":["3D-UPGRD","3D6","Air Cooled","BNTC","Bondtech","Cold Block","Copperhead","For Flexibles","Large Gears eXtruder","LGX","LGX Shortcut","Special Setup"],"price":2154999,"price_min":2154999,"price_max":2154999,"available":true,"price_varies":false,"compare_at_price":2499999,"compare_at_price_min":2499999,"compare_at_price_max":2499999,"compare_at_price_varies":false,"variants":[{"id":39721674670166,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3D6017","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"LGX® Shortcut Copperhead Printhead","public_title":null,"options":["Default Title"],"price":2154999,"weight":400,"compare_at_price":2499999,"inventory_management":"shopify","barcode":"39721674670166","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/3D6017-1.png?v=1644148710","\/\/thinkrobotics.com\/cdn\/shop\/products\/LGX-FF-Set-4899-3750x2500-1-scaled-2.jpg?v=1644148710","\/\/thinkrobotics.com\/cdn\/shop\/products\/LGX-AirCooledColdBlock-4543-2250x1500-2-scaled.jpg?v=1644148709","\/\/thinkrobotics.com\/cdn\/shop\/products\/LGX-AirCooledColdBlock-4540-2250x1500-2-scaled.jpg?v=1644148709","\/\/thinkrobotics.com\/cdn\/shop\/products\/LGX-whiteBG-4401-2250x1500-1-scaled-3.jpg?v=1644148709"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D6017-1.png?v=1644148710","options":["Title"],"media":[{"alt":null,"id":21964932907094,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1320,"width":1320,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D6017-1.png?v=1644148710"},"aspect_ratio":1.0,"height":1320,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D6017-1.png?v=1644148710","width":1320},{"alt":null,"id":21964932939862,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1700,"width":1700,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/LGX-FF-Set-4899-3750x2500-1-scaled-2.jpg?v=1644148710"},"aspect_ratio":1.0,"height":1700,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/LGX-FF-Set-4899-3750x2500-1-scaled-2.jpg?v=1644148710","width":1700},{"alt":null,"id":21964932972630,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1980,"width":1980,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/LGX-AirCooledColdBlock-4543-2250x1500-2-scaled.jpg?v=1644148709"},"aspect_ratio":1.0,"height":1980,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/LGX-AirCooledColdBlock-4543-2250x1500-2-scaled.jpg?v=1644148709","width":1980},{"alt":null,"id":21964933005398,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/LGX-AirCooledColdBlock-4540-2250x1500-2-scaled.jpg?v=1644148709"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/LGX-AirCooledColdBlock-4540-2250x1500-2-scaled.jpg?v=1644148709","width":1600},{"alt":null,"id":21964933038166,"position":5,"preview_image":{"aspect_ratio":1.5,"height":1320,"width":1980,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/LGX-whiteBG-4401-2250x1500-1-scaled-3.jpg?v=1644148709"},"aspect_ratio":1.5,"height":1320,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/LGX-whiteBG-4401-2250x1500-1-scaled-3.jpg?v=1644148709","width":1980}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eMaster All Materials * Excel With Flexibles\u003c\/h3\u003e\n\u003cblockquote data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003csmall data-mce-fragment=\"1\"\u003eThe \u003cb data-mce-fragment=\"1\"\u003eLGX\u003c\/b\u003e Shortcut Copperhead Printhead is a special unit that includes the \u003cb data-mce-fragment=\"1\"\u003eLGX\u003c\/b\u003e Large Gears eXtruder and the \u003cb data-mce-fragment=\"1\"\u003eLGX\u003c\/b\u003e Shortcut short filament path hotend based on Copperhead, that will master all materials and excel with the soft and flexible.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIts main feature is a \u003cb data-mce-fragment=\"1\"\u003e27mm shorter filament path\u003c\/b\u003e than the standard screw mount Copperhead hotend.\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"gap-element clearfix\" id=\"gap-1166005872\"\u003e\u003cem\u003eThis LGX Print Head only supports 1.75 mm size filament.\u003c\/em\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"gap-element clearfix\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cp\u003eThe \u003cb\u003eLGX\u003c\/b\u003e Shortcut Copperhead Hotend includes a reversible heat sink that can be installed on the left or right hand side of the cold block. The heat sink also includes the hole pattern for attaching 40×40 fans.\u003c\/p\u003e\n\u003ch3\u003eCooling down the heat break\u003c\/h3\u003e\n\u003cp\u003eOur tests suggest a 4010 fan is enough to cool down the cold block and the cold zone of the heat break, even with such small contact surface to the heat sink.\u003c\/p\u003e\n\u003cblockquote\u003e\n\u003cp\u003eIn case you have an application where additional cooling is required, try using a 4020 fan or 2 LGX heat sinks, one on each side.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003ch3\u003eMain Advantages\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGives access to all available materials.\u003c\/li\u003e\n\u003cli\u003eEnables to print flexible and soft materials faster.\u003c\/li\u003e\n\u003cli\u003eIt is small and light.\u003c\/li\u003e\n\u003cli\u003eAllows mounting in many different ways.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"row row-collapse\" id=\"row-463063354\"\u003e\n\u003cdiv id=\"col-1141522283\" class=\"col small-12 large-12\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003ch3\u003eCompatible nozzles\u003c\/h3\u003e\n\u003cblockquote\u003e\n\u003cp\u003eThe hot block included in this product is compatible with the RepRap standard of nozzles.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cp\u003eMore information can be found \u003ca href=\"https:\/\/www.bondtech.se\/product\/bondtech-lgx-shortcut-copperhead-printhead\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
