For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples/second over I2C. The chip can be configured as 4 single-ended input channels or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range. We like this ADC because it can run from 2V to 5V power/logic, can measure a large range of signals and it's super easy to use. It is a great general purpose 12 bit converter.
The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed to one of four options (see the datasheet table 5) so you can have up to 4 ADS1015's connected on a single 2-wire I2C bus for 16 single ended inputs.
Comes with a bit of 0.1" standard header in case you want to use it with a breadboard or perfboard. Four mounting holes for easy attachment.
Specifications:
WIDE SUPPLY RANGE: 2.0V to 5.5V
LOW CURRENT CONSUMPTION: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down
PROGRAMMABLE DATA RATE: 128SPS to 3.3kSPS
INTERNAL LOW-DRIFT VOLTAGE REFERENCE
INTERNAL OSCILLATOR
INTERNAL PGA
I2C INTERFACE: Pin-Selectable Addresses
FOUR SINGLE-ENDED OR TWO DIFFERENTIAL INPUTS
PROGRAMMABLE COMPARATOR
This board/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Shopping Cart
Logging you in
{"id":6804510277718,"title":"12 Bit I2C ADS1015 4 channel ADC Module with Pro Gain Amplifier","handle":"12-bit-i2c-ads1015-4-channel-adc-module-with-pro-gain-amplifier","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eFor microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples\/second over I2C. The chip can be configured as 4 single-ended input channels or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single\/differential signals to the full range. We like this ADC because it can run from 2V to 5V power\/logic, can measure a large range of signals and it's super easy to use. It is a great general purpose 12 bit converter.\u003c\/p\u003e\n\u003cp\u003eThe chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed to one of four options (see the datasheet table 5) so you can have up to 4 ADS1015's connected on a single 2-wire I2C bus for 16 single ended inputs.\u003c\/p\u003e\n\u003cp\u003eComes with a bit of 0.1\" standard header in case you want to use it with a breadboard or perfboard. Four mounting holes for easy attachment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWIDE SUPPLY RANGE: 2.0V to 5.5V\u003c\/li\u003e\n\u003cli\u003eLOW CURRENT CONSUMPTION: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down\u003c\/li\u003e\n\u003cli\u003ePROGRAMMABLE DATA RATE: 128SPS to 3.3kSPS\u003c\/li\u003e\n\u003cli\u003eINTERNAL LOW-DRIFT VOLTAGE REFERENCE\u003c\/li\u003e\n\u003cli\u003eINTERNAL OSCILLATOR\u003c\/li\u003e\n\u003cli\u003eINTERNAL PGA\u003c\/li\u003e\n\u003cli\u003eI2C INTERFACE: Pin-Selectable Addresses\u003c\/li\u003e\n\u003cli\u003eFOUR SINGLE-ENDED OR TWO DIFFERENTIAL INPUTS\u003c\/li\u003e\n\u003cli\u003ePROGRAMMABLE COMPARATOR\u003c\/li\u003e\n\u003cli\u003eThis board\/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2022-12-06T11:02:50+05:30","created_at":"2022-09-06T12:53:45+05:30","vendor":"ThinkRobotics.in","type":"Power Amplifiers","tags":["16 bit","4 channel","4 channel amplifier","ADC","ADS1015","ADS1115","AMP-MOD","amplifier","analog to digital","arduino","BRKOUT","ELC3","Gain","I2c","I2C amplifier","IN-MOD","Module","Pro","raspberry pi"],"price":54999,"price_min":54999,"price_max":54999,"available":true,"price_varies":false,"compare_at_price":64999,"compare_at_price_min":64999,"compare_at_price_max":64999,"compare_at_price_varies":false,"variants":[{"id":40043667554390,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ELC3029","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"12 Bit I2C ADS1015 4 channel ADC Module with Pro Gain Amplifier","public_title":null,"options":["Default Title"],"price":54999,"weight":25,"compare_at_price":64999,"inventory_management":"shopify","barcode":"40043667554390","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/ads1015-16-bit-adc-06-800x800.jpg?v=1662449720","\/\/thinkrobotics.com\/cdn\/shop\/products\/H8f922cac1e2d4810ae1569d0332aaf3ft.jpg?v=1662449720"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/ads1015-16-bit-adc-06-800x800.jpg?v=1662449720","options":["Title"],"media":[{"alt":null,"id":23255451795542,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/ads1015-16-bit-adc-06-800x800.jpg?v=1662449720"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/ads1015-16-bit-adc-06-800x800.jpg?v=1662449720","width":800},{"alt":"12 Bit I2C ADS1015 4 Channel ADC Module ","id":23255451828310,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/H8f922cac1e2d4810ae1569d0332aaf3ft.jpg?v=1662449720"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/H8f922cac1e2d4810ae1569d0332aaf3ft.jpg?v=1662449720","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eFor microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples\/second over I2C. The chip can be configured as 4 single-ended input channels or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single\/differential signals to the full range. We like this ADC because it can run from 2V to 5V power\/logic, can measure a large range of signals and it's super easy to use. It is a great general purpose 12 bit converter.\u003c\/p\u003e\n\u003cp\u003eThe chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed to one of four options (see the datasheet table 5) so you can have up to 4 ADS1015's connected on a single 2-wire I2C bus for 16 single ended inputs.\u003c\/p\u003e\n\u003cp\u003eComes with a bit of 0.1\" standard header in case you want to use it with a breadboard or perfboard. Four mounting holes for easy attachment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWIDE SUPPLY RANGE: 2.0V to 5.5V\u003c\/li\u003e\n\u003cli\u003eLOW CURRENT CONSUMPTION: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down\u003c\/li\u003e\n\u003cli\u003ePROGRAMMABLE DATA RATE: 128SPS to 3.3kSPS\u003c\/li\u003e\n\u003cli\u003eINTERNAL LOW-DRIFT VOLTAGE REFERENCE\u003c\/li\u003e\n\u003cli\u003eINTERNAL OSCILLATOR\u003c\/li\u003e\n\u003cli\u003eINTERNAL PGA\u003c\/li\u003e\n\u003cli\u003eI2C INTERFACE: Pin-Selectable Addresses\u003c\/li\u003e\n\u003cli\u003eFOUR SINGLE-ENDED OR TWO DIFFERENTIAL INPUTS\u003c\/li\u003e\n\u003cli\u003ePROGRAMMABLE COMPARATOR\u003c\/li\u003e\n\u003cli\u003eThis board\/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e"}
