This quad (4) channel Relay Module operates at 5V TTL signal and is perfect for common Arduino/Raspberry Pi control applications.
This is a 5V 4-Channel Relay interface board which can switch up to 10Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is flyback diode which will further protect your microcontroller from relay kick back.
Details:
Equipped with four high-current relay 250VAC@10A / 30VDC@10A
Active Low Trigger Operation
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
Trigger current: 5mA
Working voltage: 5V
Module size: 50 x 26 x 18.5mm (L x W x H)
Four mounting bolts holes, diameter 3.1mm
Screw terminals (Terminal Block) provided (C, NC , NO) for quick and easy connection
Flyback diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
LED Status indicators to indicate the relay ON/OFF status.
{"id":1419027349576,"title":"4 Channel Relay Module Breakout Board (5V)","handle":"4-channel-relay-module-shield-5v","description":"\u003cp\u003eThis quad (4) channel Relay Module operates at 5V TTL signal and is perfect for common Arduino\/Raspberry Pi control applications.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is a 5V 4-Channel Relay interface board\u003c\/span\u003e which can switch up to 10Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is flyback diode which will further protect your microcontroller from relay kick back.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with four high-current relay 250VAC@10A \/ 30VDC@10A\u003c\/li\u003e\n\u003cli\u003eActive Low Trigger Operation\u003c\/li\u003e\n\u003cli\u003eIt can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc\u003c\/li\u003e\n\u003cli\u003eTrigger current: 5mA\u003c\/li\u003e\n\u003cli\u003eWorking voltage: 5V\u003c\/li\u003e\n\u003cli\u003eModule size: 50 x 26 x 18.5mm (L x W x H)\u003c\/li\u003e\n\u003cli\u003eFour mounting bolts holes, diameter 3.1mm\u003c\/li\u003e\n\u003cli\u003eScrew terminals (Terminal Block) provided (C, NC , NO) for quick and easy connection\u003c\/li\u003e\n\u003cli\u003eFlyback diode to protect your microcontroller\u003c\/li\u003e\n\u003cli\u003eInput Signal Pin connected to Burg stick for easy accessibility\u003c\/li\u003e\n\u003cli\u003eLED Status indicators to indicate the relay ON\/OFF status.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/FA7GMT7I4SCV8UP.LARGE_480x480.jpg?v=1593028045\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/unnamed_3_480x480.png?v=1593028078\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch5\u003eResources\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC3001\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/LIBRARIES\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC3001\"\u003eSample Code\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTutorial\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/sWiflR1LzV8\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Tjh-cnH4klo\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2022-12-06T11:26:55+05:30","created_at":"2018-09-04T16:10:07+05:30","vendor":"ThinkRobotics.in","type":"Control Switch","tags":["1 Channel","10A","2-Channel","250VAC","4-channel","5v relay","BRKOUT","Channel","ELC3","quad channel","Relay","RLY-MOD"],"price":19999,"price_min":19999,"price_max":19999,"available":false,"price_varies":false,"compare_at_price":39595,"compare_at_price_min":39595,"compare_at_price_max":39595,"compare_at_price_varies":false,"variants":[{"id":12761854640200,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ELC3001","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"4 Channel Relay Module Breakout Board (5V)","public_title":null,"options":["Default Title"],"price":19999,"weight":126,"compare_at_price":39595,"inventory_management":"shopify","barcode":"12761854640200","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1644.jpg?v=1607765284","\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1638.jpg?v=1607765284","\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1640.jpg?v=1607765284","\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1641.jpg?v=1607765284","\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1642.jpg?v=1607765284","\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1643.jpg?v=1607765284"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1644.jpg?v=1607765284","options":["Title"],"media":[{"alt":"4 Channel Relay Module Breakout Board (5V)","id":8481523204182,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1644.jpg?v=1607765284"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1644.jpg?v=1607765284","width":3024},{"alt":"4 Channel Relay Module Breakout Board (5V)","id":8481523040342,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1638.jpg?v=1607765284"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1638.jpg?v=1607765284","width":3024},{"alt":"4 Channel Relay Module Breakout Board (5V)","id":8481523073110,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1640.jpg?v=1607765284"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1640.jpg?v=1607765284","width":3024},{"alt":"4 Channel Relay Module Breakout Board (5V)","id":8481523105878,"position":4,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1641.jpg?v=1607765284"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1641.jpg?v=1607765284","width":3024},{"alt":"4 Channel Relay Module Breakout Board (5V)","id":8481523138646,"position":5,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1642.jpg?v=1607765284"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1642.jpg?v=1607765284","width":3024},{"alt":"4 Channel Relay Module Breakout Board (5V)","id":8481523171414,"position":6,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1643.jpg?v=1607765284"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1643.jpg?v=1607765284","width":3024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis quad (4) channel Relay Module operates at 5V TTL signal and is perfect for common Arduino\/Raspberry Pi control applications.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is a 5V 4-Channel Relay interface board\u003c\/span\u003e which can switch up to 10Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is flyback diode which will further protect your microcontroller from relay kick back.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with four high-current relay 250VAC@10A \/ 30VDC@10A\u003c\/li\u003e\n\u003cli\u003eActive Low Trigger Operation\u003c\/li\u003e\n\u003cli\u003eIt can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc\u003c\/li\u003e\n\u003cli\u003eTrigger current: 5mA\u003c\/li\u003e\n\u003cli\u003eWorking voltage: 5V\u003c\/li\u003e\n\u003cli\u003eModule size: 50 x 26 x 18.5mm (L x W x H)\u003c\/li\u003e\n\u003cli\u003eFour mounting bolts holes, diameter 3.1mm\u003c\/li\u003e\n\u003cli\u003eScrew terminals (Terminal Block) provided (C, NC , NO) for quick and easy connection\u003c\/li\u003e\n\u003cli\u003eFlyback diode to protect your microcontroller\u003c\/li\u003e\n\u003cli\u003eInput Signal Pin connected to Burg stick for easy accessibility\u003c\/li\u003e\n\u003cli\u003eLED Status indicators to indicate the relay ON\/OFF status.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/FA7GMT7I4SCV8UP.LARGE_480x480.jpg?v=1593028045\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/unnamed_3_480x480.png?v=1593028078\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch5\u003eResources\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC3001\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/LIBRARIES\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC3001\"\u003eSample Code\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTutorial\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/sWiflR1LzV8\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Tjh-cnH4klo\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cul\u003e\u003c\/ul\u003e"}
