Pixhawk Kit

1. The advanced 32-bit ARM CortexM4 high-performance processors, can run NuttX RTOS real-time operating system;
2. 14 PWM / servo output;
3. Bus interface (UART, I2C, SPI, CAN);
4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe;
5. Provide automatic and manual modes;
6. Provide redundant power input and failover;
7. Multicolor LED lights;
8. Provide multi-tone buzzer Interface
9. Micro SD recording flight data;

10. Power module not included

Specifications

Microprocessor

1.32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit
2. frequency: 168MHZ, 256K RAM
3.32 STM32F103 backup coprocessor

Sensor
1.L3GD20 3-axis digital gyroscope 16
2.LSM303D 3-axis accelerometer 14 / Magnetometer
3.MPU6000 6-axis accelerometer / magnetometer
4.MS5611 precision barometer

Interface
1 .5 high voltage compatible UART 1, 2 with hardware flow control
2. 2 CAN
3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
4.Futaba SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
7.I2C
8.SPI
9.3.3 and 6.6VADC input
10. External MICRO USB Interface

Pixhawk Kit w/o Telemetry includes:

1. 1x 2.4.8 Pixhawk flight controller board with shell
2. 1x Safety switch
3. 1x Buzzer
4. 1 x SD to MicroSD Card Adaptor
5. 1x I2C splitter expansion module and 1x I2C Line
   
6. 1x Power Module and 1x PPM/SBUS Line
   
7. 1x Shock absorber
   
8. 1x 0.96" OLED Display Module
   

Pixhawk Telemetry Kit includes:

1. 1x 2.4.8 Pixhawk flight controller board with shell
2. 1x Safety switch
3. 1x Buzzer
4. 1 x SD to MicroSD Card Adaptor
5. 1x PPM encoder
6. 1x I2C splitter expansion module and 1x I2C Line
7. 1x Power Module and 1x PPM/SBUS Line
   
8. ​1x Radio Telemetry Set with receiver/transmitter and 2x antenna
9. 1x M8N GPS
10. 1x GPS holder
    
11. 1x Shock absorber
12. 1x 0.96" OLED Display Module

Resources

Datasheet

Tutorial