The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.
Logic supply voltage (VCC) can be in the range of 2.7--5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).
This little board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.
Premium build, works fine, but check ssd model support
Waveshare poe hat is premium to touch. Product works, haven't tested with a poe supply. However Check your ssd model if its supported by sending mail to waveshare support team. Some WD ssd is not supported. Rest Crucial I tried it works fine.
Ssd list (updating, but not completed)
https://www.waveshare.com/argon-one-v5-dual-m.2-case.htm
Waveshare tech support team
https://www.waveshare.com/contact_us
Definitely product is cheap in price compared to other products. But most valued for price. It's worth it.
Btw in pics below the blue wd ssd it was not supported.
Delivery was fast. Booked in pre-sale item and packaging was neat secure. Gpio pins wrapped with foam product was wrapped multi layer with foam.
{"id":6620686188630,"title":"TB6612FNG \/ TB6612 Dual Motor Driver 1A","handle":"tb6612fng-tb6612-dual-motor-driver-1a","description":"\u003cp data-mce-fragment=\"1\"\u003eThe TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLogic supply voltage (VCC) can be in the range of 2.7--5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis little board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1\" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.\u003c\/p\u003e","published_at":"2022-12-06T11:11:58+05:30","created_at":"2021-08-24T11:35:18+05:30","vendor":"ThinkRobotics","type":"","tags":["arduino motor driver","Arduino motor shield","DC motor driver","drv8833","elc4","ELC4020","Motor driver","Motor Driver Module","Motor driver Shield","motor drivers","MTR-DRV","servo motor drivers","stepper motor driver","TB6612","TB6612FNG","ZOHO UPDATED"],"price":18999,"price_min":18999,"price_max":18999,"available":false,"price_varies":false,"compare_at_price":23500,"compare_at_price_min":23500,"compare_at_price_max":23500,"compare_at_price_varies":false,"variants":[{"id":39516300476502,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ELC4020","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"TB6612FNG \/ TB6612 Dual Motor Driver 1A","public_title":null,"options":["Default Title"],"price":18999,"weight":20,"compare_at_price":23500,"inventory_management":"shopify","barcode":"ELC4020","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/H74271a04d9a948cd83d14b6e4f780242P.jpg?v=1629785446"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/H74271a04d9a948cd83d14b6e4f780242P.jpg?v=1629785446","options":["Title"],"media":[{"alt":"TB6612FNG \/ TB6612 Dual Motor Driver 1A","id":21212640149590,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1360,"width":1360,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/H74271a04d9a948cd83d14b6e4f780242P.jpg?v=1629785446"},"aspect_ratio":1.0,"height":1360,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/H74271a04d9a948cd83d14b6e4f780242P.jpg?v=1629785446","width":1360}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003eThe TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLogic supply voltage (VCC) can be in the range of 2.7--5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis little board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1\" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.\u003c\/p\u003e"}
