The DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). It's fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so sensor readings can be up to 2 seconds old.
Simply connect the first pin on the left to 3-5V power, the second pin to your data input pin and the rightmost pin to ground. Although it uses a single-wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin.
Compared to the DHT11, this sensor is more precise, more accurate and works in a bigger range of temperature/humidity, but its larger and more expensive.
Comes with a 4.7K - 10K resistor, which you will want to use as a pullup from the data pin to VCC.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Shopping Cart
Logging you in
{"id":1415960559688,"title":"DHT22 Temperature and Humidity Module","handle":"dht22-temperature-and-humidity-sensor-module","description":"\u003cp\u003e\u003cspan\u003eThe DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). It's fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so sensor readings can be up to 2 seconds old.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSimply connect the first pin on the left to 3-5V power, the second pin to your data input pin and the rightmost pin to ground. Although it uses a single-wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCompared to the DHT11, this sensor is more precise, more accurate and works in a bigger range of temperature\/humidity, but its larger and more expensive.\u003cbr\u003e\u003cbr\u003eComes with a 4.7K - 10K resistor, which you will want to use as a pullup from the data pin to VCC.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply: 3.3V – 6V DC\u003c\/li\u003e\n\u003cli\u003eOutput signal: single-bus\u003c\/li\u003e\n\u003cli\u003eSensing element: polymer humidity capacitor \u0026amp; DS18B20\u003c\/li\u003e\n\u003cli\u003eMeasuring range: humidity 0-100% RH \/ temperature -40°C – 125°C\u003c\/li\u003e\n\u003cli\u003eAccuracy: humidity ±2% \/ temperature ±0.2°C\u003c\/li\u003e\n\u003cli\u003eSensing period: ~2s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/DHT22_480x480.jpg?v=1585750218\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/ELC1005_480x480.png?v=1592327660\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch5\u003eResources \u003c\/h5\u003e\n\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1005\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/LIBRARIES\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1005\" target=\"_blank\"\u003eLibraries \u003c\/a\u003e \u003cbr\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/SAMPLE_CODE\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1005\" target=\"_blank\"\u003eSample Code\u003c\/a\u003e\n\u003ch5\u003eTutorials\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/RODHGWfcLws\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/nssXWNYdGT8\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e","published_at":"2022-12-06T11:28:09+05:30","created_at":"2018-08-31T18:17:01+05:30","vendor":"ThinkRobotics.in","type":"Sensor","tags":["DHT 22","DHT22","ELC1","ENVR-SNR","Humidity and Temperature","Humidity Sensor","Temperature Sensor"],"price":29999,"price_min":29999,"price_max":29999,"available":true,"price_varies":false,"compare_at_price":49999,"compare_at_price_min":49999,"compare_at_price_max":49999,"compare_at_price_varies":false,"variants":[{"id":12739909288008,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ELC1005","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DHT22 Temperature and Humidity Module","public_title":null,"options":["Default Title"],"price":29999,"weight":12,"compare_at_price":49999,"inventory_management":"shopify","barcode":"12739909288008","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/61jaLGUL_UL._SL1024.jpg?v=1643215454","\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_2920.jpg?v=1643215454","\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_2927.jpg?v=1643215454","\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_2928.jpg?v=1643215454"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/61jaLGUL_UL._SL1024.jpg?v=1643215454","options":["Title"],"media":[{"alt":"DHT22 Temperature \u0026 Humidity Module","id":21909828632662,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/61jaLGUL_UL._SL1024.jpg?v=1643215454"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/61jaLGUL_UL._SL1024.jpg?v=1643215454","width":1024},{"alt":"DHT22 Temperature and Humidity Sensor Module - ThinkRobotics.in","id":790294167624,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2300,"width":2300,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_2920.jpg?v=1643215454"},"aspect_ratio":1.0,"height":2300,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_2920.jpg?v=1643215454","width":2300},{"alt":"DHT22 Temperature and Humidity Sensor Module - ThinkRobotics.in","id":790294200392,"position":3,"preview_image":{"aspect_ratio":1.199,"height":2523,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_2927.jpg?v=1643215454"},"aspect_ratio":1.199,"height":2523,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_2927.jpg?v=1643215454","width":3024},{"alt":"DHT22 Temperature and Humidity Sensor Module - ThinkRobotics.in","id":790294233160,"position":4,"preview_image":{"aspect_ratio":1.06,"height":2854,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_2928.jpg?v=1643215454"},"aspect_ratio":1.06,"height":2854,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_2928.jpg?v=1643215454","width":3024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThe DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). It's fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so sensor readings can be up to 2 seconds old.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSimply connect the first pin on the left to 3-5V power, the second pin to your data input pin and the rightmost pin to ground. Although it uses a single-wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCompared to the DHT11, this sensor is more precise, more accurate and works in a bigger range of temperature\/humidity, but its larger and more expensive.\u003cbr\u003e\u003cbr\u003eComes with a 4.7K - 10K resistor, which you will want to use as a pullup from the data pin to VCC.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply: 3.3V – 6V DC\u003c\/li\u003e\n\u003cli\u003eOutput signal: single-bus\u003c\/li\u003e\n\u003cli\u003eSensing element: polymer humidity capacitor \u0026amp; DS18B20\u003c\/li\u003e\n\u003cli\u003eMeasuring range: humidity 0-100% RH \/ temperature -40°C – 125°C\u003c\/li\u003e\n\u003cli\u003eAccuracy: humidity ±2% \/ temperature ±0.2°C\u003c\/li\u003e\n\u003cli\u003eSensing period: ~2s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/DHT22_480x480.jpg?v=1585750218\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/ELC1005_480x480.png?v=1592327660\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch5\u003eResources \u003c\/h5\u003e\n\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1005\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/LIBRARIES\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1005\" target=\"_blank\"\u003eLibraries \u003c\/a\u003e \u003cbr\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/SAMPLE_CODE\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1005\" target=\"_blank\"\u003eSample Code\u003c\/a\u003e\n\u003ch5\u003eTutorials\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/RODHGWfcLws\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/nssXWNYdGT8\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e"}
The shipment delivery was fast and efficient. They even called me before shipping the order to let me know when the order will be dispatched and estimated time of arrival. Very happy with their service.
