The PIR Sensor module allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor's range. It is often referred to used "PIR", "Pyroelectric", "Passive Infrared" and "IR Motion" sensor. The module has an on-board pyroelectric sensor, conditioning circuitry and a dome shaped Fresnel lens.The PIR sensor module provides an output "HIGH" when a human body is detected within its range and an automatic Delay "LOW" when the body leaves its range. The delay time is adjustable using the potentiometer on-board. The minimum delay time that can be set is 5 seconds and maximum of 200 seconds. The blocking time potentiometer is also provided on-board to set the blocking time during which the sensor does not respond to any change in motion. The minimum blocking time that can be set is 2.5 seconds and maximum of 10 seconds.
Wide range on input voltage varying from 4.V to 12V (+5V recommended)
Output voltage is High/Low (3.3V TTL)
Can distinguish between object movement and human movement
Has two operating modes - Repeatable and Non-Repeatable
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Shopping Cart
{"id":1415962591304,"title":"HC-SR501 PIR Motion Sensor","handle":"human-body-pir-pyroelectric-infrared-sensor-hc-sr501","description":"\u003cp\u003e\u003cspan\u003eThe PIR Sensor module allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor's range. It is often referred to used \"PIR\", \"Pyroelectric\", \"Passive Infrared\" and \"IR Motion\" sensor. The module has an on-board pyroelectric sensor, conditioning circuitry and a dome shaped Fresnel lens.The PIR sensor module provides an output \"HIGH\" when a human body is detected within its range and an automatic Delay \"LOW\" when the body leaves its range. The delay time is adjustable using the potentiometer on-board. The minimum delay time that can be set is 5 seconds and maximum of 200 seconds.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe blocking time potentiometer is also provided on-board to set the blocking time during which the sensor does not respond to any change in motion. The minimum blocking time that can be set is 2.5 seconds and maximum of 10 seconds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWide range on input voltage varying from 4.V to 12V (+5V recommended)\u003c\/li\u003e\n\u003cli\u003eOutput voltage is High\/Low (3.3V TTL)\u003c\/li\u003e\n\u003cli\u003eCan distinguish between object movement and human movement\u003c\/li\u003e\n\u003cli\u003eHas two operating modes - Repeatable and Non-Repeatable\u003c\/li\u003e\n\u003cli\u003eCover distance of about 120° and 7 meters\u003c\/li\u003e\n\u003cli\u003eCurrent Consumption: 65mA\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -20°C to +80°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/sr501-pir-1_480x480.jpg?v=1585746911\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/ELC1003_480x480.png?v=1592324404\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/ELC1003b_480x480.jpg?v=1592324417\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch5\u003eResources\u003cbr\u003e\n\u003c\/h5\u003e\n\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1003\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDatasheet\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/SAMPLE_CODE\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1003\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSample Code\u003c\/a\u003e\n\u003ch5\u003eTutorials\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/mZCJNOf69JI\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/u4bdmXqppB8\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2022-12-06T11:28:06+05:30","created_at":"2018-08-31T18:23:03+05:30","vendor":"ThinkRobotics","type":"Sensor","tags":["Arduino","ELC1","Human body Sensor","Infrared","Motion","Motion Detection","Motion Sensor","MTN-SNR","PIR","PIR Sensor","Pyroelectric Sensor","Sensor","ZOHO UPDATED"],"price":8899,"price_min":8899,"price_max":8899,"available":true,"price_varies":false,"compare_at_price":10000,"compare_at_price_min":10000,"compare_at_price_max":10000,"compare_at_price_varies":false,"variants":[{"id":12739911155784,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ELC1003","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HC-SR501 PIR Motion Sensor","public_title":null,"options":["Default Title"],"price":8899,"weight":10,"compare_at_price":10000,"inventory_management":"shopify","barcode":"ELC1003","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/20190604_121829.jpg?v=1585746749","\/\/thinkrobotics.com\/cdn\/shop\/products\/20190604_121917.jpg?v=1585746749","\/\/thinkrobotics.com\/cdn\/shop\/products\/20190604_122218.jpg?v=1585746749","\/\/thinkrobotics.com\/cdn\/shop\/products\/20190604_122342.jpg?v=1585746750"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190604_121829.jpg?v=1585746749","options":["Title"],"media":[{"alt":"HC-SR501 PIR Motion Sensor ","id":6770122129494,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1573,"width":1573,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190604_121829.jpg?v=1585746749"},"aspect_ratio":1.0,"height":1573,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190604_121829.jpg?v=1585746749","width":1573},{"alt":"HC-SR501 PIR Motion Sensor ","id":6770122162262,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1330,"width":1330,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190604_121917.jpg?v=1585746749"},"aspect_ratio":1.0,"height":1330,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190604_121917.jpg?v=1585746749","width":1330},{"alt":"HC-SR501 PIR Motion Sensor ","id":6770122195030,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3020,"width":3021,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190604_122218.jpg?v=1585746749"},"aspect_ratio":1.0,"height":3020,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190604_122218.jpg?v=1585746749","width":3021},{"alt":null,"id":6770122227798,"position":4,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190604_122342.jpg?v=1585746750"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20190604_122342.jpg?v=1585746750","width":3024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThe PIR Sensor module allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor's range. It is often referred to used \"PIR\", \"Pyroelectric\", \"Passive Infrared\" and \"IR Motion\" sensor. The module has an on-board pyroelectric sensor, conditioning circuitry and a dome shaped Fresnel lens.The PIR sensor module provides an output \"HIGH\" when a human body is detected within its range and an automatic Delay \"LOW\" when the body leaves its range. The delay time is adjustable using the potentiometer on-board. The minimum delay time that can be set is 5 seconds and maximum of 200 seconds.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe blocking time potentiometer is also provided on-board to set the blocking time during which the sensor does not respond to any change in motion. The minimum blocking time that can be set is 2.5 seconds and maximum of 10 seconds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWide range on input voltage varying from 4.V to 12V (+5V recommended)\u003c\/li\u003e\n\u003cli\u003eOutput voltage is High\/Low (3.3V TTL)\u003c\/li\u003e\n\u003cli\u003eCan distinguish between object movement and human movement\u003c\/li\u003e\n\u003cli\u003eHas two operating modes - Repeatable and Non-Repeatable\u003c\/li\u003e\n\u003cli\u003eCover distance of about 120° and 7 meters\u003c\/li\u003e\n\u003cli\u003eCurrent Consumption: 65mA\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -20°C to +80°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/sr501-pir-1_480x480.jpg?v=1585746911\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/ELC1003_480x480.png?v=1592324404\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/ELC1003b_480x480.jpg?v=1592324417\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch5\u003eResources\u003cbr\u003e\n\u003c\/h5\u003e\n\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1003\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDatasheet\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/SAMPLE_CODE\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC1003\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSample Code\u003c\/a\u003e\n\u003ch5\u003eTutorials\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/mZCJNOf69JI\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/u4bdmXqppB8\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e"}
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
Team is suppotive and solves all the queries .
The product is good and will surely help me in my project...looking forward for more trades with think robotics.
