PETG is a high cost performance material with water resistance, chemical resistance and high toughness. It’s tougher than ABS; The printed product has translucent and smooth surface. It’s easy to print as PLA without temperature chamber.
Features:
- Translucent
- Tough
- High Chemical Resistance
- Water Resistant
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | PETG |
| Density(g/cm3) | 1.27 |
| Heat Distortion Temp(℃,0.45MPa) | 64 |
| Melt Flow Index(g/10min) | 20（250℃/2.16kg) |
| Tensile Strength(MPa) | 52.2 |
| Elongation at Break(%) | 83 |
| Flexural Strength(MPa) | 58.1 |
| Flexural Modulus(MPa) | 1073 |
| IZOD Impact Strength(kJ/㎡) | 4.7 |
| Durability | 8/10 |
| Printability | 9/10 |
|
Recommended printing parameters |
|
| Extruder Temperature(℃) | 230 – 250℃ Recommended temperature：240℃ |
| Bed temperature(℃) | 75 – 90°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Required |
| Recommended Build Surfaces | Masking paper, PVP solid glue |
| Feature | |
| Flexible | —— |
| Elastic | —— |
| Impact Resistant | —— |
| Soft | —— |
| Composite | —— |
| UV Resistant | —— |
| Water Resistant | √ |
| Dissolvable | —— |
| Heat Resistant | —— |
| Chemically Resistant | √ |
| Fatigue Resistant | √ |
| Need drying | —— |
| Heated Bed Required | √ |
| Print recommend | Drying at 65℃/>3h |
Want to buy in bulk?
Custom Requirements?
Discussion Forum
Welcome to the discussion thread for eSun PETG Filament (1kg)
Feel free to ask questions, share tips or report issues.
Feel free to ask questions, share tips or report issues.
