Quiescent Current: 15mA (when 12V step up to 20V), if the output voltage is higher, the quiescent current will increase.)
Output Voltage :12-80VDC (continuously adjustable),default output: 19VDC
Output Current:12A Max.(over 10A,please enhance heat dissipation.), the greater the input and output voltage difference , the smaller the output current
Constant current range :0.1-12A
Output power: = Input voltage * 10A, such as: input 60V * 10A = 600W,if need more output power, such as need the output to 15A,two modules can be used in paralle, the current of each module can be adjusted to 8A.
Conversion efficiency: Up to 95%
Operating Frequency: 150KHz
Operating temperature: -40 to +85 °c (if the ambient temperature is too high, please enhance heat dissipation)
Overcurrent protection: Yes (if the input exceeds 17A, automatically reduces the output voltage)
Output feeding back protection:Yes (for charging,the separate output diode is not required.)
Input Reverse Polarity Protection:None (If need please install diode at the input port )
Installation: two 3mm screws
Connection: terminals, solderless
Dimensions: 76mm x 60mm x 56mm
Module Weight: 205 g
Application:
DIY a regulator power supply, input 12V, output can be 12-80V adjustable.
The power supply for electronic equipment.
Used as a car power supply, Power supply forlaptop,PDA, or other digital products
DIY a laptop mobile power supply: 12V coupled with high-capacity lithium batteries,
Solar panel regulator
Batteries charger
Drivinghigh-power LEDlights.
Note:
For battery charging, the need to battery is fully discharged,then connected to the output, and then adjusted to the desired current. Because the more the battery remaining, the smaller the charge current.
When the Input voltage rang of 9-12VDC (short circuit method), under this state, the module circuit can not be adjusted.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Shopping Cart
{"id":6633051095126,"title":"DC12-80V 600W High Power Adjustable Voltage Constant Current Module","handle":"600w-12a-constant-current-boost-module","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjustable output current. 600W boost module, 12V - 60V wide input voltage, 12 - 80V wide adjustable output voltage, Ultra-low dropout voltage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eModule Parameters:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModule Name: 600W boost\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003econstant current\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003emodule, non-isolated\u003c\/li\u003e\n\u003cli\u003eInput voltage\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1: 12-60VDC\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e(default range, for wide input voltage range applications)\u003c\/li\u003e\n\u003cli\u003eInput voltage\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e2: 9-16VDC \u003c\/span\u003e(for 3 lithium battery and 12V battery) , please do not overrange\u003c\/li\u003e\n\u003cli\u003eInput Current:\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e16A MAX.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e(over 10A,please enhance heat dissipation,such as 5cm cooling fan)\u003c\/li\u003e\n\u003cli\u003eQuiescent Current: 15mA (when 12V step up to 20V), if the output voltage is higher, the quiescent current will increase.)\u003c\/li\u003e\n\u003cli\u003eOutput Voltage :\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e12-80VDC\u003c\/span\u003e\u003cspan\u003e (continuously adjustable),default output: 19VDC\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput Current:\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e12A Max.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e(over 10A,please enhance heat dissipation.), the greater the input and output voltage difference , the smaller the output current\u003c\/li\u003e\n\u003cli\u003eConstant current range :\u003cspan\u003e0.1-12A\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput power: = Input voltage * 10A, such as: input 60V * 10A = 600W,if need more output power, such as need the output to 15A,two modules can be used in paralle, the current of each module can be adjusted to 8A.\u003c\/li\u003e\n\u003cli\u003eConversion efficiency: Up to 95%\u003c\/li\u003e\n\u003cli\u003eOperating Frequency: 150KHz\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to +85 °c (if the ambient temperature is too high, please enhance heat dissipation)\u003c\/li\u003e\n\u003cli\u003eOvercurrent protection: Yes (if the input exceeds 17A, automatically reduces the output voltage)\u003c\/li\u003e\n\u003cli\u003eShort-circuit protection: Yes (20A input fuse,double short-circuit protection.)\u003c\/li\u003e\n\u003cli\u003eOutput feeding back protection:Yes (for charging,the separate output diode is not required.)\u003c\/li\u003e\n\u003cli\u003eInput Reverse Polarity Protection:None (If need please install diode at the input port )\u003c\/li\u003e\n\u003cli\u003eInstallation: two 3mm screws\u003c\/li\u003e\n\u003cli\u003eConnection: terminals, solderless\u003c\/li\u003e\n\u003cli\u003eDimensions: 76mm x 60mm x 56mm\u003c\/li\u003e\n\u003cli\u003eModule Weight: 205 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003cb\u003eApplication:\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDIY a regulator power supply, input 12V, output can be 12-80V adjustable.\u003c\/li\u003e\n\u003cli\u003eThe power supply for electronic equipment.\u003c\/li\u003e\n\u003cli\u003eUsed as a car power supply, Power supply for\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003elaptop,PDA\u003c\/span\u003e, or other digital products\u003c\/li\u003e\n\u003cli\u003eDIY a laptop mobile power supply: 12V coupled with high-capacity lithium batteries,\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolar panel regulator\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBatteries charger\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eDriving\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ehigh-power LED\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003elights.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor battery charging, the need to battery is fully discharged,then connected to the output, and then adjusted to the desired current. Because the more the battery remaining, the smaller the charge current.\u003c\/li\u003e\n\u003cli\u003eWhen the Input voltage rang of 9-12VDC (short circuit method), under this state, the module circuit can not be adjusted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/HTB1G9tlKx9YBuNjy0Ffq6xIsVXa0_600x600.jpg?v=1632152150\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2022-12-06T11:08:30+05:30","created_at":"2021-09-20T21:04:26+05:30","vendor":"ThinkRobotics","type":"power module","tags":["12A","5v boost","600W","boost 5v","boost convertor","boost module","BST-MOD","Constant Current Boost Module","ELC5","LIPO boost module","lithium ion boost","power module","POWER-MOD","ZOHO UPDATED"],"price":89999,"price_min":89999,"price_max":89999,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39546629226582,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ELC5063","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DC12-80V 600W High Power Adjustable Voltage Constant Current Module","public_title":null,"options":["Default Title"],"price":89999,"weight":60,"compare_at_price":null,"inventory_management":"shopify","barcode":"ELC5063","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/HTB1PYm1Kv1TBuNjy0Fjq6yjyXXaR.jpg?v=1632152139","\/\/thinkrobotics.com\/cdn\/shop\/products\/HTB1wsA_KbGYBuNjy0Foq6AiBFXae.jpg?v=1632152139"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/HTB1PYm1Kv1TBuNjy0Fjq6yjyXXaR.jpg?v=1632152139","options":["Title"],"media":[{"alt":"600W High Power Voltage Module","id":21313322025046,"position":1,"preview_image":{"aspect_ratio":1.021,"height":473,"width":483,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/HTB1PYm1Kv1TBuNjy0Fjq6yjyXXaR.jpg?v=1632152139"},"aspect_ratio":1.021,"height":473,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/HTB1PYm1Kv1TBuNjy0Fjq6yjyXXaR.jpg?v=1632152139","width":483},{"alt":"600W High Power Voltage Module","id":21313321992278,"position":2,"preview_image":{"aspect_ratio":1.111,"height":450,"width":500,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/HTB1wsA_KbGYBuNjy0Foq6AiBFXae.jpg?v=1632152139"},"aspect_ratio":1.111,"height":450,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/HTB1wsA_KbGYBuNjy0Foq6AiBFXae.jpg?v=1632152139","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjustable output current. 600W boost module, 12V - 60V wide input voltage, 12 - 80V wide adjustable output voltage, Ultra-low dropout voltage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eModule Parameters:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModule Name: 600W boost\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003econstant current\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003emodule, non-isolated\u003c\/li\u003e\n\u003cli\u003eInput voltage\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1: 12-60VDC\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e(default range, for wide input voltage range applications)\u003c\/li\u003e\n\u003cli\u003eInput voltage\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e2: 9-16VDC \u003c\/span\u003e(for 3 lithium battery and 12V battery) , please do not overrange\u003c\/li\u003e\n\u003cli\u003eInput Current:\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e16A MAX.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e(over 10A,please enhance heat dissipation,such as 5cm cooling fan)\u003c\/li\u003e\n\u003cli\u003eQuiescent Current: 15mA (when 12V step up to 20V), if the output voltage is higher, the quiescent current will increase.)\u003c\/li\u003e\n\u003cli\u003eOutput Voltage :\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e12-80VDC\u003c\/span\u003e\u003cspan\u003e (continuously adjustable),default output: 19VDC\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput Current:\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e12A Max.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e(over 10A,please enhance heat dissipation.), the greater the input and output voltage difference , the smaller the output current\u003c\/li\u003e\n\u003cli\u003eConstant current range :\u003cspan\u003e0.1-12A\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput power: = Input voltage * 10A, such as: input 60V * 10A = 600W,if need more output power, such as need the output to 15A,two modules can be used in paralle, the current of each module can be adjusted to 8A.\u003c\/li\u003e\n\u003cli\u003eConversion efficiency: Up to 95%\u003c\/li\u003e\n\u003cli\u003eOperating Frequency: 150KHz\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to +85 °c (if the ambient temperature is too high, please enhance heat dissipation)\u003c\/li\u003e\n\u003cli\u003eOvercurrent protection: Yes (if the input exceeds 17A, automatically reduces the output voltage)\u003c\/li\u003e\n\u003cli\u003eShort-circuit protection: Yes (20A input fuse,double short-circuit protection.)\u003c\/li\u003e\n\u003cli\u003eOutput feeding back protection:Yes (for charging,the separate output diode is not required.)\u003c\/li\u003e\n\u003cli\u003eInput Reverse Polarity Protection:None (If need please install diode at the input port )\u003c\/li\u003e\n\u003cli\u003eInstallation: two 3mm screws\u003c\/li\u003e\n\u003cli\u003eConnection: terminals, solderless\u003c\/li\u003e\n\u003cli\u003eDimensions: 76mm x 60mm x 56mm\u003c\/li\u003e\n\u003cli\u003eModule Weight: 205 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003cb\u003eApplication:\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDIY a regulator power supply, input 12V, output can be 12-80V adjustable.\u003c\/li\u003e\n\u003cli\u003eThe power supply for electronic equipment.\u003c\/li\u003e\n\u003cli\u003eUsed as a car power supply, Power supply for\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003elaptop,PDA\u003c\/span\u003e, or other digital products\u003c\/li\u003e\n\u003cli\u003eDIY a laptop mobile power supply: 12V coupled with high-capacity lithium batteries,\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolar panel regulator\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBatteries charger\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eDriving\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ehigh-power LED\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003elights.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor battery charging, the need to battery is fully discharged,then connected to the output, and then adjusted to the desired current. Because the more the battery remaining, the smaller the charge current.\u003c\/li\u003e\n\u003cli\u003eWhen the Input voltage rang of 9-12VDC (short circuit method), under this state, the module circuit can not be adjusted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/HTB1G9tlKx9YBuNjy0Ffq6xIsVXa0_600x600.jpg?v=1632152150\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e"}
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
Team is suppotive and solves all the queries .
The product is good and will surely help me in my project...looking forward for more trades with think robotics.
