Its a TP5000 Battery Charging Module with support for Lithium Ion and Lithium Phosphate Batteries, and works with 4.2V as well as 3.6V Battery. The default charging current on this module is 1A but is adjustable by changing value of current shunt sensing resistor. It has Over current, over discharge and over current protection. RED led indicates that the battery is charging, and green indicates the the battery is fully charged.
The TP5000 Battery Charging Module has input voltage range of DC 4.5V – 9V (Recommended Input Voltage should not exceed 7V). The default output voltage is 4.2V (for charging the Lithium Ion Battery). The default Output Current is 1A. This module can also charge Lithium Phosphate Battery. To charge, the lithium ion phosphate battery, one should connect the solder pads with F label.
The output current is variable by soldering extra resistor on blank pad just below the SANYA label, below R100 resistor.
The TP5000 Battery Charging Module has a switching regulator integrated, which reduces the heat produced as compared to linear regulators. It also has a blank pad on the bottom side to dissipate the heat, the user can fix heat sink there, in case of output current needed is more than 1A. The TP5000 Battery Charging Module can work as LIfePO4 Battery Charger and also charge Li-ion Battery.
Features
Input Voltage Range: DC 4.5V – 9V ( Recommended Input voltage should not exceed 7V)
Output Voltage: 4.2V/3.6V (Changeable)
Default Output Voltage: 4.2V (For Lithium Ion Battery)
Can charge Lithium Ion Battery (4.2V) as well as Lithium Phosphate battery (3.6V)
Output Current: 1A (Default, Changeable)
LED Indicator: RED indicates charging ON, GREEN indicates charging complete
F Solder pad connected: 3.6V Lithium Phosphate Battery Charging Mode
F Solder pad unconnected: 4.2V Lithium Ion Battery Charging Mode
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
Team is suppotive and solves all the queries .
The product is good and will surely help me in my project...looking forward for more trades with think robotics.
{"id":6732872089686,"title":"TP5000 4.2V\/3.6V 1A Lithium Battery Charging Module","handle":"tp5000-4-2v-3-6v-1a-lithium-battery-charging-module","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIts a TP5000 Battery Charging Module with support for Lithium Ion and Lithium Phosphate Batteries, and works with 4.2V as well as 3.6V Battery. The default charging current on this module is 1A but is adjustable by changing value of current shunt sensing resistor. It has Over current, over discharge and over current protection. RED led indicates that the battery is charging, and green indicates the the battery is fully charged.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe TP5000 Battery Charging Module has input voltage range of DC 4.5V – 9V (Recommended Input Voltage should not exceed 7V). The default output voltage is 4.2V (for charging the \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.ktron.in\/product\/18650-lithium-ion-battery-bak-2400mah-3c-1000cycle\/\" data-mce-href=\"https:\/\/www.ktron.in\/product\/18650-lithium-ion-battery-bak-2400mah-3c-1000cycle\/\"\u003eLithium Ion Battery\u003c\/a\u003e). The default Output Current is 1A. This module can also charge Lithium Phosphate Battery. To charge, the lithium ion phosphate battery, one should connect the solder pads with \u003cstrong data-mce-fragment=\"1\"\u003eF \u003c\/strong\u003elabel.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe output current is variable by soldering extra resistor on blank pad just below the \u003cstrong data-mce-fragment=\"1\"\u003eSANYA \u003c\/strong\u003elabel, below R100 resistor.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe TP5000 Battery Charging Module has a switching regulator integrated, which reduces the heat produced as compared to linear regulators. It also has a blank pad on the bottom side to dissipate the heat, the user can fix heat sink there, in case of output current needed is more than 1A. The TP5000 Battery Charging Module can work as LIfePO4 Battery Charger and also charge Li-ion Battery.\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eFeatures\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInput Voltage Range: DC 4.5V – 9V ( Recommended Input voltage should not exceed 7V)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOutput Voltage: 4.2V\/3.6V (Changeable)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDefault Output Voltage: 4.2V (For Lithium Ion Battery)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan charge Lithium Ion Battery (4.2V) as well as Lithium Phosphate battery (3.6V)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOutput Current: 1A (Default, Changeable)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLED Indicator: RED indicates charging ON, GREEN indicates charging complete\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eF Solder pad connected: 3.6V Lithium Phosphate Battery Charging Mode\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eF Solder pad unconnected: 4.2V Lithium Ion Battery Charging Mode\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdjustable Output Current:\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDefault Current: 1A ( 0.1 Ohms R100 resistor Soldered below SANYA label)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOutput Current: 1.5A (Solder 0.2 Ohms resistor below R100 resistor below SANYA label)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOutput Current: 2A (Solder 0.1 Ohms resistor below R100 resistor below SANYA label)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSet Output Current: 0.5A (Remove R100 resistor below SANYA, instead solder 0.2 Ohms resistor there)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdditional Heat Sink Required when Output Current more than 1A\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2022-12-06T11:04:06+05:30","created_at":"2022-04-01T08:35:34+05:30","vendor":"ThinkRobotics","type":"power module","tags":["1A","3.6V","4.2V","BATT-CHG","Board","Breakout","Charger","Charging","Ion","Li-Ion","LIfePO4","Lithium","Module","power","TP5000","ZOHO UPDATED"],"price":9999,"price_min":9999,"price_max":9999,"available":false,"price_varies":false,"compare_at_price":14999,"compare_at_price_min":14999,"compare_at_price_max":14999,"compare_at_price_varies":false,"variants":[{"id":39781550227542,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ELC5072","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"TP5000 4.2V\/3.6V 1A Lithium Battery Charging Module","public_title":null,"options":["Default Title"],"price":9999,"weight":10,"compare_at_price":14999,"inventory_management":"shopify","barcode":"ELC5072","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/Se4851802b72d4308a011d3337c5fa2ecA.jpg?v=1648782711","\/\/thinkrobotics.com\/cdn\/shop\/products\/S5ce6beb3cbe64899b7c890be0073909bl.jpg?v=1648782711"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/Se4851802b72d4308a011d3337c5fa2ecA.jpg?v=1648782711","options":["Title"],"media":[{"alt":"TP5000 4.2V\/3.6V 1A Lithium Battery Charging Module","id":22226010964054,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1396,"width":1396,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/Se4851802b72d4308a011d3337c5fa2ecA.jpg?v=1648782711"},"aspect_ratio":1.0,"height":1396,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/Se4851802b72d4308a011d3337c5fa2ecA.jpg?v=1648782711","width":1396},{"alt":"TP5000 4.2V\/3.6V 1A Lithium Battery Charging Module","id":22226010931286,"position":2,"preview_image":{"aspect_ratio":1.0,"height":880,"width":880,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/S5ce6beb3cbe64899b7c890be0073909bl.jpg?v=1648782711"},"aspect_ratio":1.0,"height":880,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/S5ce6beb3cbe64899b7c890be0073909bl.jpg?v=1648782711","width":880}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIts a TP5000 Battery Charging Module with support for Lithium Ion and Lithium Phosphate Batteries, and works with 4.2V as well as 3.6V Battery. The default charging current on this module is 1A but is adjustable by changing value of current shunt sensing resistor. It has Over current, over discharge and over current protection. RED led indicates that the battery is charging, and green indicates the the battery is fully charged.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe TP5000 Battery Charging Module has input voltage range of DC 4.5V – 9V (Recommended Input Voltage should not exceed 7V). The default output voltage is 4.2V (for charging the \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.ktron.in\/product\/18650-lithium-ion-battery-bak-2400mah-3c-1000cycle\/\" data-mce-href=\"https:\/\/www.ktron.in\/product\/18650-lithium-ion-battery-bak-2400mah-3c-1000cycle\/\"\u003eLithium Ion Battery\u003c\/a\u003e). The default Output Current is 1A. This module can also charge Lithium Phosphate Battery. To charge, the lithium ion phosphate battery, one should connect the solder pads with \u003cstrong data-mce-fragment=\"1\"\u003eF \u003c\/strong\u003elabel.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe output current is variable by soldering extra resistor on blank pad just below the \u003cstrong data-mce-fragment=\"1\"\u003eSANYA \u003c\/strong\u003elabel, below R100 resistor.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe TP5000 Battery Charging Module has a switching regulator integrated, which reduces the heat produced as compared to linear regulators. It also has a blank pad on the bottom side to dissipate the heat, the user can fix heat sink there, in case of output current needed is more than 1A. The TP5000 Battery Charging Module can work as LIfePO4 Battery Charger and also charge Li-ion Battery.\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eFeatures\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInput Voltage Range: DC 4.5V – 9V ( Recommended Input voltage should not exceed 7V)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOutput Voltage: 4.2V\/3.6V (Changeable)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDefault Output Voltage: 4.2V (For Lithium Ion Battery)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan charge Lithium Ion Battery (4.2V) as well as Lithium Phosphate battery (3.6V)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOutput Current: 1A (Default, Changeable)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLED Indicator: RED indicates charging ON, GREEN indicates charging complete\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eF Solder pad connected: 3.6V Lithium Phosphate Battery Charging Mode\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eF Solder pad unconnected: 4.2V Lithium Ion Battery Charging Mode\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdjustable Output Current:\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDefault Current: 1A ( 0.1 Ohms R100 resistor Soldered below SANYA label)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOutput Current: 1.5A (Solder 0.2 Ohms resistor below R100 resistor below SANYA label)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOutput Current: 2A (Solder 0.1 Ohms resistor below R100 resistor below SANYA label)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSet Output Current: 0.5A (Remove R100 resistor below SANYA, instead solder 0.2 Ohms resistor there)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdditional Heat Sink Required when Output Current more than 1A\u003c\/li\u003e\n\u003c\/ul\u003e"}
