This is a dual Gigabit ethernet 5G/4G base board from Waveshare, designed for the Raspberry Pi Compute Module 4 (not included).
This base board's main features are the dual-Gigabit Ethernet ports, allowing you to evaluate the CM4 as a controller for a custom router project. You'll need to compile your own software for this with very limited information from the manufacturer, so this is not intended for novice users!
There's also a slot for an SIM7000G-H M.2 B-Key 4G/5G module (not included) allowing the addition of LTE functionality for your project. Alongside this is a nano sim card slot option 5G/4G/3G/2G connectivity as well.
The board also features 2x USB 3.2 ports, an RTC and backup battery holder, fan header, 2x CSI and 1x DSI ports, 2 full-size HDMI ports and a Micro-SD card slot!
Base board only. Does not include the CM4, power supply or M.2 B-Key module. This allows you to choose your wireless and power options separately.
What's On-Board?
1) CM4 socket - suitable for all variants of Compute Module 4 2) 40-Pin GPIO header - For connecting sorts of HATs 3) Dual RJ45 Gigabit Ethernet - 10/100/1000M compatible - ETHERNET 0: CM4 original ETH - ETHERNET 1: USB extended ETH 4) HDMI connectors - 2x HDMI, supports 4K 30fps output 5) USB 3.2 ports - 2x USB 3.2 Gen1, for connecting sorts of USB devices 6) PWR & USB - DC power supply or USB programming port 7) Fan header - For connecting cooling fan, allows speed adjustment and measurement 8) Camera Port - 2x MIPI CSI camera ports 9) 4G/5G module status indicator - STA red: module enable indicator - NET green: module operating status indicator 10) CM4 status indicator - PWR red: Raspberry Pi power indicator - ACT green: Raspberry Pi operating status indicator 11) BOOT selection - ON: CM4 will be booted from USB-C interface - OFF: CM4 will be booted from eMMC or Micro SD card 12) Display Port - MIPI DSI display port 13) M.2 B KEY - Supports 4G/5G modules, or other communication modules using USB channel 14) Nano-SIM card slot - Supports standard Nano-SIM card for 5G/4G/3G/2G communication 15) Micro SD card slot - For connecting a Micro SD card with pre-burnt image (Lite variant ONLY) 16) RTC battery holder - Supports CR2032 button cell 17) RTC interruption configuration - PI-RUN: CM4 will reboot on RTC interruption - GL-EN: CM4 powerdown on RTC interruption - D4: D4 pin is triggered on RTC interruption (default) 18) IO-VREF selection - Set the CM4 IO logic level as 3.3V (default) or 1.8V 19) Fan power supply selection - Select 12V (default) or 5V power to drive the fan 20) RTC/FAN I2C bus selection - SDA0/SCL0: I2C-10 is shared with CSI/DSI (default) - GPIO3/2: I2C-1 is shared with 40-pin header 21) System function configuration - BT_DIS: Bluetooth disabled, for CM4 with antenna variant ONLY - WiFi_DIS: WiFi disabled, for CM4 with antenna variant ONLY - WP_DIS: boot mode switch, ONLY be used when NOT booted from eMMC or SD card 22) RTL8153 - USB Gigabit Ethernet chip
Careful, careful, no return policy once ordered, Monitor is very fragile
I order 15.6 inch monitor with built in stand for my Raspberry PI. The issue with built in stand, is that it is so fragile that a slight movement in cables the monitor will move and it can topple breaking the LCD panel. The stand does not help monitor to be in one place, not suitable for regular use.
Be careful before ordering this product as as the company does not accept returns and has not return policy, be careful careful careful.
This is Delhi based company which is importing items from China and selling without any return policy.
{"id":6733673431126,"title":"Dual Gigabit Ethernet 5G\/4G Base Board","handle":"dual-gigabit-ethernet-5g-4g-base-board-online","description":"\u003cp\u003eThis is a dual Gigabit ethernet 5G\/4G base board from Waveshare, designed for the Raspberry Pi Compute Module 4 (not included).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis base board's main features are the dual-Gigabit Ethernet ports, allowing you to evaluate the CM4 as a controller for a custom router project. You'll need to compile your own software for this with very limited information from the manufacturer, so this is not intended for novice users!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThere's also a slot for an \u003ca href=\"https:\/\/thinkrobotics.in\/products\/sim7600g-h-m-2-simcom-original-4g-lte-cat-4-module\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSIM7000G-H\u003c\/a\u003e M.2 B-Key 4G\/5G module (not included) allowing the addition of LTE functionality for your project. Alongside this is a nano sim card slot option 5G\/4G\/3G\/2G connectivity as well.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe board also features 2x USB 3.2 ports, an RTC and backup battery holder, fan header, 2x CSI and 1x DSI ports, 2 full-size HDMI ports and a Micro-SD card slot!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eBase board only. Does not include the CM4, power supply or M.2 B-Key module. This allows you to choose your wireless and power options separately.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-5.jpg?v=1648907246\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-7.jpg?v=1648907272\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-3.jpg?v=1648907386\"\u003e\u003c\/div\u003e\n\u003ch2 style=\"text-align: center;\"\u003eWhat's On-Board?\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-intro.jpg?v=1648907445\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cstrong\u003e1) CM4 socket\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - suitable for all variants of Compute Module 4\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e2) 40-Pin GPIO header\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - For connecting sorts of HATs\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e3) Dual RJ45 Gigabit Ethernet\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - 10\/100\/1000M compatible\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - ETHERNET 0: CM4 original ETH\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - ETHERNET 1: USB extended ETH\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e4) HDMI connectors\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - 2x HDMI, supports 4K 30fps output\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e5) USB 3.2 ports\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - 2x USB 3.2 Gen1, for connecting sorts of USB devices\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e6) PWR \u0026amp; USB\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - DC power supply or USB programming port\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e7) Fan header\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - For connecting cooling fan, allows speed adjustment and measurement\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e8) Camera Port\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - 2x MIPI CSI camera ports\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e9) 4G\/5G module status indicator\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - STA red: module enable indicator\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - NET green: module operating status indicator\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e10) CM4 status indicator\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - PWR red: Raspberry Pi power indicator\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - ACT green: Raspberry Pi operating status indicator\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e11) BOOT selection\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - ON: CM4 will be booted from USB-C interface\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - OFF: CM4 will be booted from eMMC or Micro SD card\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e12) Display Port\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - MIPI DSI display port\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e13) M.2 B KEY\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Supports 4G\/5G modules, or other communication modules using USB channel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e14) Nano-SIM card slot\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Supports standard Nano-SIM card for 5G\/4G\/3G\/2G communication\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e15) Micro SD card slot\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - For connecting a Micro SD card with pre-burnt image (Lite variant ONLY)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e16) RTC battery holder\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Supports CR2032 button cell\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e17) RTC interruption configuration\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - PI-RUN: CM4 will reboot on RTC interruption\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - GL-EN: CM4 powerdown on RTC interruption\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - D4: D4 pin is triggered on RTC interruption (default)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e18) IO-VREF selection\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Set the CM4 IO logic level as 3.3V (default) or 1.8V\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e19) Fan power supply selection\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Select 12V (default) or 5V power to drive the fan\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e20) RTC\/FAN I2C bus selection\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - SDA0\/SCL0: I2C-10 is shared with CSI\/DSI (default)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - GPIO3\/2: I2C-1 is shared with 40-pin header\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e21) System function configuration\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - BT_DIS: Bluetooth disabled, for CM4 with antenna variant ONLY\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - WiFi_DIS: WiFi disabled, for CM4 with antenna variant ONLY\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - WP_DIS: boot mode switch, ONLY be used when NOT booted from eMMC or SD card\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e22) RTL8153\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - USB Gigabit Ethernet chip\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-size.jpg?v=1648907767\"\u003e\u003c\/div\u003e","published_at":"2022-12-06T11:04:03+05:30","created_at":"2022-04-02T19:04:54+05:30","vendor":"Waveshare","type":"Single Board Computers","tags":["20885","B-Key","CM4","compute","compute module storage","dual","ethernet","Gigabit","M.2","raspberry","Raspberry Pi","raspberry pi 4","Raspberry pi 4 1GB","Raspberry pi 4 2GB","Raspberry pi 4 8GB","raspberry pi kit","RPI-BRDS","RPIACC","SBC2","WaveSH","WAVESHARE","WVSH"],"price":499999,"price_min":499999,"price_max":499999,"available":true,"price_varies":false,"compare_at_price":899999,"compare_at_price_min":899999,"compare_at_price_max":899999,"compare_at_price_varies":false,"variants":[{"id":39783133413462,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SBC2056","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dual Gigabit Ethernet 5G\/4G Base Board","public_title":null,"options":["Default Title"],"price":499999,"weight":70,"compare_at_price":899999,"inventory_management":"shopify","barcode":"SBC2056","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113546064067_1200x_jpg.webp?v=1648907198","\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113552650435_800x_jpg.webp?v=1648907198","\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113549078723_1200x_jpg.webp?v=1648907198","\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113547112643_1200x_jpg.webp?v=1648907198"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113546064067_1200x_jpg.webp?v=1648907198","options":["Title"],"media":[{"alt":"Dual Gigabit Ethernet 5G\/4G Base Board Online","id":22237101785174,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113546064067_1200x_jpg.webp?v=1648907198"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113546064067_1200x_jpg.webp?v=1648907198","width":1200},{"alt":"Dual Gigabit Ethernet 5G\/4G Base Board Online","id":22237101686870,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113552650435_800x_jpg.webp?v=1648907198"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113552650435_800x_jpg.webp?v=1648907198","width":800},{"alt":"Dual Gigabit Ethernet 5G\/4G Base Board Online","id":22237101719638,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113549078723_1200x_jpg.webp?v=1648907198"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113549078723_1200x_jpg.webp?v=1648907198","width":1200},{"alt":"Dual Gigabit Ethernet 5G\/4G Base Board Online","id":22237101752406,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113547112643_1200x_jpg.webp?v=1648907198"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/dual-gigabit-ethernet-5g-4g-base-board-for-raspberry-pi-cm4-waveshare-wav-20885-33113547112643_1200x_jpg.webp?v=1648907198","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis is a dual Gigabit ethernet 5G\/4G base board from Waveshare, designed for the Raspberry Pi Compute Module 4 (not included).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis base board's main features are the dual-Gigabit Ethernet ports, allowing you to evaluate the CM4 as a controller for a custom router project. You'll need to compile your own software for this with very limited information from the manufacturer, so this is not intended for novice users!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThere's also a slot for an \u003ca href=\"https:\/\/thinkrobotics.in\/products\/sim7600g-h-m-2-simcom-original-4g-lte-cat-4-module\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSIM7000G-H\u003c\/a\u003e M.2 B-Key 4G\/5G module (not included) allowing the addition of LTE functionality for your project. Alongside this is a nano sim card slot option 5G\/4G\/3G\/2G connectivity as well.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe board also features 2x USB 3.2 ports, an RTC and backup battery holder, fan header, 2x CSI and 1x DSI ports, 2 full-size HDMI ports and a Micro-SD card slot!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eBase board only. Does not include the CM4, power supply or M.2 B-Key module. This allows you to choose your wireless and power options separately.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-5.jpg?v=1648907246\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-7.jpg?v=1648907272\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-3.jpg?v=1648907386\"\u003e\u003c\/div\u003e\n\u003ch2 style=\"text-align: center;\"\u003eWhat's On-Board?\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-intro.jpg?v=1648907445\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cstrong\u003e1) CM4 socket\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - suitable for all variants of Compute Module 4\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e2) 40-Pin GPIO header\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - For connecting sorts of HATs\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e3) Dual RJ45 Gigabit Ethernet\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - 10\/100\/1000M compatible\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - ETHERNET 0: CM4 original ETH\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - ETHERNET 1: USB extended ETH\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e4) HDMI connectors\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - 2x HDMI, supports 4K 30fps output\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e5) USB 3.2 ports\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - 2x USB 3.2 Gen1, for connecting sorts of USB devices\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e6) PWR \u0026amp; USB\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - DC power supply or USB programming port\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e7) Fan header\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - For connecting cooling fan, allows speed adjustment and measurement\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e8) Camera Port\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - 2x MIPI CSI camera ports\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e9) 4G\/5G module status indicator\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - STA red: module enable indicator\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - NET green: module operating status indicator\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e10) CM4 status indicator\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - PWR red: Raspberry Pi power indicator\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - ACT green: Raspberry Pi operating status indicator\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e11) BOOT selection\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - ON: CM4 will be booted from USB-C interface\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - OFF: CM4 will be booted from eMMC or Micro SD card\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e12) Display Port\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - MIPI DSI display port\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e13) M.2 B KEY\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Supports 4G\/5G modules, or other communication modules using USB channel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e14) Nano-SIM card slot\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Supports standard Nano-SIM card for 5G\/4G\/3G\/2G communication\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e15) Micro SD card slot\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - For connecting a Micro SD card with pre-burnt image (Lite variant ONLY)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e16) RTC battery holder\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Supports CR2032 button cell\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e17) RTC interruption configuration\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - PI-RUN: CM4 will reboot on RTC interruption\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - GL-EN: CM4 powerdown on RTC interruption\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - D4: D4 pin is triggered on RTC interruption (default)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e18) IO-VREF selection\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Set the CM4 IO logic level as 3.3V (default) or 1.8V\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e19) Fan power supply selection\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - Select 12V (default) or 5V power to drive the fan\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e20) RTC\/FAN I2C bus selection\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - SDA0\/SCL0: I2C-10 is shared with CSI\/DSI (default)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - GPIO3\/2: I2C-1 is shared with 40-pin header\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e21) System function configuration\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - BT_DIS: Bluetooth disabled, for CM4 with antenna variant ONLY\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - WiFi_DIS: WiFi disabled, for CM4 with antenna variant ONLY\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e - WP_DIS: boot mode switch, ONLY be used when NOT booted from eMMC or SD card\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e22) RTL8153\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e - USB Gigabit Ethernet chip\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/CM4-DUAL-ETH-4G-5G-BASE-details-size.jpg?v=1648907767\"\u003e\u003c\/div\u003e"}
