Add more power to your robot with this metal-geared MG90S servo. The tiny little servo can rotate approximately 90 degrees (45 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places.
Please note, this servo will 'hold' the position even when no signal is sent!
To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE. Position "0" (1.5ms pulse) is middle, "90" (~2ms pulse) is all the way to the right, "-90" (~1ms pulse) is all the way to the left.
NOTE: Operating servos at or near Stall Torque is not recommended and will shorten the life of your servo drastically.
The product is really good, one of the best servos i have bought, built with really good material. Cheapest, compared to others. My order was shipped in just 2 days.
{"id":1417046622280,"title":"Mini Digital Metal Servo (MG90S)","handle":"sg5010-coreless-servo","description":"\u003cp\u003eAdd more power to your robot with this metal-geared MG90S servo. The tiny little servo can rotate approximately 90 degrees (45 in each direction), and works just like the standard kinds you're used to but \u003cem\u003esmaller\u003c\/em\u003e. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback \u0026amp; gear box, especially since it will fit in small places. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note, this servo will 'hold' the position even when no signal is sent!\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003eTo control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the \u003ca href=\"http:\/\/www.arduino.cc\/en\/Reference\/Servo\"\u003eServo library\u003c\/a\u003e included with the Arduino IDE. Position \"0\" (1.5ms pulse) is middle, \"90\" (~2ms pulse) is all the way to the right, \"-90\" (~1ms pulse) is all the way to the left.\u003c\/p\u003e\n\u003cp\u003eNOTE: Operating servos at or near Stall Torque is not recommended and will shorten the life of your servo drastically.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 13.4g\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimension: 22.8mm X 12.2mm X 28.5mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStall Torque: 1.8kg\/cm (4.8V); 2.2kg\/cm (6.6V)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOperating Speed: 0.10sec\/60degree (4.8V); 0.08sec\/60degree (6.0V)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOperating Voltage: 4.8V ~ 6.6V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTemperature range: 0℃ to 55℃\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDead Band Width: 1us\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePower Supply: Through External Adapter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eServo Wire Length: 25 cm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eServo Arms \u0026amp; Screws included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/MOT4007_480x480.jpg?v=1592157375\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Servo_480x480.png?v=1592058892\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eResources\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/MOTORS\/MOT4007\"\u003e\u003cspan\u003eDatasheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/LIBRARIES\/tree\/master\/MOTORS\/MOT4007\"\u003e\u003cspan\u003eLibrary\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/SAMPLE_CODE\/tree\/master\/MOTORS\/MOT4007\"\u003e\u003cspan\u003eSample Code\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eTutorial\u003c\/span\u003e\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/opqzqSHmBmw\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/bD7rQbnSbek\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2022-12-06T11:27:25+05:30","created_at":"2018-09-01T15:47:35+05:30","vendor":"ThinkRobotics.in","type":"Servo Motor","tags":["180 Degree Turn","Digital Servo","MG90S","MOT4","Motor","Servo Motor","SERVO-MTR","Standard Servo"],"price":25999,"price_min":25999,"price_max":25999,"available":true,"price_varies":false,"compare_at_price":42900,"compare_at_price_min":42900,"compare_at_price_max":42900,"compare_at_price_varies":false,"variants":[{"id":12744981708872,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MOT4007","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mini Digital Metal Servo (MG90S)","public_title":null,"options":["Default Title"],"price":25999,"weight":25,"compare_at_price":42900,"inventory_management":"shopify","barcode":"12744981708872","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/mg90s-micro-servo-motor_1200x1200_f992b7af-ba19-40f3-aa4c-0abb69f5eb41.png?v=1638729646","\/\/thinkrobotics.com\/cdn\/shop\/products\/towerpro-mg90s-servo-motor-800x800.jpg?v=1638729646","\/\/thinkrobotics.com\/cdn\/shop\/products\/MG90S_Dimensions.png?v=1638729646"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/mg90s-micro-servo-motor_1200x1200_f992b7af-ba19-40f3-aa4c-0abb69f5eb41.png?v=1638729646","options":["Title"],"media":[{"alt":"Mini Digital Metal Servo","id":21686664134742,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/mg90s-micro-servo-motor_1200x1200_f992b7af-ba19-40f3-aa4c-0abb69f5eb41.png?v=1638729646"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/mg90s-micro-servo-motor_1200x1200_f992b7af-ba19-40f3-aa4c-0abb69f5eb41.png?v=1638729646","width":800},{"alt":"Mini Digital Metal Servo","id":21686664036438,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/towerpro-mg90s-servo-motor-800x800.jpg?v=1638729646"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/towerpro-mg90s-servo-motor-800x800.jpg?v=1638729646","width":800},{"alt":"Mini Digital Metal Servo","id":706634219592,"position":3,"preview_image":{"aspect_ratio":1.997,"height":623,"width":1244,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/MG90S_Dimensions.png?v=1638729646"},"aspect_ratio":1.997,"height":623,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/MG90S_Dimensions.png?v=1638729646","width":1244}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eAdd more power to your robot with this metal-geared MG90S servo. The tiny little servo can rotate approximately 90 degrees (45 in each direction), and works just like the standard kinds you're used to but \u003cem\u003esmaller\u003c\/em\u003e. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback \u0026amp; gear box, especially since it will fit in small places. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note, this servo will 'hold' the position even when no signal is sent!\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003eTo control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the \u003ca href=\"http:\/\/www.arduino.cc\/en\/Reference\/Servo\"\u003eServo library\u003c\/a\u003e included with the Arduino IDE. Position \"0\" (1.5ms pulse) is middle, \"90\" (~2ms pulse) is all the way to the right, \"-90\" (~1ms pulse) is all the way to the left.\u003c\/p\u003e\n\u003cp\u003eNOTE: Operating servos at or near Stall Torque is not recommended and will shorten the life of your servo drastically.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 13.4g\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimension: 22.8mm X 12.2mm X 28.5mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStall Torque: 1.8kg\/cm (4.8V); 2.2kg\/cm (6.6V)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOperating Speed: 0.10sec\/60degree (4.8V); 0.08sec\/60degree (6.0V)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOperating Voltage: 4.8V ~ 6.6V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTemperature range: 0℃ to 55℃\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDead Band Width: 1us\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePower Supply: Through External Adapter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eServo Wire Length: 25 cm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eServo Arms \u0026amp; Screws included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/MOT4007_480x480.jpg?v=1592157375\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Servo_480x480.png?v=1592058892\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eResources\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/MOTORS\/MOT4007\"\u003e\u003cspan\u003eDatasheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/LIBRARIES\/tree\/master\/MOTORS\/MOT4007\"\u003e\u003cspan\u003eLibrary\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/SAMPLE_CODE\/tree\/master\/MOTORS\/MOT4007\"\u003e\u003cspan\u003eSample Code\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eTutorial\u003c\/span\u003e\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/opqzqSHmBmw\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/bD7rQbnSbek\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp\u003e \u003c\/p\u003e"}
