The 1501 MG is a metal-geared analog servo from Power HD that delivers extra-high torque normally associated with much more expensive or larger servos. This is one of our most popular standard-size servos. Servo horns and associated hardware are included.
The HD-1501 MG is a powerful standard-size servo that features metal gears and two ball bearings and can deliver a tremendous amount of torque for such a high-speed servo. The 1501 MG works with standard RC servo pulses, providing a running angle of approximately 165° over a servo pulse range of 800 µs to 2200 µs, and it has a 10″ (25 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible.
The default servo pulse widths (usually 1ms to 2ms) may not give you a full 180 degrees of motion. In that case, check if you can set your servo controller to custom pulse lengths and try 0.75ms to 2.25ms. You can try shorter/longer pulses but be aware that if you go too far you could break your servo!
NOTE: Operating servos close to or at stall torque reduces their life and will permanently damage them beyond repair.
{"id":1417109667912,"title":"Large Metal Servo (Power HD 1501MG)","handle":"standard-metal-servo-mg946r","description":"\u003cp\u003e\u003cspan\u003eThe 1501 MG is a metal-geared analog servo from Power HD that delivers extra-high torque normally associated with much more expensive or larger servos. This is one of our most popular standard-size servos. Servo horns and associated hardware are included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe HD-1501 MG is a powerful standard-size servo that features metal gears and two ball bearings and can deliver a tremendous amount of torque for such a high-speed servo\u003c\/span\u003e\u003cspan\u003e. The 1501 MG works with standard RC servo pulses, providing a running angle of approximately 165° over a servo pulse range of 800 µs to 2200 µs, and it has a 10″ (25 cm) cable that is terminated with a standard \u003c\/span\u003eJR-style connector\u003cspan\u003e, which is Futaba-compatible.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe default servo pulse widths (usually 1ms to 2ms) may not give you a full 180 degrees of motion. In that case, check if you can set your servo controller to custom pulse lengths and try 0.75ms to 2.25ms. You can try shorter\/longer pulses but be aware that if you go too far you could break your servo!\u003c\/p\u003e\n\u003cp\u003eNOTE: Operating servos close to or at stall torque reduces their life and will permanently damage them beyond repair.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 63g\u003c\/li\u003e\n\u003cli\u003eDimension: 40.7mm X 20.5mm X 39.5mm\u003c\/li\u003e\n\u003cli\u003eStall Torque: 15.5 kg-cm (4.8V); 17.0 kg-cm (6V)\u003c\/li\u003e\n\u003cli\u003eOperating Speed: 0.16sec\/60degree (4.8V); 0.14sec\/60degree (6.0V)\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 4.8V ~ 6.6V\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBearing Type: Ball Bearing x 2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMotor Type: DC Motor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eGear Type: Copper\u003c\/span\u003eTemperature Range: -20℃ - +60℃\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorking Frequency：1520μs \/ 50Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eServo Wire Length: 32cm\u003c\/li\u003e\n\u003cli\u003eCurrent Draw at idle: 10mA\u003c\/li\u003e\n\u003cli\u003eNo Load Operating Current: 170mA\u003c\/li\u003e\n\u003cli\u003eStall Current: 1.2A\u003c\/li\u003e\n\u003cli\u003eServo Arms and Screws included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/MOT4001_480x480.jpg?v=1592057006\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch5\u003eResources\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/MOTORS\/MOT4001\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/LIBRARIES\/tree\/master\/MOTORS\/MOT4001\"\u003eLibrary \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/SAMPLE_CODE\/tree\/master\/MOTORS\/MOT4001\"\u003eSample Code\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTutorial\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/j9b4nwLkOt4\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/_sKfckMukGw\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2022-12-06T11:27:17+05:30","created_at":"2018-09-01T16:53:15+05:30","vendor":"ThinkRobotics.in","type":"Servo Motor","tags":["1501MG","Digital Servo","Large Servo","Metal Servo","MOT4","Power HD","Power HD 1501MG","PowerHD","Servo","Servo Motor","SERVO-MTR"],"price":235999,"price_min":235999,"price_max":235999,"available":false,"price_varies":false,"compare_at_price":320000,"compare_at_price_min":320000,"compare_at_price_max":320000,"compare_at_price_varies":false,"variants":[{"id":12745339306056,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MOT4001","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Large Metal Servo (Power HD 1501MG)","public_title":null,"options":["Default Title"],"price":235999,"weight":90,"compare_at_price":320000,"inventory_management":"shopify","barcode":"12745339306056","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_4189.jpg?v=1577794113"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_4189.jpg?v=1577794113","options":["Title"],"media":[{"alt":"Large Metal Servo","id":757399879752,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2800,"width":2800,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_4189.jpg?v=1577794113"},"aspect_ratio":1.0,"height":2800,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_4189.jpg?v=1577794113","width":2800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThe 1501 MG is a metal-geared analog servo from Power HD that delivers extra-high torque normally associated with much more expensive or larger servos. This is one of our most popular standard-size servos. Servo horns and associated hardware are included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe HD-1501 MG is a powerful standard-size servo that features metal gears and two ball bearings and can deliver a tremendous amount of torque for such a high-speed servo\u003c\/span\u003e\u003cspan\u003e. The 1501 MG works with standard RC servo pulses, providing a running angle of approximately 165° over a servo pulse range of 800 µs to 2200 µs, and it has a 10″ (25 cm) cable that is terminated with a standard \u003c\/span\u003eJR-style connector\u003cspan\u003e, which is Futaba-compatible.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe default servo pulse widths (usually 1ms to 2ms) may not give you a full 180 degrees of motion. In that case, check if you can set your servo controller to custom pulse lengths and try 0.75ms to 2.25ms. You can try shorter\/longer pulses but be aware that if you go too far you could break your servo!\u003c\/p\u003e\n\u003cp\u003eNOTE: Operating servos close to or at stall torque reduces their life and will permanently damage them beyond repair.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 63g\u003c\/li\u003e\n\u003cli\u003eDimension: 40.7mm X 20.5mm X 39.5mm\u003c\/li\u003e\n\u003cli\u003eStall Torque: 15.5 kg-cm (4.8V); 17.0 kg-cm (6V)\u003c\/li\u003e\n\u003cli\u003eOperating Speed: 0.16sec\/60degree (4.8V); 0.14sec\/60degree (6.0V)\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 4.8V ~ 6.6V\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBearing Type: Ball Bearing x 2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMotor Type: DC Motor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eGear Type: Copper\u003c\/span\u003eTemperature Range: -20℃ - +60℃\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorking Frequency：1520μs \/ 50Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eServo Wire Length: 32cm\u003c\/li\u003e\n\u003cli\u003eCurrent Draw at idle: 10mA\u003c\/li\u003e\n\u003cli\u003eNo Load Operating Current: 170mA\u003c\/li\u003e\n\u003cli\u003eStall Current: 1.2A\u003c\/li\u003e\n\u003cli\u003eServo Arms and Screws included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/MOT4001_480x480.jpg?v=1592057006\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch5\u003eResources\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/MOTORS\/MOT4001\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/LIBRARIES\/tree\/master\/MOTORS\/MOT4001\"\u003eLibrary \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/SAMPLE_CODE\/tree\/master\/MOTORS\/MOT4001\"\u003eSample Code\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTutorial\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/j9b4nwLkOt4\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/_sKfckMukGw\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e \u003c\/p\u003e"}
