Compatible with the Arduino line of products. Trademark registrations throughout the world for ARDUINO or Arduino® are owned by: Arduino AG, and Arduino SA.
For Arduino Nano, IO Expansion Shield is specifically designed to facilitate an easy connection between Arduino Nano and many other devices. In essence, it expands the Nano controller to link those devices in a simple and trouble-free manner. It is a perfect companion to the Nano breadboard and compatible with both Nano v2.x and v3.x.
This expansion shield provides:
14 I/O Pin (servo type with GND, power and signal)
8 analog Pin with power output and GND
6 PWM Pin
1 Servo power input
5 I2C expansion Pin
AREF output
3.3V output
Specifications
Designed for Arduino Nano, compatible with:
Arduino Nano(Original)
Arduino Nano CH340(Compatible)
Expanded all 22 GPIO pins to SVG 3-way(RC servo type) header pin, including:
8 Analog Pins (Arduino NANO have 2 additional Analog input pin)
14 Digital IO pins (include 6 PWMs)
AREF pin too
I2C expansion Pin (4-way header: SCL, SCK, 5V and GND)
UART expansion pin (4-way header: RX, TX, 5V and GND)
More 5V and GND pins for sensor / Servo
Additional pads for Arduino UNO form factor.
On board additional 3.3V voltage regulator to supply more 3.3V current.
DC Adapter Barrel Jack input with reverse polarity protection
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Shopping Cart
{"id":4587485954134,"title":"I\/O Expansion Shield Module","handle":"i-o-expansion-shield-module-for-arduino-nano-online","description":"\u003cp\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.4c15594elrbKK2\"\u003eCompatible with the Arduino line of products. Trademark registrations throughout the world for ARDUINO or Arduino® are owned by: Arduino AG, and Arduino SA. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.4c15594elrbKK2\"\u003eFor Arduino Nano, IO Expansion Shield is specifically designed to facilitate an easy connection between Arduino Nano and many other devices. In essence, it expands the Nano controller to link those devices in a simple and trouble-free manner. It is a perfect companion to the Nano breadboard and compatible with both Nano v2.x and v3.x.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eThis expansion shield provides:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e14 I\/O Pin (servo type with GND, power and signal)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e8 analog Pin with power output and GND\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e6 PWM Pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 Servo power input\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e5 I2C expansion Pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAREF output\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3.3V output\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Arduino Nano, compatible with:\n\u003cul\u003e\n\u003cli\u003eArduino Nano\u003cspan\u003e \u003c\/span\u003e(Original)\u003c\/li\u003e\n\u003cli\u003eArduino Nano CH340\u003cspan\u003e \u003c\/span\u003e(Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eExpanded all 22 GPIO pins to SVG 3-way(RC servo type) header pin, including:\n\u003cul\u003e\n\u003cli\u003e8 Analog Pins (Arduino NANO have 2 additional Analog input pin)\u003c\/li\u003e\n\u003cli\u003e14 Digital IO pins (include 6 PWMs)\u003c\/li\u003e\n\u003cli\u003eAREF pin too\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eI2C expansion Pin (4-way header: SCL, SCK, 5V and GND)\u003c\/li\u003e\n\u003cli\u003eUART expansion pin (4-way header: RX, TX, 5V and GND)\u003c\/li\u003e\n\u003cli\u003eMore 5V and GND pins for sensor \/ Servo\u003c\/li\u003e\n\u003cli\u003eAdditional pads for Arduino UNO form factor.\u003c\/li\u003e\n\u003cli\u003eOn board additional 3.3V voltage regulator to supply more 3.3V current.\u003c\/li\u003e\n\u003cli\u003eDC Adapter Barrel Jack input with reverse polarity protection\u003c\/li\u003e\n\u003cli\u003eAdditional Reset button\u003c\/li\u003e\n\u003cli\u003ePower indicator LED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/ARD2011_480x480.jpg?v=1592238304\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/protosupplies.com\/wp-content\/uploads\/2018\/07\/Nano-Expansion-Adapter.png\" width=\"503\" height=\"377\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eResources\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ARDUINO\/ARD2011\"\u003e\u003cspan\u003eDatasheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/SAMPLE_CODE\/tree\/master\/ARDUINO\/ARD2011\"\u003e\u003cspan\u003eSample Code\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eTutorial\u003c\/span\u003e\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/4eDifms0jsI\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/4QD80OtV3MI\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2022-12-06T11:18:10+05:30","created_at":"2020-03-15T20:40:18+05:30","vendor":"ThinkRobotics","type":"Arduino","tags":["ARD-SHLD","ARD2","Arduino Nano","Arduino Shield","Nano","Nano Expansion","nano expansion board","ZOHO UPDATED"],"price":14999,"price_min":14999,"price_max":14999,"available":true,"price_varies":false,"compare_at_price":19900,"compare_at_price_min":19900,"compare_at_price_max":19900,"compare_at_price_varies":false,"variants":[{"id":32048171548758,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ARD2011","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"I\/O Expansion Shield Module","public_title":null,"options":["Default Title"],"price":14999,"weight":50,"compare_at_price":19900,"inventory_management":"shopify","barcode":"ARD2011","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/20191118_145538.jpg?v=1584285020","\/\/thinkrobotics.com\/cdn\/shop\/products\/20191118_145547.jpg?v=1584285020","\/\/thinkrobotics.com\/cdn\/shop\/products\/20191118_145604.jpg?v=1584285022","\/\/thinkrobotics.com\/cdn\/shop\/products\/20191118_150021.jpg?v=1584285022"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20191118_145538.jpg?v=1584285020","options":["Title"],"media":[{"alt":"I\/O Expansion Shield Module For Arduino Nano Online","id":6668876906582,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1418,"width":1891,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20191118_145538.jpg?v=1584285020"},"aspect_ratio":1.334,"height":1418,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20191118_145538.jpg?v=1584285020","width":1891},{"alt":"I\/O Expansion Shield Module For Arduino Nano Online","id":6668876939350,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1946,"width":2595,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20191118_145547.jpg?v=1584285020"},"aspect_ratio":1.334,"height":1946,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20191118_145547.jpg?v=1584285020","width":2595},{"alt":"I\/O Expansion Shield Module For Arduino Nano Online","id":6668876972118,"position":3,"preview_image":{"aspect_ratio":1.333,"height":3024,"width":4032,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20191118_145604.jpg?v=1584285022"},"aspect_ratio":1.333,"height":3024,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20191118_145604.jpg?v=1584285022","width":4032},{"alt":"I\/O Expansion Shield Module For Arduino Nano Online","id":6668877004886,"position":4,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20191118_150021.jpg?v=1584285022"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/20191118_150021.jpg?v=1584285022","width":3024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.4c15594elrbKK2\"\u003eCompatible with the Arduino line of products. Trademark registrations throughout the world for ARDUINO or Arduino® are owned by: Arduino AG, and Arduino SA. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.4c15594elrbKK2\"\u003eFor Arduino Nano, IO Expansion Shield is specifically designed to facilitate an easy connection between Arduino Nano and many other devices. In essence, it expands the Nano controller to link those devices in a simple and trouble-free manner. It is a perfect companion to the Nano breadboard and compatible with both Nano v2.x and v3.x.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eThis expansion shield provides:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e14 I\/O Pin (servo type with GND, power and signal)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e8 analog Pin with power output and GND\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e6 PWM Pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 Servo power input\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e5 I2C expansion Pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAREF output\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3.3V output\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Arduino Nano, compatible with:\n\u003cul\u003e\n\u003cli\u003eArduino Nano\u003cspan\u003e \u003c\/span\u003e(Original)\u003c\/li\u003e\n\u003cli\u003eArduino Nano CH340\u003cspan\u003e \u003c\/span\u003e(Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eExpanded all 22 GPIO pins to SVG 3-way(RC servo type) header pin, including:\n\u003cul\u003e\n\u003cli\u003e8 Analog Pins (Arduino NANO have 2 additional Analog input pin)\u003c\/li\u003e\n\u003cli\u003e14 Digital IO pins (include 6 PWMs)\u003c\/li\u003e\n\u003cli\u003eAREF pin too\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eI2C expansion Pin (4-way header: SCL, SCK, 5V and GND)\u003c\/li\u003e\n\u003cli\u003eUART expansion pin (4-way header: RX, TX, 5V and GND)\u003c\/li\u003e\n\u003cli\u003eMore 5V and GND pins for sensor \/ Servo\u003c\/li\u003e\n\u003cli\u003eAdditional pads for Arduino UNO form factor.\u003c\/li\u003e\n\u003cli\u003eOn board additional 3.3V voltage regulator to supply more 3.3V current.\u003c\/li\u003e\n\u003cli\u003eDC Adapter Barrel Jack input with reverse polarity protection\u003c\/li\u003e\n\u003cli\u003eAdditional Reset button\u003c\/li\u003e\n\u003cli\u003ePower indicator LED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/ARD2011_480x480.jpg?v=1592238304\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/protosupplies.com\/wp-content\/uploads\/2018\/07\/Nano-Expansion-Adapter.png\" width=\"503\" height=\"377\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eResources\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ARDUINO\/ARD2011\"\u003e\u003cspan\u003eDatasheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/SAMPLE_CODE\/tree\/master\/ARDUINO\/ARD2011\"\u003e\u003cspan\u003eSample Code\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eTutorial\u003c\/span\u003e\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/4eDifms0jsI\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/4QD80OtV3MI\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e \u003c\/p\u003e"}
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
Team is suppotive and solves all the queries .
The product is good and will surely help me in my project...looking forward for more trades with think robotics.
