With a function of being directly plugged into the satellite receiver(It needn't conversion cable) Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM. 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer. Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance. Software support for Windows, for mac and Linux. Direct high speed USB support with no drivers required, a truly plug and play device or spektrum satellite receiver support. Futaba S-BUS hardware support. Innovative Flexi-port technology for superior port flexibility. 4Mbits on-board EEPROM for configuration storage.
Flexiport CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs.
Superior user experience OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe.
Specifications
3-axis Gupports several common RC inputs: 6 PWM channels, combined PPM, for spektrum/JR DSM2,
Supports several common RC inputs: 6 PWM channels, combined PPM, for spektrum/JR DSM2, DSMJ, for satellites, and Futaba S.Bus receivers.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Shopping Cart
{"id":4841870295126,"title":"CC3D EVO","handle":"cc3d-evo-flight-controller-online","description":"\u003cp\u003eWith a function of being directly plugged into the satellite receiver(It needn't conversion cable) Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM. 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer. Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance. Software support for Windows, for mac and Linux. Direct high speed USB support with no drivers required, a truly plug and play device or spektrum satellite receiver support. Futaba S-BUS hardware support. Innovative Flexi-port technology for superior port flexibility. 4Mbits on-board EEPROM for configuration storage.\u003cbr\u003e \u003cbr\u003eFlexiport\u003cbr\u003eCopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs.\u003cbr\u003e \u003cbr\u003eSuperior user experience\u003cbr\u003eOpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e3-axis Gupports several common RC inputs: 6 PWM channels, combined PPM, for spektrum\/JR DSM2,\u003c\/li\u003e\n\u003cli\u003eSupports several common RC inputs: 6 PWM channels, combined PPM, for spektrum\/JR DSM2, DSMJ, for satellites, and Futaba S.Bus receivers.\u003c\/li\u003e\n\u003cli\u003eSimultaneous support for multiple receivers.\u003c\/li\u003e\n\u003cli\u003eReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels\u003c\/li\u003e\n\u003cli\u003eMainPort functions (configurable): serial telemetry (default), GPS, S.Bus, for spektrum\/JR satellites\u003c\/li\u003e\n\u003cli\u003eFlexiPort (configurable): serial telemetry, GPS, for spektrum\/JR satellites, or I2C peripherals (under development)\u003c\/li\u003e\n\u003cli\u003e10 PWM outputs to servos or ESC's, or for camera stabilization\u003c\/li\u003e\n\u003cli\u003eCamera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers.\u003c\/li\u003e\n\u003cli\u003eOnboard USB connectivity for easy configuration.\u003c\/li\u003e\n\u003cli\u003eUSB and serial telemetry and configuration\u003c\/li\u003e\n\u003cli\u003eSupported by powerful OpenPilot GCS\u003c\/li\u003e\n\u003cli\u003e4 Mbit onboard memory\u003c\/li\u003e\n\u003cli\u003e3C Quaternion based complementary filter running at 500Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eResources\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/DRONE\/DRO2011\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTutorial\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ZK7IkctChu8\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/OKMOifCn_xA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2022-12-06T11:17:12+05:30","created_at":"2020-08-09T15:01:33+05:30","vendor":"ThinkRobotics","type":"Drone \u0026 Drone Accessories","tags":["controller","DRN-CTRL","DRO2","drone","flight","flight controller","microcontroller","remote","Remote Controller"],"price":119999,"price_min":119999,"price_max":169999,"available":false,"price_varies":true,"compare_at_price":149999,"compare_at_price_min":149999,"compare_at_price_max":199999,"compare_at_price_varies":true,"variants":[{"id":33130617208918,"title":"CC3D EVO","option1":"CC3D EVO","option2":null,"option3":null,"sku":"DRO2012","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"CC3D EVO - CC3D EVO","public_title":"CC3D EVO","options":["CC3D EVO"],"price":119999,"weight":140,"compare_at_price":149999,"inventory_management":"shopify","barcode":"DRO2012","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":33130617241686,"title":"CC3D EVO with Mini OP GPS","option1":"CC3D EVO with Mini OP GPS","option2":null,"option3":null,"sku":"DRO2013","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"CC3D EVO - CC3D EVO with Mini OP GPS","public_title":"CC3D EVO with Mini OP GPS","options":["CC3D EVO with Mini OP GPS"],"price":169999,"weight":140,"compare_at_price":199999,"inventory_management":"shopify","barcode":"DRO2013","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/2_H49f85131d2ba45e784d6e01882d44e36U.png?v=1596965496","\/\/thinkrobotics.com\/cdn\/shop\/products\/3_H99c2c78461ba4420aed7e88ccde19daao.png?v=1596965496","\/\/thinkrobotics.com\/cdn\/shop\/products\/4_Hc51f08e4dc4341fcbee8136f61a4a6f7W.png?v=1596965496","\/\/thinkrobotics.com\/cdn\/shop\/products\/5_Ha28faca46a764a82ba22738715e3109aj.png?v=1596965496","\/\/thinkrobotics.com\/cdn\/shop\/products\/6_H19546eeea94b4a1ab16063ac652ecd22W.png?v=1596965496","\/\/thinkrobotics.com\/cdn\/shop\/products\/7_Hdc562a892a4c4875bfb0c9220ce97fd0T.png?v=1596965496"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/2_H49f85131d2ba45e784d6e01882d44e36U.png?v=1596965496","options":["Title"],"media":[{"alt":"CC3D EVO Flight Controller Online","id":7768387715158,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/2_H49f85131d2ba45e784d6e01882d44e36U.png?v=1596965496"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/2_H49f85131d2ba45e784d6e01882d44e36U.png?v=1596965496","width":1000},{"alt":"CC3D EVO Flight Controller Online","id":7768387747926,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3_H99c2c78461ba4420aed7e88ccde19daao.png?v=1596965496"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3_H99c2c78461ba4420aed7e88ccde19daao.png?v=1596965496","width":1000},{"alt":"CC3D EVO Flight Controller Online","id":7768387780694,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/4_Hc51f08e4dc4341fcbee8136f61a4a6f7W.png?v=1596965496"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/4_Hc51f08e4dc4341fcbee8136f61a4a6f7W.png?v=1596965496","width":1000},{"alt":"CC3D EVO Flight Controller Online","id":7768387813462,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/5_Ha28faca46a764a82ba22738715e3109aj.png?v=1596965496"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/5_Ha28faca46a764a82ba22738715e3109aj.png?v=1596965496","width":1000},{"alt":"CC3D EVO Flight Controller Online","id":7768387846230,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/6_H19546eeea94b4a1ab16063ac652ecd22W.png?v=1596965496"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/6_H19546eeea94b4a1ab16063ac652ecd22W.png?v=1596965496","width":1000},{"alt":"CC3D EVO Flight Controller Online","id":7768387878998,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/7_Hdc562a892a4c4875bfb0c9220ce97fd0T.png?v=1596965496"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/7_Hdc562a892a4c4875bfb0c9220ce97fd0T.png?v=1596965496","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eWith a function of being directly plugged into the satellite receiver(It needn't conversion cable) Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM. 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer. Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance. Software support for Windows, for mac and Linux. Direct high speed USB support with no drivers required, a truly plug and play device or spektrum satellite receiver support. Futaba S-BUS hardware support. Innovative Flexi-port technology for superior port flexibility. 4Mbits on-board EEPROM for configuration storage.\u003cbr\u003e \u003cbr\u003eFlexiport\u003cbr\u003eCopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs.\u003cbr\u003e \u003cbr\u003eSuperior user experience\u003cbr\u003eOpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e3-axis Gupports several common RC inputs: 6 PWM channels, combined PPM, for spektrum\/JR DSM2,\u003c\/li\u003e\n\u003cli\u003eSupports several common RC inputs: 6 PWM channels, combined PPM, for spektrum\/JR DSM2, DSMJ, for satellites, and Futaba S.Bus receivers.\u003c\/li\u003e\n\u003cli\u003eSimultaneous support for multiple receivers.\u003c\/li\u003e\n\u003cli\u003eReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels\u003c\/li\u003e\n\u003cli\u003eMainPort functions (configurable): serial telemetry (default), GPS, S.Bus, for spektrum\/JR satellites\u003c\/li\u003e\n\u003cli\u003eFlexiPort (configurable): serial telemetry, GPS, for spektrum\/JR satellites, or I2C peripherals (under development)\u003c\/li\u003e\n\u003cli\u003e10 PWM outputs to servos or ESC's, or for camera stabilization\u003c\/li\u003e\n\u003cli\u003eCamera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers.\u003c\/li\u003e\n\u003cli\u003eOnboard USB connectivity for easy configuration.\u003c\/li\u003e\n\u003cli\u003eUSB and serial telemetry and configuration\u003c\/li\u003e\n\u003cli\u003eSupported by powerful OpenPilot GCS\u003c\/li\u003e\n\u003cli\u003e4 Mbit onboard memory\u003c\/li\u003e\n\u003cli\u003e3C Quaternion based complementary filter running at 500Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eResources\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/DRONE\/DRO2011\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTutorial\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ZK7IkctChu8\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/OKMOifCn_xA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e \u003c\/p\u003e"}
{
"product_id": 4841870295126,
"variant_id" : 33130617241686,
"variant_available" : false,
"inventory_quantity" : 0,
"inventory_management" : "shopify",
"inventory_policy" : "deny",
"image": "//thinkrobotics.com/cdn/shop/products/2_H49f85131d2ba45e784d6e01882d44e36U.png?v=1596965496",
"price": "169999",
"title": "CC3D EVO with Mini OP GPS",
"value": "CC3D EVO with Mini OP GPS"
}
Careful, careful, no return policy once ordered, Monitor is very fragile
I order 15.6 inch monitor with built in stand for my Raspberry PI. The issue with built in stand, is that it is so fragile that a slight movement in cables the monitor will move and it can topple breaking the LCD panel. The stand does not help monitor to be in one place, not suitable for regular use.
Be careful before ordering this product as as the company does not accept returns and has not return policy, be careful careful careful.
This is Delhi based company which is importing items from China and selling without any return policy.
