WHAT:Magigoo Pro-Flex is designed for professional use, to work exclusively with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer and TPC (thermoplastic copolyester) filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.
WHY:
TPUs, TPEs/TPCs describe a group of polymers that are sometimes referred to as thermoplastic rubbers. Thermoplastic rubbers exist as co-polymers or a polymer blend, generally of a plastic and a rubber. This imparts both thermoplastic and elastomeric properties. As a result, these materials have the advantage of being able to stretch to moderate elongations and returning to the original shape.
Additionally, these materials have very good thermal properties, material stability, chemical resistance, and are more cost-effective to produce. As a result, these materials are highly sought in industrial applications.
Some flexible filaments show lower adhesion to conventional 3D-printing build surfaces and a high tendency to warp. Others tend to stick too well to bare 3D printing surfaces such as glass and PEI. Magigoo Pro-Flex is a specialized solution for FDM printing of flexible filaments which was developed to work with a wide number of flexible filament types. Magigoo Pro-Flex acts as an intermediate layer between the build-plate and the printed part enabling good adhesion and facilitating print removal as required.
How
HOW:
Magigoo Pro-Flex has been designed and tested to work with different flexible filament brands.
Shakethe bottle.
Applyto the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.
Printaccording to the filament/printer manufacturers recommendations
Allow to cool and Remove. The print should pop right off
Clean- Use a damp cloth to wipe off.
Safety & Tips
SAFETY:
Using this product with other than Flexible type filaments might cause over adhesion and damage your build surface.
Tips:
For larger prints and filaments with a high shrinkage rate, a 20 mm brim is recommended.
In cases of excess adhesion, it is recommended to wet print bed with a small amount of water slowly work it below the part, this should make part removal easier.
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
Team is suppotive and solves all the queries .
The product is good and will surely help me in my project...looking forward for more trades with think robotics.
{"id":6613857435734,"title":"Magigoo Pro Flex - 3d printing glue","handle":"magigoo-pro-flex-3d-priniting","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWHAT:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eMagigoo Pro-Flex is designed for professional use, to work exclusively with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer and TPC (thermoplastic copolyester) filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWHY:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTPUs, TPEs\/TPCs describe a group of polymers that are sometimes referred to as thermoplastic rubbers. Thermoplastic rubbers exist as co-polymers or a polymer blend, generally of a plastic and a rubber. This imparts both thermoplastic and elastomeric properties. As a result, these materials have the advantage of being able to stretch to moderate elongations and returning to the original shape.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAdditionally, these materials have very good thermal properties, material stability, chemical resistance, and are more cost-effective to produce. As a result, these materials are highly sought in industrial applications.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSome flexible filaments show lower adhesion to conventional 3D-printing build surfaces and a high tendency to warp. Others tend to stick too well to bare 3D printing surfaces such as glass and PEI. Magigoo Pro-Flex is a specialized solution for FDM printing of flexible filaments which was developed to work with a wide number of flexible filament types. Magigoo Pro-Flex acts as an intermediate layer between the build-plate and the printed part enabling good adhesion and facilitating print removal as required.\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eHow\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHOW:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMagigoo Pro-Flex has been designed and tested to work with different flexible filament brands.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe bottle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eaccording to the filament\/printer manufacturers recommendations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow to cool and Remove\u003c\/strong\u003e. The print should pop right off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Use a damp cloth to wipe off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSafety \u0026amp; Tips\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSAFETY:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUsing this product with other than Flexible type filaments might cause over adhesion and damage your build surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor larger prints and filaments with a high shrinkage rate, a 20 mm brim is recommended.\u003c\/p\u003e\n\u003cp\u003eIn cases of excess adhesion, it is recommended to wet print bed with a small amount of water slowly work it below the part, this should make part removal easier.\u003c\/p\u003e","published_at":"2022-12-06T11:12:36+05:30","created_at":"2021-08-07T13:28:14+05:30","vendor":"Magigoo","type":"3D Printer Products","tags":["3d print adhesive","3d print glue","3D Printed","3D Printed Product","3D Printed Products","3D Printer","3d printer filament","3d printer glue","3D printing","3d printing adhesive","3d printing glue","3D-GLUE","3D9","Adhesive","glue","magic","magic goo","Magigoo","MAGOO","nylon glue","polycarbonate glue","printer glue","pro flex","tpu glue","ZOHO UPDATED"],"price":164999,"price_min":164999,"price_max":164999,"available":true,"price_varies":false,"compare_at_price":239999,"compare_at_price_min":239999,"compare_at_price_max":239999,"compare_at_price_varies":false,"variants":[{"id":39497523331158,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3D9001-PF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Magigoo Pro Flex - 3d printing glue","public_title":null,"options":["Default Title"],"price":164999,"weight":150,"compare_at_price":239999,"inventory_management":"shopify","barcode":"3D9001-PF","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PF.jpg?v=1633276850","\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PF-3.jpg?v=1633276850","\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PF-2.jpg?v=1633276850"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PF.jpg?v=1633276850","options":["Title"],"media":[{"alt":"Magigoo Pro Flex - 3D Printing Glue","id":21368379113558,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1920,"width":1920,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PF.jpg?v=1633276850"},"aspect_ratio":1.0,"height":1920,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PF.jpg?v=1633276850","width":1920},{"alt":"Magigoo Pro Flex - 3D Printing Glue","id":21368379080790,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PF-3.jpg?v=1633276850"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PF-3.jpg?v=1633276850","width":1000},{"alt":"Magigoo Pro Flex - 3D Printing Glue","id":21368379048022,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PF-2.jpg?v=1633276850"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/3D9001-PF-2.jpg?v=1633276850","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWHAT:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eMagigoo Pro-Flex is designed for professional use, to work exclusively with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer and TPC (thermoplastic copolyester) filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWHY:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTPUs, TPEs\/TPCs describe a group of polymers that are sometimes referred to as thermoplastic rubbers. Thermoplastic rubbers exist as co-polymers or a polymer blend, generally of a plastic and a rubber. This imparts both thermoplastic and elastomeric properties. As a result, these materials have the advantage of being able to stretch to moderate elongations and returning to the original shape.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAdditionally, these materials have very good thermal properties, material stability, chemical resistance, and are more cost-effective to produce. As a result, these materials are highly sought in industrial applications.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSome flexible filaments show lower adhesion to conventional 3D-printing build surfaces and a high tendency to warp. Others tend to stick too well to bare 3D printing surfaces such as glass and PEI. Magigoo Pro-Flex is a specialized solution for FDM printing of flexible filaments which was developed to work with a wide number of flexible filament types. Magigoo Pro-Flex acts as an intermediate layer between the build-plate and the printed part enabling good adhesion and facilitating print removal as required.\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eHow\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHOW:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMagigoo Pro-Flex has been designed and tested to work with different flexible filament brands.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe bottle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eaccording to the filament\/printer manufacturers recommendations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow to cool and Remove\u003c\/strong\u003e. The print should pop right off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Use a damp cloth to wipe off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSafety \u0026amp; Tips\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSAFETY:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUsing this product with other than Flexible type filaments might cause over adhesion and damage your build surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor larger prints and filaments with a high shrinkage rate, a 20 mm brim is recommended.\u003c\/p\u003e\n\u003cp\u003eIn cases of excess adhesion, it is recommended to wet print bed with a small amount of water slowly work it below the part, this should make part removal easier.\u003c\/p\u003e"}
