The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.
Logic supply voltage (VCC) can be in the range of 2.7--5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).
This little board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
Team is suppotive and solves all the queries .
The product is good and will surely help me in my project...looking forward for more trades with think robotics.
{"id":6620686188630,"title":"TB6612FNG \/ TB6612 Dual Motor Driver 1A","handle":"tb6612fng-tb6612-dual-motor-driver-1a","description":"\u003cp data-mce-fragment=\"1\"\u003eThe TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLogic supply voltage (VCC) can be in the range of 2.7--5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis little board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1\" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.\u003c\/p\u003e","published_at":"2022-12-06T11:11:58+05:30","created_at":"2021-08-24T11:35:18+05:30","vendor":"ThinkRobotics","type":"","tags":["arduino motor driver","Arduino motor shield","DC motor driver","drv8833","elc4","ELC4020","Motor driver","Motor Driver Module","Motor driver Shield","motor drivers","MTR-DRV","servo motor drivers","stepper motor driver","TB6612","TB6612FNG","ZOHO UPDATED"],"price":18999,"price_min":18999,"price_max":18999,"available":false,"price_varies":false,"compare_at_price":23500,"compare_at_price_min":23500,"compare_at_price_max":23500,"compare_at_price_varies":false,"variants":[{"id":39516300476502,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ELC4020","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"TB6612FNG \/ TB6612 Dual Motor Driver 1A","public_title":null,"options":["Default Title"],"price":18999,"weight":20,"compare_at_price":23500,"inventory_management":"shopify","barcode":"ELC4020","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/H74271a04d9a948cd83d14b6e4f780242P.jpg?v=1629785446"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/H74271a04d9a948cd83d14b6e4f780242P.jpg?v=1629785446","options":["Title"],"media":[{"alt":"TB6612FNG \/ TB6612 Dual Motor Driver 1A","id":21212640149590,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1360,"width":1360,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/H74271a04d9a948cd83d14b6e4f780242P.jpg?v=1629785446"},"aspect_ratio":1.0,"height":1360,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/H74271a04d9a948cd83d14b6e4f780242P.jpg?v=1629785446","width":1360}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003eThe TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLogic supply voltage (VCC) can be in the range of 2.7--5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis little board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1\" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.\u003c\/p\u003e"}
