This is an ideal storage solution for Raspberry Pi 3 Model B+ or Raspberry Pi 4, offering dual mSATA SSD Shield, it supports 2 picese of mSATA SSD working at the same time, with USB3.1 Gen 1 port, SSD sequential write speed >300MB/s, use the new USB 3.0 connector.
Features
Ideal storage solution for Raspberry Pi - Dual MSATA SSD Shield
Supports up to 2TB MSSD solid-state drive (SSD)
Supports 2 MSATA SSD working at the same time
Supports operating system installation and booting from your SSD
Provides additional 2 USB ports for Raspberry Pi
Powers the Raspberry Pi via on-board XH2.54 connector - Only one power adapter required
Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
Integrated USB 3.1 Gen 1 Hub Controller
USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
Quick file transfer with high-speed USB3.0 5Gb/s connectivity from a PC or a Mac
Specially-made USB3.0 jumper to connect with Raspberry Pi - no additional cables needed
LED blue indicator indicates drive status
Fully compatible with X735 for intelligent and safe power management
PCB Size: 107.5mm x 85mm
IMPORTANT NOTES
USB3.1 Gen 1 port, SSD sequential write speed >300MB/s
mSATA SSD is not included
As with all SSDs, new media must be formatted before use
Performance depends on host system, workload, and SSD media used
SSDs use exceptionally high performance storage media that will run hot when under load
Older SSD drives with less efficient flash media may not perform as well as newer drives
Power Supply: 5.1Vdc +/-5% , 4A
(Please use an external DC jack power supply to power X852 if the hard disk cannot be recognized.)
Three Kind of Power Supply Mode:
Use DC 5V 4A power adapter with DC jack to power the X852, use 2Pin cable to connect Raspberry Pi GPIO and X852 (recommended).
Use DC 5V 4A power adapter with DC jack to power the X735 (you need to purchase X735 seperately), use 2pin cable to connect X735 and X852 (recommend)
Use common power adapter power Raspberry Pi via RPi micro USB, use 2Pin cable to connect Raspberry Pi GPIO and X852, this is not recommended. As the Raspberry Pi micro USB only support Max. 2.5A, so the X852 maybe not get enough current to recognize the SSD. Although this power supply mode is ok to power the kit, it is not be recommended strongly to use this mode.
Ports & Connectors
USB socket - USB 3.0 type A x 1
DC jack - 5.5x2.5mm x 1
Power input / output connector - XH2.54 2-pin x 1
Packing List
1 x X852 Board (Not include Raspberry pi 3 model B+)
{"id":6672647520342,"title":"X852 Dual MSATA SSD Shield","handle":"x852-dual-msata-ssd-shield-online","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis is an ideal storage solution for Raspberry Pi 3 Model B+ or Raspberry Pi 4, offering dual mSATA SSD Shield, it s\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eupports 2 picese of mSATA SSD working at the same time, with \u003c\/span\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i2.3fb076d6lbZ5KJ\" data-mce-fragment=\"1\"\u003eUSB3.1 Gen 1 port, SSD sequential write speed \u0026gt;300MB\/s, use the new USB 3.0 connector.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eIdeal storage solution for Raspberry Pi - Dual MSATA SSD Shield\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports up to 2TB MSSD solid-state drive (SSD)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports 2 MSATA SSD working at the same time\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports operating system installation and booting from your SSD\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProvides additional 2 USB ports for Raspberry Pi\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePowers the Raspberry Pi via on-board XH2.54 connector - Only one power adapter required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIntegrated USB 3.1 Gen1 to SATA 6Gb\/s bridge controller\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIntegrated USB 3.1 Gen 1 Hub Controller\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUSB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuick file transfer with high-speed USB3.0 5Gb\/s connectivity from a PC or a Mac\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSpecially-made USB3.0 jumper to connect with Raspberry Pi - no additional cables needed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLED blue indicator indicates drive status\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFully compatible with X735 for intelligent and safe power management\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePCB Size: 107.5mm x 85mm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eIMPORTANT NOTES\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eUSB3.1 Gen 1 port, SSD sequential write speed \u0026gt;300MB\/s\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003emSATA SSD is not included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAs with all SSDs, new media must be formatted before use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePerformance depends on host system, workload, and SSD media used\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSSDs use exceptionally high performance storage media that will run hot when under load\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOlder SSD drives with less efficient flash media may not perform as well as newer drives\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower Supply: \u003c\/strong\u003e\u003cu\u003e\u003cspan\u003e5.1Vdc +\/-5% , 4A\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(Please use an external DC jack power supply to power X852 if the hard disk cannot be recognized.)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eThree Kind of Power Supply Mode:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003e\u003cspan\u003eUse DC 5V 4A power adapter with DC jack to power the X852, use 2Pin cable to connect Raspberry Pi GPIO and X852 \u003cspan style=\"color: #ff2a00;\"\u003e(recommended)\u003c\/span\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUse DC 5V 4A power adapter with DC jack to power the X735 (you need to purchase X735 seperately), use 2pin cable to connect X735 and X852 \u003cspan style=\"color: #ff2a00;\"\u003e(recommend)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUse common power adapter power Raspberry Pi via RPi micro USB, use 2Pin cable to connect Raspberry Pi GPIO and X852, \u003cspan style=\"color: #ff2a00;\"\u003ethis is not recommended\u003c\/span\u003e. As the Raspberry Pi micro USB only support Max. 2.5A, so the X852 maybe not get enough current to recognize the SSD. Although this power supply mode is ok to power the kit, it is not be recommended strongly to use this mode.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e\u003cspan\u003ePorts \u0026amp; Connectors\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eUSB socket - USB 3.0 type A x 1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDC jack - 5.5x2.5mm x 1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePower input \/ output connector - XH2.54 2-pin x 1\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003ePacking List\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 x X852 Board (Not include Raspberry pi 3 model B+)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x USB3.0 Connector\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x USB 3.0 A-Male to A-Male Data cable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-spm-anchor-id=\"a2g0o.detail.1000023.i4.3fb076d6lbZ5KJ\"\u003e\u003cspan\u003e1 x Screws Pack\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2022-12-06T11:07:20+05:30","created_at":"2021-11-16T22:01:55+05:30","vendor":"ThinkRobotics.in","type":"","tags":["dual msata","MEM-SSD","msata","raspberry","Raspberry Pi","raspberry pi 3 model b","Raspberry Pi 3B","raspberry pi 4","Raspberry pi 4 1GB","Raspberry pi 4 2GB","Raspberry pi 4 4GB","Raspberry pi 4 8GB","raspberry pi hat","RPIHAT","SATA","sbc2","SSD","SSD Shield","X852"],"price":419999,"price_min":419999,"price_max":419999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39624735162454,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SBC2049","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"X852 Dual MSATA SSD Shield","public_title":null,"options":["Default Title"],"price":419999,"weight":100,"compare_at_price":null,"inventory_management":"shopify","barcode":"39624735162454","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/HTB1.zGqTCzqK1RjSZFLq6An2XXa4.jpg?v=1637080349","\/\/thinkrobotics.com\/cdn\/shop\/products\/HTB1.QqKTxYaK1RjSZFnq6y80pXaw.jpg?v=1637080349"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/HTB1.zGqTCzqK1RjSZFLq6An2XXa4.jpg?v=1637080349","options":["Title"],"media":[{"alt":"X852 Dual MSATA SSD Shield Online","id":21607502151766,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/HTB1.zGqTCzqK1RjSZFLq6An2XXa4.jpg?v=1637080349"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/HTB1.zGqTCzqK1RjSZFLq6An2XXa4.jpg?v=1637080349","width":1000},{"alt":"X852 Dual MSATA SSD Shield Online","id":21607502118998,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/HTB1.QqKTxYaK1RjSZFnq6y80pXaw.jpg?v=1637080349"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/HTB1.QqKTxYaK1RjSZFnq6y80pXaw.jpg?v=1637080349","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis is an ideal storage solution for Raspberry Pi 3 Model B+ or Raspberry Pi 4, offering dual mSATA SSD Shield, it s\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eupports 2 picese of mSATA SSD working at the same time, with \u003c\/span\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i2.3fb076d6lbZ5KJ\" data-mce-fragment=\"1\"\u003eUSB3.1 Gen 1 port, SSD sequential write speed \u0026gt;300MB\/s, use the new USB 3.0 connector.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eIdeal storage solution for Raspberry Pi - Dual MSATA SSD Shield\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports up to 2TB MSSD solid-state drive (SSD)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports 2 MSATA SSD working at the same time\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports operating system installation and booting from your SSD\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProvides additional 2 USB ports for Raspberry Pi\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePowers the Raspberry Pi via on-board XH2.54 connector - Only one power adapter required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIntegrated USB 3.1 Gen1 to SATA 6Gb\/s bridge controller\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIntegrated USB 3.1 Gen 1 Hub Controller\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUSB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuick file transfer with high-speed USB3.0 5Gb\/s connectivity from a PC or a Mac\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSpecially-made USB3.0 jumper to connect with Raspberry Pi - no additional cables needed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLED blue indicator indicates drive status\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFully compatible with X735 for intelligent and safe power management\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePCB Size: 107.5mm x 85mm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eIMPORTANT NOTES\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eUSB3.1 Gen 1 port, SSD sequential write speed \u0026gt;300MB\/s\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003emSATA SSD is not included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAs with all SSDs, new media must be formatted before use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePerformance depends on host system, workload, and SSD media used\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSSDs use exceptionally high performance storage media that will run hot when under load\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOlder SSD drives with less efficient flash media may not perform as well as newer drives\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower Supply: \u003c\/strong\u003e\u003cu\u003e\u003cspan\u003e5.1Vdc +\/-5% , 4A\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(Please use an external DC jack power supply to power X852 if the hard disk cannot be recognized.)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eThree Kind of Power Supply Mode:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003e\u003cspan\u003eUse DC 5V 4A power adapter with DC jack to power the X852, use 2Pin cable to connect Raspberry Pi GPIO and X852 \u003cspan style=\"color: #ff2a00;\"\u003e(recommended)\u003c\/span\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUse DC 5V 4A power adapter with DC jack to power the X735 (you need to purchase X735 seperately), use 2pin cable to connect X735 and X852 \u003cspan style=\"color: #ff2a00;\"\u003e(recommend)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUse common power adapter power Raspberry Pi via RPi micro USB, use 2Pin cable to connect Raspberry Pi GPIO and X852, \u003cspan style=\"color: #ff2a00;\"\u003ethis is not recommended\u003c\/span\u003e. As the Raspberry Pi micro USB only support Max. 2.5A, so the X852 maybe not get enough current to recognize the SSD. Although this power supply mode is ok to power the kit, it is not be recommended strongly to use this mode.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e\u003cspan\u003ePorts \u0026amp; Connectors\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eUSB socket - USB 3.0 type A x 1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDC jack - 5.5x2.5mm x 1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePower input \/ output connector - XH2.54 2-pin x 1\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003ePacking List\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 x X852 Board (Not include Raspberry pi 3 model B+)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x USB3.0 Connector\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x USB 3.0 A-Male to A-Male Data cable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-spm-anchor-id=\"a2g0o.detail.1000023.i4.3fb076d6lbZ5KJ\"\u003e\u003cspan\u003e1 x Screws Pack\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"}
