This quad (4) channel Relay Module operates at 5V TTL signal and is perfect for common Arduino/Raspberry Pi control applications.
This is a 5V 4-Channel Relay interface board which can switch up to 10Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is flyback diode which will further protect your microcontroller from relay kick back.
Details:
Equipped with four high-current relay 250VAC@10A / 30VDC@10A
Active Low Trigger Operation
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
Trigger current: 5mA
Working voltage: 5V
Module size: 50 x 26 x 18.5mm (L x W x H)
Four mounting bolts holes, diameter 3.1mm
Screw terminals (Terminal Block) provided (C, NC , NO) for quick and easy connection
Flyback diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
LED Status indicators to indicate the relay ON/OFF status.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Shopping Cart
{"id":1419027349576,"title":"4 Channel Relay Module Breakout Board (5V)","handle":"4-channel-relay-module-shield-5v","description":"\u003cp\u003eThis quad (4) channel Relay Module operates at 5V TTL signal and is perfect for common Arduino\/Raspberry Pi control applications.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is a 5V 4-Channel Relay interface board\u003c\/span\u003e which can switch up to 10Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is flyback diode which will further protect your microcontroller from relay kick back.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with four high-current relay 250VAC@10A \/ 30VDC@10A\u003c\/li\u003e\n\u003cli\u003eActive Low Trigger Operation\u003c\/li\u003e\n\u003cli\u003eIt can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc\u003c\/li\u003e\n\u003cli\u003eTrigger current: 5mA\u003c\/li\u003e\n\u003cli\u003eWorking voltage: 5V\u003c\/li\u003e\n\u003cli\u003eModule size: 50 x 26 x 18.5mm (L x W x H)\u003c\/li\u003e\n\u003cli\u003eFour mounting bolts holes, diameter 3.1mm\u003c\/li\u003e\n\u003cli\u003eScrew terminals (Terminal Block) provided (C, NC , NO) for quick and easy connection\u003c\/li\u003e\n\u003cli\u003eFlyback diode to protect your microcontroller\u003c\/li\u003e\n\u003cli\u003eInput Signal Pin connected to Burg stick for easy accessibility\u003c\/li\u003e\n\u003cli\u003eLED Status indicators to indicate the relay ON\/OFF status.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/FA7GMT7I4SCV8UP.LARGE_480x480.jpg?v=1593028045\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/unnamed_3_480x480.png?v=1593028078\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch5\u003eResources\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC3001\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/LIBRARIES\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC3001\"\u003eSample Code\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTutorial\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/sWiflR1LzV8\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Tjh-cnH4klo\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2022-12-06T11:26:55+05:30","created_at":"2018-09-04T16:10:07+05:30","vendor":"ThinkRobotics","type":"Control Switch","tags":["1 Channel","10A","2-Channel","250VAC","4-channel","5v relay","BRKOUT","Channel","ELC3","quad channel","Relay","RLY-MOD","ZOHO UPDATED"],"price":19999,"price_min":19999,"price_max":19999,"available":false,"price_varies":false,"compare_at_price":39595,"compare_at_price_min":39595,"compare_at_price_max":39595,"compare_at_price_varies":false,"variants":[{"id":12761854640200,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ELC3001","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"4 Channel Relay Module Breakout Board (5V)","public_title":null,"options":["Default Title"],"price":19999,"weight":126,"compare_at_price":39595,"inventory_management":"shopify","barcode":"ELC3001","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1644.jpg?v=1607765284","\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1638.jpg?v=1607765284","\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1640.jpg?v=1607765284","\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1641.jpg?v=1607765284","\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1642.jpg?v=1607765284","\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1643.jpg?v=1607765284"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1644.jpg?v=1607765284","options":["Title"],"media":[{"alt":"4 Channel Relay Module Breakout Board (5V)","id":8481523204182,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1644.jpg?v=1607765284"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1644.jpg?v=1607765284","width":3024},{"alt":"4 Channel Relay Module Breakout Board (5V)","id":8481523040342,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1638.jpg?v=1607765284"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1638.jpg?v=1607765284","width":3024},{"alt":"4 Channel Relay Module Breakout Board (5V)","id":8481523073110,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1640.jpg?v=1607765284"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1640.jpg?v=1607765284","width":3024},{"alt":"4 Channel Relay Module Breakout Board (5V)","id":8481523105878,"position":4,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1641.jpg?v=1607765284"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1641.jpg?v=1607765284","width":3024},{"alt":"4 Channel Relay Module Breakout Board (5V)","id":8481523138646,"position":5,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1642.jpg?v=1607765284"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1642.jpg?v=1607765284","width":3024},{"alt":"4 Channel Relay Module Breakout Board (5V)","id":8481523171414,"position":6,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1643.jpg?v=1607765284"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/IMG_1643.jpg?v=1607765284","width":3024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis quad (4) channel Relay Module operates at 5V TTL signal and is perfect for common Arduino\/Raspberry Pi control applications.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is a 5V 4-Channel Relay interface board\u003c\/span\u003e which can switch up to 10Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is flyback diode which will further protect your microcontroller from relay kick back.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with four high-current relay 250VAC@10A \/ 30VDC@10A\u003c\/li\u003e\n\u003cli\u003eActive Low Trigger Operation\u003c\/li\u003e\n\u003cli\u003eIt can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc\u003c\/li\u003e\n\u003cli\u003eTrigger current: 5mA\u003c\/li\u003e\n\u003cli\u003eWorking voltage: 5V\u003c\/li\u003e\n\u003cli\u003eModule size: 50 x 26 x 18.5mm (L x W x H)\u003c\/li\u003e\n\u003cli\u003eFour mounting bolts holes, diameter 3.1mm\u003c\/li\u003e\n\u003cli\u003eScrew terminals (Terminal Block) provided (C, NC , NO) for quick and easy connection\u003c\/li\u003e\n\u003cli\u003eFlyback diode to protect your microcontroller\u003c\/li\u003e\n\u003cli\u003eInput Signal Pin connected to Burg stick for easy accessibility\u003c\/li\u003e\n\u003cli\u003eLED Status indicators to indicate the relay ON\/OFF status.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/FA7GMT7I4SCV8UP.LARGE_480x480.jpg?v=1593028045\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/unnamed_3_480x480.png?v=1593028078\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch5\u003eResources\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC3001\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/LIBRARIES\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC3001\"\u003eSample Code\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTutorial\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/sWiflR1LzV8\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Tjh-cnH4klo\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cul\u003e\u003c\/ul\u003e"}
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
Team is suppotive and solves all the queries .
The product is good and will surely help me in my project...looking forward for more trades with think robotics.
