3DXFLEX TPU - 90A (1kg)

3DXFLEX™ TPU elastomer is an engineering-grade material that we chose based on its balance of printability, flexibility, chemical resistance, and toughness.

3DXFLEX™ TPU (90A) elastomer is an engineering-grade material that we chose based on its balance of printability, flexibility, chemical resistance, and toughness. 3DXFLEX™ TPU has a hardness of 90A, allowing you to make very tough, impact-resistant, flexible prints. We recommend direct-drive extruders, but experienced users can be successful with Bowden-type drives as well.

Benefits of 3DXFLEX™ TPU (90A) Include:

• High elongation, over 500%
• Shore 90A semi-flex hardness
• Ease of printing compared to similar flexible materials
• Excellent layer bonding
• Outstanding fatigue resistance
• Very low odor emitted while printing
• Low moisture absorption
• Retains flexibility even at low temperature
• Styrene and BPA free

This product contains 1000 grams of filament. 
2.85mm, White Available on order only. (Lead time: <7 days)

Specifications

1.75mm and 2.85mm +/- 0.05mm in diameter

Recommended Print Settings:

• Extruder: 220-240°C
• Bed Temp: 23-40°C
• Bed Prep: Magigoo Bed Prep or 3DXTECH Polyimide Tape gives us the best results
• Heated Chamber: Not required
• Supports: AquaTek™ water-soluble X1 USM Universal Support Material works ideal for complex parts
• Drying Instructions: 65°C for 4 hours

Resouces

• Technical Datasheet