Free Delivery Above ₹999

Best seller

ThinkRobotics

ESP8266 ESP-07 WIFI Serial Transceiver

SKU: ELC8026

₹ 699.99 ~~₹ 900.00~~

In stock | Ready to ship

Chat with us on WhatsApp We reply quickly! Contact Us

ESP8266 ESP-07 WIFI Serial Transceiver₹ 699.99

Ask AI about this product

Open in ChatGPT Open in Claude Open in Gemini

This is WiFi serial transceiver module, based on ESP8266 SoC. The SOC has Integrated TCP/IP protocol stack.It is TTL serial communication interface and its parameters can be set by AT command. It is widely used in networking, smart home project when it is connected to the wifi router. It can be used for remote monitoring of home appliances, bedroom temperature and humidity, controlling home appliances and smart car by the mobile phone.

Features:

Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit)
Working voltage: 4.5V - 5.5V (On-board 3.3V LDO Regulator)
Working current: 240mA(MAX)
Serial port baud rate: 115200 (default), can be modified to other values by AT command
Serial communication format: 8N1
On-board reset button
On-board switch to select UART mode or firmware update mode
Antenna Type: Built-in ceramic antenna is available, and you can also use an external antenna.
Wireless Network Mode: station / softAP / SoftAP + station
Wireless criteria: 802.11 b / g / n
WIFI @ 2.4 GHz, support for WPA / WPA2 security mode

Specifications

Module Model	ESP8266 ESP-07
Package/Case	SMD-16
SPI Flash	Default 8Mbit
Antenna	Built-in ceramic antenna or IPEX
Power Supply Range	Voltage 3.0V ~ 3.6VˈCurrent >300mA
Transmit Power	802.11b: 16±2 dBm (@11Mbps) 802.11g: 14±2 dBm (@54Mbps) 802.11n: 13±2 dBm (@HT20, MCS7)
Receiving Sensitivity	54 Mbps (3/4 64-QAM): -70dBm 6 Mbps (1/2 BPSK): -88dBm CCK, 1 Mbps : -90dBm CCK, 11 Mbps: -85dBm HT20, MCS7 (65 Mbps, 72.2 Mbps): -67dBm
Interface	UART/GPIO/ADC/PWM
IO Port	9
Frequency Range	2412 ~ 2484MHz
UART Baudrate	Support 300 ~ 4608000 bps ˈDefault 115200 bps
Operating Temperature (°C)	-20 ć ~ 85 ć
Security	WEP/WPA-PSK/WPA2-PSK
Length (mm)	21.2
Width (mm)	16
Height (mm)	3
Weight (gm)	10
Shipment Weight	0.01 kg
Shipment Dimensions	8 × 5 × 1 cm

Resources

Datasheet

Tutorials

How do I connect and communicate with this module?

The module uses a TTL serial interface. The default baud rate is 115200 and it can be changed with AT commands. There is an onboard switch to select UART mode or firmware update mode.

What are the power and voltage requirements and how does the onboard regulator help?

It supports 3.3V logic and is compatible with 3.3V and 5V through a level shift circuit. The onboard regulator allows operation from 4.5 to 5.5V. The current during operation can reach up to about 300 mA.

What wireless standards and security are supported?

It supports 802.11 b/g/n at 2.4 GHz. Security supports WEP, WPA-PSK and WPA2-PSK. It can operate in station, softAP, or both modes.

Can I use an external antenna with this module?

Yes. The module ships with a built in ceramic antenna but supports external antenna connectivity via IPEX.

What are common use cases and how do I configure it?

Common uses include remote monitoring and control of home appliances and sensors via wifi. It provides an AT command interface for configuration and uses a UART serial connection for communication with your microcontroller.

A

Admin

Welcome to the discussion thread for ESP8266 ESP-07 WIFI Serial Transceiver
Feel free to ask questions, share tips or report issues.

Discover More In:

ESP Modules → Wifi, Bluetooth & Network Modules → Wireless & IOT →

Category: View all Miscellaneous Electronics

ThinkRobotics

ESP8266 / ESP32S Wireless WiFi + Bluetooth Module NODEMCU

₹ 299.99 ~~₹ 595.00~~

ThinkRobotics

ESP32-CAM-MB ESP32 Serial to WiFi & Bluetooth Development Board With OV2640 Camera

₹ 899.99 ~~₹ 1,499.00~~

Arduino

ESP32 Development Board Compatible with Arduino UNO

₹ 749.99 ~~₹ 885.00~~

ThinkRobotics

WiFi LoRa 32(V2), ESP32 + SX1262 LoRa Node, Meshtastic and LoRaWAN compatible — Phaseout

₹ 2,599.99 ~~₹ 2,999.99~~

Fill out the form below and our team will get back to you with bulk pricing.

Description

Ask AI about this product

Open in ChatGPT Open in Claude Open in Gemini

This is WiFi serial transceiver module, based on ESP8266 SoC. The SOC has Integrated TCP/IP protocol stack.It is TTL serial communication interface and its parameters can be set by AT command. It is widely used in networking, smart home project when it is connected to the wifi router. It can be used for remote monitoring of home appliances, bedroom temperature and humidity, controlling home appliances and smart car by the mobile phone.

Features:

Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit)
Working voltage: 4.5V - 5.5V (On-board 3.3V LDO Regulator)
Working current: 240mA(MAX)
Serial port baud rate: 115200 (default), can be modified to other values by AT command
Serial communication format: 8N1
On-board reset button
On-board switch to select UART mode or firmware update mode
Antenna Type: Built-in ceramic antenna is available, and you can also use an external antenna.
Wireless Network Mode: station / softAP / SoftAP + station
Wireless criteria: 802.11 b / g / n
WIFI @ 2.4 GHz, support for WPA / WPA2 security mode

Specifications

Module Model	ESP8266 ESP-07
Package/Case	SMD-16
SPI Flash	Default 8Mbit
Antenna	Built-in ceramic antenna or IPEX
Power Supply Range	Voltage 3.0V ~ 3.6VˈCurrent >300mA
Transmit Power	802.11b: 16±2 dBm (@11Mbps) 802.11g: 14±2 dBm (@54Mbps) 802.11n: 13±2 dBm (@HT20, MCS7)
Receiving Sensitivity	54 Mbps (3/4 64-QAM): -70dBm 6 Mbps (1/2 BPSK): -88dBm CCK, 1 Mbps : -90dBm CCK, 11 Mbps: -85dBm HT20, MCS7 (65 Mbps, 72.2 Mbps): -67dBm
Interface	UART/GPIO/ADC/PWM
IO Port	9
Frequency Range	2412 ~ 2484MHz
UART Baudrate	Support 300 ~ 4608000 bps ˈDefault 115200 bps
Operating Temperature (°C)	-20 ć ~ 85 ć
Security	WEP/WPA-PSK/WPA2-PSK
Length (mm)	21.2
Width (mm)	16
Height (mm)	3
Weight (gm)	10
Shipment Weight	0.01 kg
Shipment Dimensions	8 × 5 × 1 cm

Resources

Datasheet

Tutorials

FAQ

How do I connect and communicate with this module?

The module uses a TTL serial interface. The default baud rate is 115200 and it can be changed with AT commands. There is an onboard switch to select UART mode or firmware update mode.

What are the power and voltage requirements and how does the onboard regulator help?

It supports 3.3V logic and is compatible with 3.3V and 5V through a level shift circuit. The onboard regulator allows operation from 4.5 to 5.5V. The current during operation can reach up to about 300 mA.

What wireless standards and security are supported?

It supports 802.11 b/g/n at 2.4 GHz. Security supports WEP, WPA-PSK and WPA2-PSK. It can operate in station, softAP, or both modes.

Can I use an external antenna with this module?

Yes. The module ships with a built in ceramic antenna but supports external antenna connectivity via IPEX.

What are common use cases and how do I configure it?

Common uses include remote monitoring and control of home appliances and sensors via wifi. It provides an AT command interface for configuration and uses a UART serial connection for communication with your microcontroller.

Reviews