GNSS L1+L2+L5 Multi-GNSS & Multi-Frequency Active Antenna
GNSS L1+L2+L5 Multi-GNSS & Multi-Frequency Active Antenna
GNSS L1+L2+L5 Multi-GNSS & Multi-Frequency Active Antenna
GNSS L1+L2+L5 Multi-GNSS & Multi-Frequency Active Antenna
Need Support? Click Here
Free Delivery Above ₹999

Best seller

Waveshare

GNSS L1+L2+L5 Multi-GNSS & Multi-Frequency Active Antenna

SKU: WVSH0188

₹ 6,599.99 ₹ 7,499.99

Out of stock

📦 Min order 1
Chat with us on WhatsApp We reply quickly! Contact Us
⏱ This is a pre-order item. We'll ship it as soon as it's back in stock.
GNSS L1+L2+L5 Multi-GNSS & Multi-Frequency Active Antenna₹ 6,599.99
Ask AI about this product
Open in ChatGPT Open in Claude Open in Gemini

 

GNSS L1+L2+L5 Multi-GNSS & Multi-Frequency Active Antenna

Sunproof | High Temperature Tolerance | IP67 Waterproof

Supports Multiple GNSS Such As BD, GPS, GLONASS, Galileo, Etc.

 

Specifications

FREQUENCY RANGE BDS B1/B2/B3
GPS L1/L2/L5
GLONASS G1/G2/G3
GALILEO E1/E2/E5a/E5b/E6		 PHASE CENTER ERROR ±2mm
LNA GAIN 40±2dB POLARISATION Right-Hand Circular Polarization
GAIN 4dBi CONNECTOR SMA-J
VSWR ≤2.0 ANTENNA SIZE 108×76×27mm
OUTPUT IMPEDANCE 50Ω CABLE RG174
WORKING CURRENT ≤45mA CABLE LENGTH 5m
WORKING VOLTAGE DC 3.0~18.0V WORKING TEMPERATURE -40~70˚C
AXIAL RATIO ≤3.0dB STORAGE TEMPERATURE -55~85˚C
NOISE FIGURE ≤1.8dB MOUNTING Magnetic base


 

Application Example

* for reference only, the Raspberry Pi board and GPS HAT are NOT included


 

Application Scenarios

 

Product Show



  

Outline Dimensions

Note: supports mass customization for cable length and antenna connector

What GNSS systems and frequency bands does this antenna support?
The antenna supports multiple GNSS including BD GPS GLONASS and Galileo with L1 L2 and L5 bands for GPS, BDS, GLONASS and E1 E2 E5a E5b E6 for Galileo.
What are the environmental ratings and mounting options?
It is sunproof and high temperature tolerant with IP67 waterproof rating. The working temperature is -40 to 70 degrees C and it uses a magnetic base for mounting.
What are the electrical and interface specifications?
The antenna has 50 ohm output impedance, a SMA J connector, and a 5 meter RG174 cable. It operates from DC 3.0 to 18.0 volts and draws up to 45 mA.
Can this antenna be used with Raspberry Pi or other embedded boards?
The reference indicates use with a Raspberry Pi board and shows the GPS HAT as an example; the GPS HAT is not included with the antenna.
Is it possible to customize cable length or connector type?
Yes, mass customization for cable length and antenna connector is supported.
A
Admin
Welcome to the discussion thread for GNSS L1+L2+L5 Multi-GNSS & Multi-Frequency Active Antenna
Feel free to ask questions, share tips or report issues.
Add Post

For more discussion Click Here

Discover More In:

GPS, GSM, RFID → Waveshare | Official Page → Wifi, Bluetooth & Network Modules →

Category: View similar items (GNSS)

Fill out the form below and our team will get back to you with bulk pricing.

Description
Ask AI about this product
Open in ChatGPT Open in Claude Open in Gemini

 

GNSS L1+L2+L5 Multi-GNSS & Multi-Frequency Active Antenna

Sunproof | High Temperature Tolerance | IP67 Waterproof

Supports Multiple GNSS Such As BD, GPS, GLONASS, Galileo, Etc.

 

Specifications

FREQUENCY RANGE BDS B1/B2/B3
GPS L1/L2/L5
GLONASS G1/G2/G3
GALILEO E1/E2/E5a/E5b/E6		 PHASE CENTER ERROR ±2mm
LNA GAIN 40±2dB POLARISATION Right-Hand Circular Polarization
GAIN 4dBi CONNECTOR SMA-J
VSWR ≤2.0 ANTENNA SIZE 108×76×27mm
OUTPUT IMPEDANCE 50Ω CABLE RG174
WORKING CURRENT ≤45mA CABLE LENGTH 5m
WORKING VOLTAGE DC 3.0~18.0V WORKING TEMPERATURE -40~70˚C
AXIAL RATIO ≤3.0dB STORAGE TEMPERATURE -55~85˚C
NOISE FIGURE ≤1.8dB MOUNTING Magnetic base


 

Application Example

* for reference only, the Raspberry Pi board and GPS HAT are NOT included


 

Application Scenarios

 

Product Show



  

Outline Dimensions

Note: supports mass customization for cable length and antenna connector

FAQ
What GNSS systems and frequency bands does this antenna support?
The antenna supports multiple GNSS including BD GPS GLONASS and Galileo with L1 L2 and L5 bands for GPS, BDS, GLONASS and E1 E2 E5a E5b E6 for Galileo.
What are the environmental ratings and mounting options?
It is sunproof and high temperature tolerant with IP67 waterproof rating. The working temperature is -40 to 70 degrees C and it uses a magnetic base for mounting.
What are the electrical and interface specifications?
The antenna has 50 ohm output impedance, a SMA J connector, and a 5 meter RG174 cable. It operates from DC 3.0 to 18.0 volts and draws up to 45 mA.
Can this antenna be used with Raspberry Pi or other embedded boards?
The reference indicates use with a Raspberry Pi board and shows the GPS HAT as an example; the GPS HAT is not included with the antenna.
Is it possible to customize cable length or connector type?
Yes, mass customization for cable length and antenna connector is supported.
Reviews
Forum
A
Admin
Welcome to the discussion thread for GNSS L1+L2+L5 Multi-GNSS & Multi-Frequency Active Antenna
Feel free to ask questions, share tips or report issues.
Add Post

For more discussion Click Here

Similar Products

Discover More In:

GPS, GSM, RFID → Waveshare | Official Page → Wifi, Bluetooth & Network Modules →

Category: View similar items (GNSS)

Bulk Order

Fill out the form below and our team will get back to you with bulk pricing.

Custom Requirements?

Meet with our team

Related products

Related products

0106-14

Waldom Electonics

0106-14

₹ 2,623.53