Home
3DXTech | Official Page
3DXSTAT ESD-PETG (750 grams)
3DXSTAT™ ESD-PETG
3DXSTAT™ ESD-PETG is an advanced ESD-Safe compound designed for use in critical applications which require electrostatic discharge (ESD) protection. Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes. Target surface resistance: 10^7 to 10^9 Ohm. An alternative to Zortrax Z-ESD.
Benefits of PETG Include:
Superior chemical resistance vs. ABS
Amorphous structure giving it low, near isotropic shrinkage
Low moisture absorption, 3x lower than ABS
Very low odor emitted while printing
Superior ductility vs. ABS
Wide processing range of 230-260°C
Benefits of 3DXSTAT™ Include:
Consistent surface resistivity
Improved retention of impact & elongation
Low particulate contamination
Minimal contribution to outgassing and ionic contamination
Chemical Resistance of PETG:
Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic.
Typical ESD-PETG Applications Include:
Semi-con: HDD Components, Wafer Handling, Jigs, Casings, & Connectors
Industrial: Conveying, Metering, and Sensing Applications
Target Conductivity for 3DXSTAT ESD-PETG:
10^7 to 10^9 ohm surface resistivity on 3DP sample using concentric ring test method.
Note: Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity. Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry. Therefore, expect some trial time to understand how this filament works in your specific printer / application. However, please do not exceed 270°C to reduce the risk of polymer degradation.
Surface Conductivity as a Function of Extruder Temperature:
The surface resistance of the printed ESD-safe part will vary depending on the printer’s extruder temperature. For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity. Therefore, the surface resistance can be ‘dialed-in’ by adjusting the extruder temperature up or down depending on the reading you receive on your part.
Filament Specifications:
1.75mm and 2.85mm +/- 0.05mm in diameter
Recommended Print Settings:
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
{"id":6692578558038,"title":"3DXSTAT ESD-PETG (750 grams)","handle":"3dxstat-esd-petg","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e3DXSTAT™ ESD-PETG\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003e3DXSTAT™ ESD-PETG is an advanced ESD-Safe compound designed for use in critical applications which require electrostatic discharge (ESD) protection. Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes. Target surface resistance: 10^7 to 10^9 Ohm.\u003cspan data-mce-fragment=\"1\"\u003e An alternative to Zortrax Z-ESD.\u003c\/span\u003e\u003c\/p\u003e\n\u003csection data-mce-fragment=\"1\" id=\"section_69565463\" class=\"section\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"bg section-bg fill bg-fill bg-loaded bg-loaded\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003ctable align=\"center\" width=\"80%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Ext-Temp-1_100x100.jpg?v=1633022891\" alt=\"\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 100px;\" data-mce-style=\"text-align: center; width: 100px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Bed-Temp_100x100.jpg?v=1633022914\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 132.859375px;\" data-mce-style=\"text-align: center; width: 132.859375px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Chamber-Temp_100x100.jpg?v=1633022932\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 168.71875px;\" data-mce-style=\"width: 168.71875px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Nozzle-Settings_100x100.jpg?v=1633022954\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\" data-mce-style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 121.453125px;\" data-mce-style=\"text-align: center; width: 121.453125px;\"\u003e\n\u003cmeta charset=\"UTF-8\"\u003e \u003cstrong\u003eExtruder Temp: \u003c\/strong\u003e\u003cspan\u003e230-260°C\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 100px;\" data-mce-style=\"text-align: center; width: 100px;\"\u003e\n\u003cmeta charset=\"UTF-8\"\u003e \u003cstrong\u003eBed Temp: \u003c\/strong\u003e\u003cspan\u003e60-90°C\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 132.859375px;\" data-mce-style=\"text-align: center; width: 132.859375px;\"\u003e\n\u003cstrong\u003eHeated Chamber: \u003c\/strong\u003e\u003cspan\u003eNot Required\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 168.71875px;\" data-mce-style=\"text-align: center; width: 168.71875px;\"\u003e\n\u003cstrong\u003eNozzle Specs: \u003c\/strong\u003e\u003cspan\u003eNo special concerns\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 121.453125px; text-align: center;\" data-mce-style=\"width: 121.453125px; text-align: center;\"\u003e\n\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Water-Soluble-Support_100x100.jpg?v=1633023108\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Water-Soluble-Support_100x100.jpg?v=1633023108\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 100px;\" data-mce-style=\"width: 100px;\"\u003e\n\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Drying-Filamen_100x100.jpg?v=1633023125\" data-mce-fragment=\"1\" data-mce-style=\"display: block; margin-left: auto; margin-right: auto;\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Drying-Filamen_100x100.jpg?v=1633023125\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 132.859375px;\" data-mce-style=\"width: 132.859375px;\"\u003e\n\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Layer-Height_100x100.jpg?v=1633023140\" data-mce-fragment=\"1\" data-mce-style=\"display: block; margin-left: auto; margin-right: auto;\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Layer-Height_100x100.jpg?v=1633023140\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 168.71875px; text-align: center;\" data-mce-style=\"width: 168.71875px; text-align: center;\"\u003e\n\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Bed-Adhesion_100x100.jpg?v=1633023155\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Bed-Adhesion_100x100.jpg?v=1633023155\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 121.453125px; text-align: center;\" data-mce-style=\"width: 121.453125px; text-align: center;\"\u003e\n\u003cp\u003e \u003cstrong data-mce-fragment=\"1\"\u003eSupports: \u003c\/strong\u003e\u003ca href=\"https:\/\/www.3dxtech.com\/product\/aquatek-x1-advanced-universal-support-material\/\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.3dxtech.com\/product\/aquatek-x1-advanced-universal-support-material\/\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eX1 Water Soluble Support\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 100px;\" data-mce-style=\"width: 100px;\"\u003e\n\u003cmeta charset=\"UTF-8\"\u003e \u003cstrong\u003eDrying Specs: \u003c\/strong\u003e\u003cspan\u003e65°C for 4+ hours\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 132.859375px;\" data-mce-style=\"width: 132.859375px;\"\u003e\n\u003cstrong\u003eLayer Height: \u003c\/strong\u003e\u003cspan mce-data-marked=\"1\"\u003eNo concern\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 168.71875px; text-align: center;\" data-mce-style=\"width: 168.71875px; text-align: center;\"\u003e\n\u003cp\u003e\u003cstrong\u003eBed Adhesion\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/thinkrobotics.in\/products\/magigoo-3d-printing-adhesive?_pos=3\u0026amp;_sid=112fbcf2c\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan\u003eMagigoo Bed Prep\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/thinkrobotics.in\/products\/nano-polymer-adhesive-100ml-bottle?_pos=1\u0026amp;_psq=nano%20po\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\"\u003e\u003cspan\u003eNano Polymer Adhesive\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eBenefits of PETG Include:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSuperior chemical resistance vs. ABS\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAmorphous structure giving it low, near isotropic shrinkage\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLow moisture absorption, 3x lower than ABS\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVery low odor emitted while printing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSuperior ductility vs. ABS\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWide processing range of 230-260°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col medium-6 large-6\" id=\"col-1266027891\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col-inner\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eBenefits of 3DXSTAT™ Include:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eConsistent surface resistivity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved retention of impact \u0026amp; elongation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLow particulate contamination\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMinimal contribution to outgassing and ionic contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" id=\"row-1944325212\" class=\"row row-box-shadow-2\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col medium-6 large-6\" id=\"col-112045309\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col-inner\"\u003e\n\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" class=\"plain\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" target=\"_blank\"\u003e \u003c\/a\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"icon-box featured-box icon-box-left text-left\"\u003e\n\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" class=\"plain\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" target=\"_blank\"\u003e \u003c\/a\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"icon-box-img\"\u003e\n\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" class=\"plain\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" target=\"_blank\"\u003e \u003c\/a\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"icon\"\u003e\n\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" class=\"plain\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" target=\"_blank\"\u003e \u003c\/a\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"icon-inner\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" class=\"plain\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" target=\"_blank\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"icon-box-text last-reset\"\u003e\n\u003ch5 data-mce-fragment=\"1\" class=\"uppercase\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" class=\"plain\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" target=\"_blank\"\u003eTECHNICAL DATA SHEET\u003c\/a\u003e\u003c\/h5\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col medium-6 large-6\" id=\"col-1543197596\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col-inner\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-SDS-v01.pdf\" class=\"plain\" target=\"_blank\" rel=\"noopener noreferrer\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-SDS-v01.pdf\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"icon-box featured-box icon-box-left text-left\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"icon-box-text last-reset\"\u003e\n\u003ch5 data-mce-fragment=\"1\" class=\"uppercase\"\u003eSAFETY DATA SHEET\u003c\/h5\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eChemical Resistance of PETG:\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUnstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eTypical ESD-PETG Applications Include:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSemi-con: HDD Components, Wafer Handling, Jigs, Casings, \u0026amp; Connectors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIndustrial: Conveying, Metering, and Sensing Applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eTarget Conductivity for 3DXSTAT ESD-PETG:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e10^7 to 10^9 ohm surface resistivity on 3DP sample using concentric ring test method.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNote: Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity. Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry. Therefore, expect some trial time to understand how this filament works in your specific printer \/ application. However, please do not exceed 270°C to reduce the risk of polymer degradation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\" id=\"row-1195818549\" class=\"row row-collapse row-full-width\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col medium-6 large-6\" id=\"col-864450466\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col-inner\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSurface Conductivity as a Function of Extruder Temperature:\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe surface resistance of the printed ESD-safe part will vary depending on the printer’s extruder temperature. For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity. Therefore, the surface resistance can be ‘dialed-in’ by adjusting the extruder temperature up or down depending on the reading you receive on your part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col medium-6 large-6\" id=\"col-596600303\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col-inner\"\u003e\n\u003cdiv data-mce-fragment=\"1\" id=\"image_678128117\" class=\"img has-hover x md-x lg-x y md-y lg-y\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"img-inner dark\"\u003e\u003cimg data-mce-fragment=\"1\" title=\"3DXSTAT ESD-PETG esd petg resistance\" sizes=\"(max-width: 774px) 100vw, 774px\" srcset=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2020\/12\/esd-petg-resistance.png 774w, https:\/\/www.3dxtech.com\/wp-content\/uploads\/2020\/12\/esd-petg-resistance-300x209.png 300w, https:\/\/www.3dxtech.com\/wp-content\/uploads\/2020\/12\/esd-petg-resistance-768x535.png 768w, https:\/\/www.3dxtech.com\/wp-content\/uploads\/2020\/12\/esd-petg-resistance-600x418.png 600w, https:\/\/www.3dxtech.com\/wp-content\/uploads\/2020\/12\/esd-petg-resistance-32x22.png 32w\" loading=\"lazy\" alt=\"esd petg resistance\" class=\"attachment-original size-original\" src=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2020\/12\/esd-petg-resistance.png\" height=\"539\" width=\"774\" data-mce-src=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2020\/12\/esd-petg-resistance.png\"\u003e\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFilament Specifications:\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e1.75mm and 2.85mm +\/- 0.05mm in diameter\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eRecommended Print Settings:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExtruder: 230-260°C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBed Temp: 60-90°C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBed Prep: \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/product\/magigoo-3d-printing-bed-prep-adhesives\/\" data-mce-href=\"https:\/\/www.3dxtech.com\/product\/magigoo-3d-printing-bed-prep-adhesives\/\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMagigoo Bed Prep Adhesive\u003c\/span\u003e\u003c\/a\u003e and \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/product\/4mil-polyimide-tape-sheets-5-packs\/\" data-mce-href=\"https:\/\/www.3dxtech.com\/product\/4mil-polyimide-tape-sheets-5-packs\/\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3DXTECH Polyimide Tape\u003c\/span\u003e\u003c\/a\u003e work best for us.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeated Chamber: Not required\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSupports: Water soluble \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/product\/aquatek-x1-advanced-universal-support-material\/\" data-mce-href=\"https:\/\/www.3dxtech.com\/product\/aquatek-x1-advanced-universal-support-material\/\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAquaTek X1 USM\u003c\/span\u003e\u003c\/a\u003e works great for complex parts.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDrying Instructions: 65°C for 4 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","published_at":"2022-12-06T11:05:20+05:30","created_at":"2021-12-28T10:40:19+05:30","vendor":"3DXTech","type":"3D Printer Accessories","tags":["3d filament","3d printer filament","3d printing filament","3d3","3DESD","3DPETG","3DXT","3DXTECH","3dxtech filament","ESD filament","Filament","PETG","PETG filament"],"price":869999,"price_min":869999,"price_max":869999,"available":true,"price_varies":false,"compare_at_price":1199999,"compare_at_price_min":1199999,"compare_at_price_max":1199999,"compare_at_price_varies":false,"variants":[{"id":39729996464214,"title":"1.75mm","option1":"1.75mm","option2":null,"option3":null,"sku":"3D3023-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3DXSTAT ESD-PETG (750 grams) - 1.75mm","public_title":"1.75mm","options":["1.75mm"],"price":869999,"weight":1200,"compare_at_price":1199999,"inventory_management":"shopify","barcode":"39729996464214","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39729996496982,"title":"2.85mm","option1":"2.85mm","option2":null,"option3":null,"sku":"3D3023-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3DXSTAT ESD-PETG (750 grams) - 2.85mm","public_title":"2.85mm","options":["2.85mm"],"price":869999,"weight":1200,"compare_at_price":1199999,"inventory_management":"shopify","barcode":"39729996496982","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/97-ESD-PETG-175mm-Black-1kg-3D-Printer-Filament.png?v=1640668704"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/97-ESD-PETG-175mm-Black-1kg-3D-Printer-Filament.png?v=1640668704","options":["Size"],"media":[{"alt":"3DXSTAT ESD-PETG","id":21783847239766,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/97-ESD-PETG-175mm-Black-1kg-3D-Printer-Filament.png?v=1640668704"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/97-ESD-PETG-175mm-Black-1kg-3D-Printer-Filament.png?v=1640668704","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e3DXSTAT™ ESD-PETG\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003e3DXSTAT™ ESD-PETG is an advanced ESD-Safe compound designed for use in critical applications which require electrostatic discharge (ESD) protection. Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes. Target surface resistance: 10^7 to 10^9 Ohm.\u003cspan data-mce-fragment=\"1\"\u003e An alternative to Zortrax Z-ESD.\u003c\/span\u003e\u003c\/p\u003e\n\u003csection data-mce-fragment=\"1\" id=\"section_69565463\" class=\"section\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"bg section-bg fill bg-fill bg-loaded bg-loaded\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003ctable align=\"center\" width=\"80%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Ext-Temp-1_100x100.jpg?v=1633022891\" alt=\"\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 100px;\" data-mce-style=\"text-align: center; width: 100px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Bed-Temp_100x100.jpg?v=1633022914\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 132.859375px;\" data-mce-style=\"text-align: center; width: 132.859375px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Chamber-Temp_100x100.jpg?v=1633022932\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 168.71875px;\" data-mce-style=\"width: 168.71875px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Nozzle-Settings_100x100.jpg?v=1633022954\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\" data-mce-style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 121.453125px;\" data-mce-style=\"text-align: center; width: 121.453125px;\"\u003e\n\u003cmeta charset=\"UTF-8\"\u003e \u003cstrong\u003eExtruder Temp: \u003c\/strong\u003e\u003cspan\u003e230-260°C\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 100px;\" data-mce-style=\"text-align: center; width: 100px;\"\u003e\n\u003cmeta charset=\"UTF-8\"\u003e \u003cstrong\u003eBed Temp: \u003c\/strong\u003e\u003cspan\u003e60-90°C\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 132.859375px;\" data-mce-style=\"text-align: center; width: 132.859375px;\"\u003e\n\u003cstrong\u003eHeated Chamber: \u003c\/strong\u003e\u003cspan\u003eNot Required\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 168.71875px;\" data-mce-style=\"text-align: center; width: 168.71875px;\"\u003e\n\u003cstrong\u003eNozzle Specs: \u003c\/strong\u003e\u003cspan\u003eNo special concerns\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 121.453125px; text-align: center;\" data-mce-style=\"width: 121.453125px; text-align: center;\"\u003e\n\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Water-Soluble-Support_100x100.jpg?v=1633023108\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Water-Soluble-Support_100x100.jpg?v=1633023108\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 100px;\" data-mce-style=\"width: 100px;\"\u003e\n\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Drying-Filamen_100x100.jpg?v=1633023125\" data-mce-fragment=\"1\" data-mce-style=\"display: block; margin-left: auto; margin-right: auto;\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Drying-Filamen_100x100.jpg?v=1633023125\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 132.859375px;\" data-mce-style=\"width: 132.859375px;\"\u003e\n\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Layer-Height_100x100.jpg?v=1633023140\" data-mce-fragment=\"1\" data-mce-style=\"display: block; margin-left: auto; margin-right: auto;\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Layer-Height_100x100.jpg?v=1633023140\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 168.71875px; text-align: center;\" data-mce-style=\"width: 168.71875px; text-align: center;\"\u003e\n\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Bed-Adhesion_100x100.jpg?v=1633023155\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/Bed-Adhesion_100x100.jpg?v=1633023155\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 121.453125px; text-align: center;\" data-mce-style=\"width: 121.453125px; text-align: center;\"\u003e\n\u003cp\u003e \u003cstrong data-mce-fragment=\"1\"\u003eSupports: \u003c\/strong\u003e\u003ca href=\"https:\/\/www.3dxtech.com\/product\/aquatek-x1-advanced-universal-support-material\/\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.3dxtech.com\/product\/aquatek-x1-advanced-universal-support-material\/\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eX1 Water Soluble Support\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 100px;\" data-mce-style=\"width: 100px;\"\u003e\n\u003cmeta charset=\"UTF-8\"\u003e \u003cstrong\u003eDrying Specs: \u003c\/strong\u003e\u003cspan\u003e65°C for 4+ hours\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 132.859375px;\" data-mce-style=\"width: 132.859375px;\"\u003e\n\u003cstrong\u003eLayer Height: \u003c\/strong\u003e\u003cspan mce-data-marked=\"1\"\u003eNo concern\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 168.71875px; text-align: center;\" data-mce-style=\"width: 168.71875px; text-align: center;\"\u003e\n\u003cp\u003e\u003cstrong\u003eBed Adhesion\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/thinkrobotics.in\/products\/magigoo-3d-printing-adhesive?_pos=3\u0026amp;_sid=112fbcf2c\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan\u003eMagigoo Bed Prep\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/thinkrobotics.in\/products\/nano-polymer-adhesive-100ml-bottle?_pos=1\u0026amp;_psq=nano%20po\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\"\u003e\u003cspan\u003eNano Polymer Adhesive\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eBenefits of PETG Include:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSuperior chemical resistance vs. ABS\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAmorphous structure giving it low, near isotropic shrinkage\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLow moisture absorption, 3x lower than ABS\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVery low odor emitted while printing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSuperior ductility vs. ABS\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWide processing range of 230-260°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col medium-6 large-6\" id=\"col-1266027891\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col-inner\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eBenefits of 3DXSTAT™ Include:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eConsistent surface resistivity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved retention of impact \u0026amp; elongation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLow particulate contamination\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMinimal contribution to outgassing and ionic contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" id=\"row-1944325212\" class=\"row row-box-shadow-2\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col medium-6 large-6\" id=\"col-112045309\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col-inner\"\u003e\n\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" class=\"plain\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" target=\"_blank\"\u003e \u003c\/a\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"icon-box featured-box icon-box-left text-left\"\u003e\n\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" class=\"plain\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" target=\"_blank\"\u003e \u003c\/a\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"icon-box-img\"\u003e\n\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" class=\"plain\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" target=\"_blank\"\u003e \u003c\/a\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"icon\"\u003e\n\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" class=\"plain\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" target=\"_blank\"\u003e \u003c\/a\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"icon-inner\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" class=\"plain\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" target=\"_blank\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"icon-box-text last-reset\"\u003e\n\u003ch5 data-mce-fragment=\"1\" class=\"uppercase\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" class=\"plain\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-TDS-v03.pdf\" target=\"_blank\"\u003eTECHNICAL DATA SHEET\u003c\/a\u003e\u003c\/h5\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col medium-6 large-6\" id=\"col-1543197596\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col-inner\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-SDS-v01.pdf\" class=\"plain\" target=\"_blank\" rel=\"noopener noreferrer\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/03\/ESD-PETG-SDS-v01.pdf\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"icon-box featured-box icon-box-left text-left\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"icon-box-text last-reset\"\u003e\n\u003ch5 data-mce-fragment=\"1\" class=\"uppercase\"\u003eSAFETY DATA SHEET\u003c\/h5\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eChemical Resistance of PETG:\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUnstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eTypical ESD-PETG Applications Include:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSemi-con: HDD Components, Wafer Handling, Jigs, Casings, \u0026amp; Connectors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIndustrial: Conveying, Metering, and Sensing Applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eTarget Conductivity for 3DXSTAT ESD-PETG:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e10^7 to 10^9 ohm surface resistivity on 3DP sample using concentric ring test method.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNote: Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity. Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry. Therefore, expect some trial time to understand how this filament works in your specific printer \/ application. However, please do not exceed 270°C to reduce the risk of polymer degradation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\" id=\"row-1195818549\" class=\"row row-collapse row-full-width\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col medium-6 large-6\" id=\"col-864450466\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col-inner\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSurface Conductivity as a Function of Extruder Temperature:\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe surface resistance of the printed ESD-safe part will vary depending on the printer’s extruder temperature. For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity. Therefore, the surface resistance can be ‘dialed-in’ by adjusting the extruder temperature up or down depending on the reading you receive on your part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col medium-6 large-6\" id=\"col-596600303\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col-inner\"\u003e\n\u003cdiv data-mce-fragment=\"1\" id=\"image_678128117\" class=\"img has-hover x md-x lg-x y md-y lg-y\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"img-inner dark\"\u003e\u003cimg data-mce-fragment=\"1\" title=\"3DXSTAT ESD-PETG esd petg resistance\" sizes=\"(max-width: 774px) 100vw, 774px\" srcset=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2020\/12\/esd-petg-resistance.png 774w, https:\/\/www.3dxtech.com\/wp-content\/uploads\/2020\/12\/esd-petg-resistance-300x209.png 300w, https:\/\/www.3dxtech.com\/wp-content\/uploads\/2020\/12\/esd-petg-resistance-768x535.png 768w, https:\/\/www.3dxtech.com\/wp-content\/uploads\/2020\/12\/esd-petg-resistance-600x418.png 600w, https:\/\/www.3dxtech.com\/wp-content\/uploads\/2020\/12\/esd-petg-resistance-32x22.png 32w\" loading=\"lazy\" alt=\"esd petg resistance\" class=\"attachment-original size-original\" src=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2020\/12\/esd-petg-resistance.png\" height=\"539\" width=\"774\" data-mce-src=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2020\/12\/esd-petg-resistance.png\"\u003e\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFilament Specifications:\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e1.75mm and 2.85mm +\/- 0.05mm in diameter\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eRecommended Print Settings:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExtruder: 230-260°C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBed Temp: 60-90°C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBed Prep: \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/product\/magigoo-3d-printing-bed-prep-adhesives\/\" data-mce-href=\"https:\/\/www.3dxtech.com\/product\/magigoo-3d-printing-bed-prep-adhesives\/\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMagigoo Bed Prep Adhesive\u003c\/span\u003e\u003c\/a\u003e and \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/product\/4mil-polyimide-tape-sheets-5-packs\/\" data-mce-href=\"https:\/\/www.3dxtech.com\/product\/4mil-polyimide-tape-sheets-5-packs\/\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3DXTECH Polyimide Tape\u003c\/span\u003e\u003c\/a\u003e work best for us.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeated Chamber: Not required\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSupports: Water soluble \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.3dxtech.com\/product\/aquatek-x1-advanced-universal-support-material\/\" data-mce-href=\"https:\/\/www.3dxtech.com\/product\/aquatek-x1-advanced-universal-support-material\/\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAquaTek X1 USM\u003c\/span\u003e\u003c\/a\u003e works great for complex parts.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDrying Instructions: 65°C for 4 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e"}
{
"product_id": 6692578558038,
"variant_id" : 39729996464214,
"variant_available" : true,
"inventory_quantity" : 8,
"inventory_management" : "shopify",
"inventory_policy" : "continue",
"image": "//thinkrobotics.com/cdn/shop/products/97-ESD-PETG-175mm-Black-1kg-3D-Printer-Filament.png?v=1640668704",
"price": "869999",
"title": "1.75mm",
"value": "1.75mm"
}
{
"product_id": 6692578558038,
"variant_id" : 39729996496982,
"variant_available" : true,
"inventory_quantity" : 5,
"inventory_management" : "shopify",
"inventory_policy" : "continue",
"image": "//thinkrobotics.com/cdn/shop/products/97-ESD-PETG-175mm-Black-1kg-3D-Printer-Filament.png?v=1640668704",
"price": "869999",
"title": "2.85mm",
"value": "2.85mm"
}
India
---
Australia
Canada
India
Mexico
United States
